Products

Paracril P3350CC2 is a particulate version of Paraclean 33L50 using calcium carbonate with 2% of calcium stearate as a partitioning agent.

Calprene 711 is a new 70/30 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a radial structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color. Calprene 711 is a BHT* and nonylphenol free SBS, FDA approved and especially suitable for food contact applications.Calprene 711 develops high viscosity compound and requires being formulated with complementary antioxidants. (Consult our Technical Service Department for supporting information),Calprene 711 is supplied in porous crumb.*(BHT content in pure polymer less than 30ppm).

Emulprene 1006 is a hot emulsion styrene-butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant.

Emulprene 1006CR is a crumb hot emulsion styrene-Butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 7% and 12% of Calcium Carbonate is used as dusting agent.

Emulprene 10101A is a cross-linked emulsion styrene-butadiene copolymer with divinyl-benzene, using a mix of rosin and fatty acid as emulsifier. It is coagulated with Aluminum-acid and stabilized with a non-staining antioxidant. It is produced in accordance with good manufacturing practices and complies with FDA 21 CFR §175.300, §177.1210 and §178.3910 for use in food contact applications.

Emulprene 1011CR is a crumb of hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant. This rubber is produced as free flowing dusted crumb which eliminates the need for size reduction equipment. Between 4% and 12% of Calcium Carbonate is used as dusting agent.

Calprene 419 is a 70/30 butadiene/styrene thermoplastic copolymer, polymerized in solution and has a radial structure.This product is available in: - Calprene 419 porous crumb. - Calprene 419M powder form dusted with amorphous silica.

Calprene H6140 is a 69/31 ethylene-butylene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure with excellent ozone resistance.This product is available in: - Calprene H6144 porous crumbs. - Calprene H6144 P powder form dusted WITH amorphous silica. - Calprene H6144 PH powder form WITHOUT any dusting agent.

Calprene 718 is a new 75/25 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a radial structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color.Calprene 718 offers good processability and develops softer compounds when compared to other linear SBS grades. This grade has a 10% of diblock content.Calprene 718 is supplied in porous pellets.

Paracril CLM is a copolymer of butadiene and acrylonitrile, hot polymerized with a non-staining stabilizer.

Emulprene 1013A is a styrene-butadiene copolymer, hot polymerized using a fatty acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process.

Paracril BJ is a copolymer of butadiene and acrylonitrile, hot polymerized with a non-staining stabilizer.

Paracril C3380CC is a particulate version of Paracril BLTM 80 using calcium carbonate as a partitioning agent.

Emulprene 1502A is a styrene-butadiene copolymer, cold polymerized using fatty and rosin acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. The product does not contain nitrosamine promoters.

Paracril C is a copolymer of butadiene and acrylonitrile, hot polymerized with a non-staining stabilizer.

Calprene 7318 is a linear block copolymer of styrene and butadiene, having 32% styrene content, most of it forming a polystyrene block, which gives the polymer a thermoplastic behavior.It has a non-staining antioxidant system; FDA approved for use in food contact applications and is essentially gel free with a very clear color.Calprene 7318 is BHT* and nonylphenol free SBS, according to existent food contact regulations (Europe and America)Calprene 7318 is specially designed for technical compounds and adhesives.It is presented as free flowing porous crumb making easy its handling and dissolution.*(BHT content in pure polymer less than 30ppm).

Calprene 412 is a 69/31 butadiene/styrene thermoplastic copolymer, polymerized in solution and has a radial structure. This product is available in: - Calprene 412 porous pellet. - Calprene 412M powder form dusted with amorphous silica.

Emulprene 1013ACR is a styrene-butadiene copolymer, hot polymerized using a fatty acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. This rubber is produced in free flowing crumb form which eliminates the need for milling, cutting, or grinding equipment. Between 7-12% of Calcium Carbonate is used as dusting agent.

Emulprene 1011 is a hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant.

Arlatex 1372R is an aqueous dispersion of a carboxylated styrene-butadiene copolymer manufactured by polymerization in emulsion. The type of emulsifier is anionic and it is stabilized with a non-staining antioxidant.