Products

ECOPOWER Crosile®172 is a vinyl group and a hydrolyzable 2-methoxy-ethoxy-Silyl group that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many metal oxides. When used as coupling agent, it reduces the sensitivity of the products’ mechanical and electrical properties to heat and/or moisture.

ECOPOWER Crosile®171 Vinyltrimethoxysilane (VTMO) is a silane coupling agent with a Vinyl and hydroxyl groups that can be used to enhance the wettability and improve the superhydrophobic characteristics of different composites.

HT9110 Petroleum Hydrocarbon Resin C9 HT-Series are low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through thermal-polymerization technique. HT9110 is a transparent granular solid with the color of yellow to light brown. HT9110 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

HC9110 is cold polymerization resin with good solubility and adhesive, improve the strength and aging resistance of the rubber, waterproof, alkali resistance to widely use in painting, ink industry.

Silane Coupling Agent Crosile®189 is a colorless clear liquid with light typical odor and easily soluble in ethyl alcohol, acetone, benzene, toluene etc. Insoluble in water. 3-Mercaptopropyltrimethoxysilane is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group

Crosile®1090 is a colorless, nearly odorless low-viscosity liquid. Crosile®1090 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Crosile®1090, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis methanol (VOC) is significantly reduced compared to monomeric vinyl silanes.

HC52100 Petroleum hydrocarbon resin C5 is aliphatic resin with good fluidity, good adhesion, good in other performances. Such as even dispersion, on settlement, weather-proof, smudge resistance, adhesion. HC52100 is not a high polymer but a low polymer with the molecular weight between 300-3000. Featured by acid value, easy mutual solubility, resistant to water, resistant to ethanol and chemicals.

ECOPOWER C9 HC9140 Hydrocarbon Resin is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic-polymerization technique.

HT9120 Petroleum Hydrocarbon Resin C9 HT-Series are low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through thermal-polymerization technique. HT9120 is a transparent granular solid with the color of yellow to light brown. HT9120 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

ECOPOWER HC9130 Hydrocarbon Resin is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic polymerization technique. C9 petroleum resin HC9130 with the molecular weight is among 300-3000. Generally speaking, this kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier. HC9130 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

HT9100 Petroleum Hydrocarbon Resin C9 HT-Series are low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through thermal-polymerization technique. HT9100 is a transparent granular solid with the color of yellow to light brown. HT9100 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

Precipitated silica, a form of synthetic amorphous silicon dioxide, is derived from quartz sand, a crystalline form of silicon dioxide. The physical properties of precipitated silica can be manipulated during the manufacturing process to deliver products with a wide range of performance-enhancing features engineered for many different end-use applications.

C9 HC9120 Hydrocarbon Resin is a low molecular weight thermoplastic aromatic resin. Cold polymerized petroleum resin HC9120 is prepared by low temperature catalytic polymerization of C9 fraction,which is a byproduct of ethylene plant. HC9120 is yellow granular solid, transparent and glossy, with good solubility, mutual solubility, water resistance, insulation, excellent chemical stability to acid and alkali, good adhesion and low thermal conductivity.

Crosile®AK200 is afunctional water-based system adhesion enhancer.Used for enhancing adhesion and adhesion of most common emulsions and substrates such as water-based epoxy, water-based acrylic and water-based polyurethane. Such as: metal, glass, ceramics, concrete and other inorganic base materials.

ECOPOWER C9 HC-9150 Hydrocarbon Resin is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic polymerization technique. HC9150 is a transparent granular solid with the color of light yellow. HC9150 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.