Products

PEL-AMPH™ 2CY-75 is an amphoteric derived from caprylic hydroxyethyl imidazoline. It has excellent wetting and detergent properties while providing low foam. PEL-AMPH™ 2CY-75 has good stability in strongly alkaline and moderately acid systems. It is recommended for use in areas where low foaming detergency is needed such as, dairy cleaning, food processing plants, etc. PEL-AMPH™ 2CY75 is compatible with most all other surfactants. It is also an excellent solubilizer for higher molecular weight surfactants, particularly nonionics. Its low irritation properties make it ideal for personal care wipes.

PEL-AMPH™ 2CSF is a mild amphoteric surfactant with applications in both personal care and industrial cleaners. Due to its excellent coupling properties in personal care products, it is used to couple conditioning agents in shampoos. Its ability to couple nonionic surfactants into high levels of electrolyte makes PEL-AMPH™ 2CSF very useful for built industrial cleaners. It is suggested for systems where sodium chloride would be detrimental to the performance of the final product or would cause corrosion problems. PEL-AMPH™ 2CSF is stable over a broad pH range and is the surfactant of choice in high electrolyte systems.

PEL-AMPH™ 2CSF-CG is both an alcohol-free and salt-free, mild, amphoteric surfactant with applications in both personal care and HI&I. In personal care products, PEL-AMPH™ 2CSF-CG is used to couple conditioning agents into shampoos and body washes. This high foaming surfactant makes an ideal choice when formulating mild shampoos or body washes. Its high buffer capacity also offers utility when formulating neutralizing shampoos that act to remove all relaxer types. PEL-AMPH™ 2CSF-CG is also useful in industrial cleaners due to its ability to couple nonionic surfactants into high levels of electrolytes and its stability over a broad pH range. PEL-AMPH™ 2CSF-CG is the ideal choice for systems where sodium chloride would be detrimental to the performance of the final product or would cause corrosion problems. It also has the potential to reduce the overall irritation of other surfactants.

PEL-AMPH™ OSF is an amphoteric surfactant with applications in industrial cleaners and personal care. It has excellent lubricating properties in addition to modest detergency. Its solubility in non-polar solvents makes it useful as a detergent for anhydrous, solvent-based cleaners. Unlike many other amphoteric surfactants, PEL-AMPH™ OSF contains no sodium chloride by-product. It is suggested for systems where chloride would be detrimental to performance or would cause corrosion problems. PEL-AMPH™ OSF is stable over a broad pH range and is a good choice for water-free cleaning formulations.

PEL-PHOS™ 583 a water soluble phosphate ester that exhibits both hydrotrope and detergent properties. It is an ideal ingredient for coupling nonionics into moderately built, alkaline detergent systems. It finds particular use for metal cleaning. It is compatible with the typical builders used including pyrophosphates, silicates, carbonates, etc.

PEL-SIL™ 648 reduces the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. Even at concentrations as low as 0.01 percent, PEL-SIL™ 648 will reduce surface tension below 23 dynes/cm. It produces very rapid wetting and spreading on hard-to-wet surfaces such as waxy leaves. PEL-SIL™ 648 allows complete coverage with herbicides, insecticides, fungicides and other agricultural chemicals. It is a low molecular weight nonionic silicone polyether surfactant, developed to improve the wetting, spreading and penetration of agricultural chemicals. It may be used as an ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals. PEL-SIL™ 648 meets the requirements of US EPA regulation 40 CFR 180.910 regarding “tolerances and exemption from tolerances for pesticide chemicals in or on raw agricultural commodities.” It is approved for both food and nonfood use.

PEL-AMPH™ CSF is a amphoteric surfactant useful in the formulation of both personal care and industrial cleaners. Due to its mildness and excellent coupling properties, PEL-AMPH™ CSF is used to couple conditioning agents in shampoos. Its ability to couple nonionic surfactants into formulations with high levels of electrolyte makes PEL-AMPH™ CSF very useful for industrial cleaners. PELAMPH CSF is suggested for products where the presence of sodium chloride would be detrimental to the performance of the final product or would cause corrosion problems because the chloride level is essentially nil. It is stable over a broad pH range and is the surfactant of choice in high electrolyte systems.

PEL-AMPH™ ASC is an very low foam surfactant that is stable in both alkaline and acid product media. Versatile and low in viscosity, PEL-AMPH™ ASC is effective at lowering the surface tension of highly alkaline systems and has a high solubility in caustic soda. The low, fast breaking foam of PEL-AMPH™ ASC makes it ideal for hard surface cleaners, steam cleaners and bottle washing where foaming products are difficult to rinse.

PEL-AMPH™ ODP is a 50% active aqueous solution of a low molecular weight amphoteric surfactant. It acts as an effective hydrotrope to couple nonionic surfactants into systems containing high levels of electrolyte. PEL-AMPH™ ODP is a low foamer that provides good detergency in systems that require high cloud points. It is stable in both highly acid and alkaline systems offering utility in acid cleaners and heavily built detergents.