Products

EP 600 Series is a two component 100% (+/- 1%) solids epoxy colored coating designed for applications where a high build colorfast impact resistant floor is needed.

Epoxy Oil Stop Coating 201P is a two component solvent based epoxy coating that exhibits excellent characteristics for coating over petroleum based oil contaminated concrete. This product allows excellent substrate penetration which results in excellent adhesion and is an ideal primer for the oil contaminated concrete substrate.

EP 820 Oil Stop Primer is a two component solvent based epoxy coating that exhibits excellent characteristics for coating over petroleum based oil contaminated concrete. This product allows excellent substrate penetration which results in excellent adhesion and is an ideal primer for the oil contaminated concrete substrate.

EP 606 Flexible Primer Kit for Wood & Concrete is a two component 100% solids epoxy designed for sealing traffic surfaces exposed to vehicular or foot traffic. The toughness and elongation eliminate the need to repair hairline cracks. This product is formulated for use in a broadcast system as the basecoat prior to installing epoxy mortars or other suitable topcoats.

EP 632F Aluminum Oxide #46 Grit Broadcast is used for increasing wear resistance and increase slip resistance. The Aluminum oxide products are high density, coarse crystalline alumina that has been converted to corundum form. As such, they are fully shrunk in the manufacturing process. They are produced by sintering calcined alumina at a temperature just under the fusion point of the aluminum oxide. These aluminum particles are then crushed, graded or screened and then ground to their specific powdered particle size. These particles have a high thermal conductivity and good resistance to thermal and mechanical shock. In addition, these particles have a high heat capacity, high electrical capacity and excellent abrasion resistance.

Water-Based Epoxy Primer 301P is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. 301P has superb chemical resistance, abrasion resistance, and substrate penetration.