Products

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Characteristics: Control reologhy Impact block copolymer polypropylene; excellent impact/stiffness balance; consistent processability lot to lot; high process speed and easy removal of the molded pieces; good superficial gloss; moderately narrow molecular weight distribution; with mold release and antistatic additive. Recommended for: Extrusion compression molding or injection molding processes of closures for carbonated beverages or not, where high stiffness and impact resistance is necessary (warm or cold environmental); housewares; injection molding general purpose applications.

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

ESENTTIA® 12R88A by Esenttia is comprised of Polypropylene Random Copolymer. It is commonly used It is available in Granules form.

Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation to high speed and low water carry-over. Recommended for: Raffia Tapes for woven fabrics in high speed line where needs high tenacity and strength, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

Characteristics: Medium melt flow rate Homopolymer polypropylene with high stiffness. Recommended for: Injection molding of rigid articles, closures, furniture, general purpose injection molding applications.

Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation, low water carry-over. Recommended for: Raffia Tapes for woven fabrics where high tenacity and strength are required, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

Characteristics: Medium melt flow rate Homopolymer polypropylene with good impact/stiffness balance, with antistatic additive. Recommended for: Injection molding of rigid articles, closures, general purpose injection molding applications.

Characteristics: High crystallinity homopolymer polypropylene with excellent mechanical properties and color, stable processability, antistatic and nucleant additives. Recommended for: Manufacture of thermoformed containers (tubs), yogurt containers and packaging and high rigidity disposable dishes, injection appliances, hot filling, and also for extrusion and injection of general purpose items where require these features.

Characteristics: High melt flow rate control reologhy Random copolymer polypropylene with very good optical properties and easy mold filling; fast cycle time; good impact resistance; with clarify and mold release additives. Recommended for: High clarity and good impact resistance injection molding housewares; thin walled injection molding package and general purpose applications where clarity is important.

Characteristics: Homopolymer polypropylene with high stiffness and cleanness with excellent optical properties. Recommended for: Non oriented films with high clarity and stiffness, twist films and films for metallization, general purpose injection molding applications.

Characteristics: Homopolymer polypropylene with stable processability and high cleanness, lot to lot uniformity, excellent gage control, easy stretching and orientation. Recommended for: High speed BOPP lines, it is suitable for metallizable film, films that require excellent transparency and gloss, extrusion and injection molding general purpose applications.

Characteristics: Medium melt flow rate Homopolymer polypropylene with high cleanness and stable processability, good tenacity/elongation balance, gas fading resistant, excellent whiteness. Recommended for: Staple fibers for carpets, blankets and filters, CF and BCF process for ropes, cords, rugs and carpets, general purpose injection molding applications.

Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, easy mold filling, good stiffness/impact balance,, with nucleant and antistatic additives. Recommended for: Injection molding of thin wall rigid containers, fast cycle time, cover electrical appliances, closures, general purpose injection molding applications.

Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, excellent uniformity in the spinning of low-denier fibers at high speed and easy mold filling, good balance "stiffness/impact" Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, extrusion and spinning of low denier fibers, extrusion coating of raffia woven fabrics, Injection thin wall articles and short cycle times, general purpose injection molding applications.

Characteristics: High melt flow rate control reologhy Random copolymer polypropylene with very good optical properties and easy mold filling; fast cycle time; good impact resistance; with clarify and mold release additives. Recommended for: High clarity and good impact resistance injection molding storing boxes (big storage containers); thin walled injection molding package and general purpose applications where clarity is important.

Characteristics: High melt flow rate Homopolymer polypropylene with high stiffness and easy mold filling, with nucleant additive. Recommended for: Injection molding of thin wall rigid containers, fast cycle time, general purpose injection molding applications.

Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, easy mold filling, good stiffness/impact balance. Recommended for: Injection molding of thin wall rigid containers, fast cycle time, general purpose injection molding applications.

Characteristics: Homopolymer polypropylene with high cleanness and stable processability. Recommended for: Solid Pressure Phase Forming (SPPF) of disposable cups, general purpose extrusion and injection molding applications.

Characteristics: High ethylene control reologhy Random copolymer polypropylene; high cleanness and lot to lot uniformity; very good optical properties and gage control; with slip and antiblock additives. Recommended for: Cast and TWQ Films heat seal co-extruded layer; conventional film properties modifier; injection molding general purpose applications.

Characteristics: Random copolymer polypropylene with very good optical properties and easy mold filling; good impact resistance; with clarify additive. Recommended for: High clarity injection molding housewares; injection molding general purpose applications where clarity is important.

Characteristics: Low melt flow rate Homopolymer polypropylene with excellent mechanical properties and color, excellent gage control and high melt strength. Recommended for: Extrusion of strapping, sheets, Cartonplast, extrusion thermoforming, extrusion blow molding of bottles, injection molding of heels, extrusion and injection molding general purpose applications.

Characteristics: High melt flow rate control reologhy Homopolymer polypropylene with good stiffness/impact balance. Recommended for: Injection molding of thin wall rigid containers, fast cycle time, closures, general purpose injection molding applications.

Characteristics: Control reologhy medium melt flow rate Homopolymer polypropylene with high cleanness and stable processability. Recommended for: Staple fibers for carpets and blankets, CF process for medium tenacity fibers, ropes, cords, rugs and carpets, injection molding flip-top closures and general purpose applications.

Characteristics: Homopolymer polypropylene with high crystallinity and high stiffness properties, high barrier and ability to maintain their mechanical properties at high temperatures with high cleaning and processability stable batch to batch consistency, excellent thickness control. Recommended for: Manufacture of biaxial oriented and Cast films of high rigidity, metallized films, raffia ribbons to make big bags, geotextiles, bottles, straws, hoops, ropes, stationery, sheet and thermoformed packaging, extrusion and injection of general purpose items where required these features.

Characteristics: High melt flow rate control reologhy Random copolymer polypropylene with very good optical properties and easy mold filling; good impact resistance; with clarify and mold release additives. Recommended for: Short cycles times injection molding thin walls articles with highly transparency and good impact resistance; injection molding of large or general purpose articles where contact transparency is required.

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Random copolymer polypropylene; lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber. Recommended for: Non woven soft touch fabrics Spunbond process; melt spinning of low denier fibers where it is necessary this properties; extrusion coating of raffia woven fabrics; injection molding general purpose applications.

Characteristics: Control reologhy Impact block copolymer polypropylene; high impact/stiffness balance; good thermal stability and chemicals resistance. Recommended for: Injection molding of batteries cases, buckets, industrial parts, toys, containers; injection and extrusion molding general purpose applications.

Characteristics: High ethylene control reologhy Random copolymer polypropylene; high cleanness and lot to lot uniformity; very good optical properties and gage control; without slip and antiblock additives; ideal for special films formulations; Initial Heat Seal Temperature (IST) below 115 °C on non-treated face. Recommended for: BOPP, Cast and TWQ Films heat seal co-extruded layer; conventional film properties modifier; injection molding general purpose applications.

Characteristics: Control reologhy Impact Block Copolymer polypropylene; high impact/stiffness balance; excellent thermal stability. Recommended for: Injection molding of batteries cases, automotive parts, housewares; injection molding general purpose applications.

Characteristics: Low melt flow rate Impact Block Copolymer polypropylene; very high impact/stiffness balance. Recommended for: Compounding for the automotive industry; sheet extrusion, Cartonplast; high volume extrusion blow molding containers; extrusion thermoforming of containers that require conservation at temperatures below 0°C; extrusion and injection molding general purpose applications.

Characteristics: Control reologhy medium melt flow rate Homopolymer polypropylene with good impact, with antistatic additive. Recommended for: General purpose injection molding applications.

Characteristics: Low melt flow rate Homopolymer polypropylene with excellent mechanical properties and color, excellent gage control and high melt strength. Recommended for: Extrusion of strapping, sheets, Cartonplast, extrusion thermoforming, extrusion blow molding of bottles, injection molding of heels, extrusion and injection molding general purpose applications.

ESENTTIA® 05C05 by Esenttia is comprised of Polypropylene Impact Copolymer. It is commonly used It is available in Granules form.

Characteristics: Homopolymer polypropylene with excellent mechanical properties and color, high processing speed and excellent gage control, with nucleant and mold release additives. Recommended for: Extrusion compression molding of closures for carbonated beverages or not, extrusion and injection molding general purpose applications.

Characteristics: High melt flow rate control reologhy Impact block copolymer polypropylene; good impact/stiffness balance; tough weld line; with nucleant and mold release additives. Recommended for: Injection molding of thin wall rigid containers, fast cycle time; injection molding general purpose applications.