company tower banner

Products

Extrudr

PlasticsProduct Families

3D Printing Polymers

3D Printing Polymers

8 Products found on Extrudr in Plastics

SDSWith SDS

TDSWith TDS

Extrudr Flex Medium Blue banner

Extrudr Flex Medium Blue

Polymer Name:Polycaprolactone (PCL), Thermoplastic Polyester
Processing Methods:Fused Filament Fabrication
End Uses:Toys, Prototyping, Consumer Applications, Industrial Parts, 3D Printing Applications
Density:1190.0 - 1190.0 kg/m³

Extrudr Flex Medium Blue is a durable elastomere based on Polycaprolacton-Polyester. It was specially developed for industrial applications and is ideally suited for the production of elastic and damping components. The material is optimized for the FFF/FDM process in regards to thermal stability and better flow properties. The raw material is compliant according to the REACH- and RoHS-Standards.

Extrudr Flex Semisoft black banner

Extrudr Flex Semisoft black

Polymer Name:Polycaprolactone (PCL), Thermoplastic Polyester
Processing Methods:Fused Filament Fabrication
End Uses:Toys, Prototyping, Consumer Applications, Industrial Parts, 3D Printing Applications
Density:1180.0 - 1180.0 kg/m³

Extrudr Flex Semisoft black is a durable elastomere based on Polycaprolacton-Polyester. It was specially developed for industrial applications and is ideally suited for the production of elastic and damping components. The material is optimized for the FFF/FDM process in regards to thermal stability and better flow properties. The raw material is compliant according to the REACH- and RoHS-Standards.

XPETG MATT Black banner

XPETG MATT Black

Polymer Name:Polyethylene Terephthalate Glycol (PETG)
Processing Methods:3D Printing
End Uses:Consumer Applications, Toys, Industrial Parts, 3D Printing Applications, Prototyping

XPETG MATT Black is one of the world‘s most common thermoplastic polymers. Extrudr XPETG Matt was developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the REACH- and RoHS-Standards.

Extrudr PETG transparent orange banner

Extrudr PETG transparent orange

Polymer Name:Polyethylene Terephthalate Glycol (PETG)
Processing Methods:3D Printing
End Uses:Toys, Prototyping, Consumer Applications, Industrial Parts, 3D Printing Applications
Density:1290.0 - 1290.0 kg/m³
Flexural Modulus:2100.0 - 2100.0 MPa

Extrudr PETG transparent orange is one of the world‘s most common thermoplastic polymers. Extrudr PETG was developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the FDA-, REACH- and RoHS-Standards. PETG is flame retardant according to UL 94 at a wall thickness of 3.2 mm.

Extrudr Flex Hard White banner

Extrudr Flex Hard White

Polymer Name:Polycaprolactone (PCL), Thermoplastic Polyester
Processing Methods:Fused Filament Fabrication
End Uses:Toys, Prototyping, Consumer Applications, Industrial Parts, 3D Printing Applications
Density:1200.0 - 1200.0 kg/m³

Extrudr Flex Hard White is a durable elastomere based on Polycaprolacton-Polyester. It was specially developed for industrial applications and is ideally suited for the production of elastic and damping components. The material is optimized for the FFF/FDM process in regards to thermal stability and better flow properties. The raw material is compliant according to the REACH- and RoHS-Standards.

DuraPro ASA Red banner

DuraPro ASA Red

Polymer Name:Acrylonitrile Styrene Acrylate (ASA)
Processing Methods:Fused Filament Fabrication
End Uses:Toys, Prototyping, Consumer Applications, Industrial Parts, 3D Printing Applications
Density:1050.0 - 1050.0 kg/m³
Flexural Modulus:2300.0 - 2300.0 MPa

DuraPro ASA Red is a weatherproof and UV-resistant copolymer developed for industrial applications. It is characterized by high process reliability and is ideally suited for mechanically highly stressed components. The material is electrically insulating. DuraPro ASA is optimized for good layer adhesion, thermal stability, better flow properties and lower warping tendencies. The raw material is approved according to the REACH-, RoHS- and FDA-Standards.

XPETG CF Carbon banner

XPETG CF Carbon

Density:1410.0 - 1410.0 kg/m³

XPETG CF Carbon is one of the world‘s most common thermoplastic polymers. Extrudr XPETG CF was developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the REACH- and RoHS-Standards. PETG is flame retardant according to UL 94 at a wall thickness of 3.2 mm.

DuraPro ABS Silver banner

DuraPro ABS Silver

Polymer Name:Acrylonitrile Butadiene Styrene (ABS)
Processing Methods:Fused Filament Fabrication
End Uses:Toys, Prototyping, Consumer Applications, Industrial Parts, 3D Printing Applications
Density:1060.0 - 1060.0 kg/m³
Flexural Modulus:2550.0 - 2550.0 MPa

DuraPro ABS Silver was specially developed for industrial applications and is characterized by its high process reliability. It is ideally suited for the production of mechanically highly stressed components. The material is electrically insulating. DuraPro ABS is optimized in regards to good layer adhesion, thermal stability, better flow properties and lower warping tendencies. The raw material is approved according to the REACH-, RoHS- and FDA-Standards.