Products

Greene, Tweed WR® FP100, a reinforced compression-molded polyketone, offers excellent wear resistance with FDA compliance. The typical properties and physical characteristics of WR FP100 make it well suited for use as bushings and wear rings in rotating equipment.WR FP100's FDA compliance allows it to be used in pump applications for drinking water, food processing and pharmaceutical manufacturing.

Greene FKM 926 is a Fluoroelastomer product. It is available in North America.

Greene FKM 927 is a Fluoroelastomer product. It is available in North America.

Sand and other abrasives are often a challenge for pump users in the power industry. Clearances on line shaft bearings and bowl wear rings open up, increasing pump vibrations and reducing pump efficiency. Greene, Tweed's proprietary AR® thermoplastic material exhibits outstanding wear characteristics in media containing solids.AR1 offerss excellent abrasive resistance as well as chemical resistance approaching that of PTFE. AR1 is rated from ambient to 120°F (49°C). AR1 is easy to machine, and clearance requirements are easily determined. AR1 works well in a variety of pumps in the power industry including thouse working with circulating water, open and closed cooing water and river water as well as screen wash pumps. AR materials have performance characteristics that exceed traditional technologies such as cutlass rubber, bronze, and carbon materials.

This product is only available as a finished part, please contact Green, Tweed & Co. to discuss part availability, 215-216-9521.

Chemraz 661 is a Perfluoroelastomer product filled with filler. It is available in North America. Applications of Chemraz 661 include engineering/industrial parts and sealing applications. Primary characteristic: chemical resistant.

Highly reinforced high flow grades for large parts.

Greene FKM 761 is a Fluoroelastomer product. It is available in North America.

This product is only available as a finished part, please contact Green, Tweed & Co. to discuss part availability, 215-216-9521.

WR® 300 is a carbon-fiber reinforced compression molded PEEK™ often selected by pump manufacturers and users for pump bushings and case or impeller wear rings. Maximum service life is achieved in clean. lubricated and/or moist environments.WR 300 allows the pump user to increase pump effiency by running tighter wear ring clearances while decreasing potential pump damage when pumps are cavitated or experience radial bearing failures.

Greene 209 is an Acrylonitrile Butadiene Rubber (NBR) product. It is available in North America.

Chemraz XTR is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz XTR include engineering/industrial parts and sealing applications.Characteristics include: Chemical Resistant Corrosion Resistant Heat Resistant

Greene, Tweed's Voraz™ 511, a perfluoroelastomer, combines good resistance to CVD and etch plasmas with low stiction to enhance process chamber efficiency and increase uptime in FPD and solar applications. Additionally, Greene, Tweed's proprietary (patent pending) Extenis® manufacturing process facilitates the creation of large seals such as those used in Gen 5+ slit valve doors and chamber lids. This unique combination of materials properties and design capability make Voraz 511 a highly engineered seal solution that is optimized to reduce the total cost of tool ownership for FPD and solar process equipment.

Fluoraz® 888 polytetrafluoroethylene/propylene (FEPM) performs will in aggressive chemicals where ultrapure materials are not required. Recommended for conventional wet and dry system applications requiring better chemical resistance than typical fluoroelastomers, Fluoraz 888 has a good field performance history in both dynamic and static applications. Fluoraz 888 remains stable at service temperatures up to 230°C (446°F).

Greene, Tweed offers precision plastics components for a variety of demanding, semiconductor applications. These components are made from a full range of high-performance thermoplastic materials, including our Xycomp® composite materials. Xycomp is ideally suited to replace metal or ceramic compounds due to its high strength, low weight, corrosion resistance and dimensional stability. Xycomp materials may also be used in high-pressure and high-temperature (up to 250°C/482°F) applications.The optimal Xycomp material for a specific application is determined by the unique combination of plastic materials, fibers and fiber orientation, as well as manufacturing techniques. Greene, Tweed provides the necessary application evaluation services to assist in choosing the best performance characteristics.

This product is only available as a finished part, please contact Green, Tweed & Co. to discuss part availability, 215-216-9521.