Products

Flyadd® 3 is an efficient nucleating agent for polyolefins. It is used in homopolymer and copolymer polypropylene and LLDPE films, as well as super high molecular weight polyethylene. The results show that the haze is decreased from 37% to about 10% by adding 0.3% Flyadd® 3 in a homopolymer polypropylene injection molded piece of 2mm thickness, and that of polypropylene random copolymer injection molded piece with the same thickness is decreased to about 6%. By adding 0.2% Flyadd® 3, the haze in LLDPE films can be decreased by not less than 87%. It can be employed in the form of a masterbatch, and in conjunction with white oil or other appropriate dispersant agents directly. The recommended processing temperature range of this product is 250 - 270°C.

Dragonsorb® 3853S functions as a UV absorber. This white or off-white granulated product finds application in the manufacture of PE tapes, injection moldings, sheets, metallocene, PP films, tapes, fibers, TPO polyacetals, ASA, ABS, and HIPS.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Dragonsorb® 3853PP5 is a UV absorber that is mainly used for the following applications: Polyethylene (PE): Flat wire, injection molding, and roll molding products. Polypropylene (PP): Flat wire, film, injection molding products, TPO, polyolefin alloy, hips, ABS, and ASA.

Dragonsorb® 3346 is a UV absorber that offers minimal color contribution. This product has low volatility and very good compatibility with other HALS and UVAs. It possesses a good solubility/migration balance and is mainly used in non-food consumer packaging such as PE and PP films.

Dragonsorb® 3529 is a highly effective light stabilizer. It is suitable for PE films, PP films, and other plastics used as non-food consumer packaging.

Flyadd® B1 is a high-performance β-type nucleator tor polyolefin. It can improve the impact strength and porosity of PP materials. This product is suitable for household appliances, PPR pipes, automobile bumpers, accumulator tanks, batteries, micropore PP fibers, ventilated packaging membranes, lithium battery diaphragms, etc.

Flyadd® KCB functions as an optical brightener. This yellowish granule/crystal powder is used as a good whitening agent for plastic films, injection-molded materials, ethylene vinyl acetate (EVA) foamed plastics, and rubber products. It is insoluble in water, but soluble in ordinary organic solvents.

Dragonox® B1171 is a mixture of hindered phenolic antioxidants and phosphite antioxidants. It can provide polyamide materials with excellent processing and long-term thermal stability, excellent initial resin color, and improved light stability. It is suitable for the stabilization of polyamide and other polymers, mainly used as stabilizers of polyamide injection products, fibers, and films.

Dragonsorb® 622 is a hindered amine light stabilizer that can be used in polyethylene, polypropylene, polyurethane, POM, polyamide, and polyester elastomers. It can also be used in ABS and engineering plastics. This product is approved for food packaging in some countries.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Dragonsorb® 944 imparts excellent light stability in polyolefins (PP, PE, and PVC), PA, polyacetals, and polyester. This product shows excellent compatibility and high resistance to extraction. When used with other HALS, it has an excellent synergistic effect. In addition, it can be used in food packaging materials. HALS944 is now one of the most advanced HALS that is widely used both at home and abroad. 

Dragonsorb® 329 is an effective anti-aging agent with excellent performance. It is soluble in benzene, styrene, and ethyl acetate, slightly soluble in ethanol, and insoluble in water. This substance can absorb UV light of 270 - 340nm and is widely used in PE, PVC, PP, PS, PC, polypropylene fiber, ABS resin, epoxy resin, resin fiber, and vinyl acetate. It can also be used in plastic containers, food packaging boxes, and other packaging materials, providing them with a good light stability effect. The recommended dosage is 0.1% - 0.5%, and for thick products, it is 0.05 - 0.2%.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flyadd® KSN functions as an optical brightener. This yellowish-green crystal powder is used as a good whitening agent for polyester fibers and plastics, polyamide polyacrylonitrile fibers, film, and plastic pressing & injection process. It is insoluble in water, but soluble in ordinary organic solvents.

Dragonsorb® 783 has good compatibility, processing thermal stability, oil resistance, water resistance, and extraction resistance. This product reflects the mechanisms of various light stabilizers and has the best synergistic and complementary effect. It can be used for food packaging and is mainly used for PE agricultural film, polyethylene, polypropylene, polyurethane, polyamide, and polyester elastomers. This product can also be used in ABS and engineering plastics.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Dragonox® CPL is an antioxidant with strong tinting strength. It is mainly used as a compound that protects tints and non-dirt dyes. This product may also be applied in polymer processing to enhance stability. Application Areas Apparels Automotive interiors Medical devices and assemblies Healthcare packaging Coated paper and paperboard