Products

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

Dragonox® 1035 is the world’s most widely used antioxidant for PE and XLPE wires and cable resins. It provides efficient processing stabilization, long-term thermal stability, excellent system compatibility, and low color. Compared with other wire and cable base stabilization antioxidants, Dragonox® 1035 offers better heat stability and is less likely to exude.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 190 is obtained by cracking C9, which mainly contains vinyl toluene, indene, methyl indene, and other unsaturated aromatic compounds. To have the characteristics of both aliphatic and aromatic resins C5 is added in C9, copolymerized, and modified to get C5/C9 copolymer hydrocarbon resin. As a result, this product has improved compatibility with EVA and also has good solubility in various solvents.

Flytac 192 is a water-white thermoplastic resin obtained from the polymerization of aromatic and hydrogenation. It is widely applied in hot melt adhesive (HMA), and pressure sensitive adhesive (PSA) because of its good heat resistance and good compatibility with base polymers such as SIS, EVA, SBS, SEBS, and polyolefin. It can also be used in road marking, BOPP masterbatch, and rubber compounding.