Products

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Dragonox® 168 is a highly effective phosphite antioxidant. It acts as a secondary antioxidant and can be blended with several kinds of primary antioxidants. During processing, this product reacts with hydroperoxides formed by the autoxidation of polymers to improve the effective protection of the polymers' color.

Dragonox® 1098 can be widely used for nylon 6, nylon 66, PE, PP, PA, rubber, and so on. This product is non-discoloring and has low volatility, good extraction resistance in hot water, and a good synergistic effect with general antioxidants. The recommended use level for this product is 0.1－0.5%.

Dragonsorb® 622 is a hindered amine light stabilizer that can be used in polyethylene, polypropylene, polyurethane, POM, polyamide, and polyester elastomers. It can also be used in ABS and engineering plastics. This product is approved for food packaging in some countries.

Flyadd® 3 is an efficient nucleating agent for polyolefins. It is used in homopolymer and copolymer polypropylene and LLDPE films, as well as super high molecular weight polyethylene. The results show that the haze is decreased from 37% to about 10% by adding 0.3% Flyadd® 3 in a homopolymer polypropylene injection molded piece of 2mm thickness, and that of polypropylene random copolymer injection molded piece with the same thickness is decreased to about 6%. By adding 0.2% Flyadd® 3, the haze in LLDPE films can be decreased by not less than 87%. It can be employed in the form of a masterbatch, and in conjunction with white oil or other appropriate dispersant agents directly. The recommended processing temperature range of this product is 250 - 270°C.

Dragonox® CA is a highly effective phenolic antioxidant that is suitable for PP, PE, PVC, polyamide, ABS resin, polystyrene, and cellulosic plastics. This low-volatile substance has high thermal stability and does not decompose during high-temperature processing. It is non-polluting, non-coloring, and can significantly change the heat and oxygen resistance of products. Additionally, this product is used in polyolefin cable products, and it has a good synergistic effect with DLTDP, dstdp, and UV absorbers. The general dosage level of this product is 0.02 - 0.5%.

Dragonsorb® 770 is a hindered amine light stabilizer used for anti-photooxidation aging of polyethylene, polypropylene, and polystyrene products. It also has a good effect on ABS resin, polyurethane, polyester, and other plastics. This product provides good light stability on plastic moldings, even when used in small quantities. When working with antioxidants, it improves heat resistance, and when mixed with other UV absorbers, it provides greater UV resistance.

Dragonox® 626 is a kind of highly effective solid phosphite ester antioxidant. It is often blended with phenolic principal antioxidants (such as AO-1010) to prepare composite antioxidants that improve the thermostability of polymer processing. It is widely applied in PE, PP, PS, PA, PC, ABS, and many other polymer materials. The general dosage of this product is 0.1 - 0.3%.

Dragonox® 1035 is the world’s most widely used antioxidant for PE and XLPE wires and cable resins. It provides efficient processing stabilization, long-term thermal stability, excellent system compatibility, and low color. Compared with other wire and cable base stabilization antioxidants, Dragonox® 1035 offers better heat stability and is less likely to exude.

Dragonsorb® 765 is a UV absorber and light stabilizer that is mainly used for polyethylenes (PE), polypropylenes (PP), polyesters, and coatings.

Dragonox® 1076 is a phenolic primary antioxidant used for processing and long-term thermal stabilization. This product has good heat resistance and water extraction performance. It can be applied to polyolefins, such as polyethylene, polypropylene, and polybutene-1, as well as to other polymers, such as engineering plastics, styrene homo- and copolymers, polyurethanes, elastomers, adhesives, and other organic substrates.

Dragonox® BHT is a phenolic antioxidant that is widely used in polymer materials, petroleum products, and the food processing industry. It is a common rubber antioxidant that has a protective effect on heat and oxygen aging. It is easy to disperse in rubber and can be directly mixed into rubber or added to latex as a dispersion. This volatile product can also be used as a gelling inhibitor in SBR and as an effective stabilizer in polyethylene, polyvinyl chloride (dosage 0.01 - 0.1%), and polyethylene ether.

Dragonsorb® 120 is a sterically hindered hydroxybenzoate UV absorber, which converts UV radiation into heat energy through reversible chemical rearrangement. When compared to benzotriazole UV absorbers, it can provide excellent initial color and has a synergistic effect with hindered amine light stabilizer. It can be used with a hindered phenol antioxidant, a phosphite antioxidant, and a hindered amine light stabilizer at the same time to improve the weatherability of outdoor products. It can also be used simultaneously with benzotriazole UV absorbers to improve the weatherability of products, such as TPO car bumpers. The recommended use level of this product in PP, PE, TPO, PVC, EVA, unsaturated polyester, and ABS is 0.20 - 1.0%.

Dragonox® 3114 is a multi-functional antioxidant with multiple functional groups. It is a kind of low-toxic chemical that can be used in food packaging. This product can be used in ABS resin, polyester, nylon, PE, PS, PVC, PU, cellulose plastic, and rubber. To improve stability, it can be combined with a UV adsorbent or phosphite ester.

Dragonsorb® 783 has good compatibility, processing thermal stability, oil resistance, water resistance, and extraction resistance. This product reflects the mechanisms of various light stabilizers and has the best synergistic and complementary effect. It can be used for food packaging and is mainly used for PE agricultural film, polyethylene, polypropylene, polyurethane, polyamide, and polyester elastomers. This product can also be used in ABS and engineering plastics.

Dragonsorb® 2908 is a highly effective UV absorber for polyethylene, polypropylene, polyvinyl chloride, and acrylonitrile butadiene styrene.

Dragonsorb® 327 is a UV absorber that can strongly absorb 270 ~ 400nm ultraviolet light with low volatility and good chemical stability. The combination of the ultraviolet absorber 327 and an antioxidant has an obvious synergistic effect. This product has excellent heat resistance and washing resistance. It has good compatibility with polyolefin and is suitable for polyethylene, polypropylene, PVC, polymethylmethacrylate, polyformaldehyde, polyurethane, unsaturated polyester, ABS, epoxy resin, cellulose resin, etc. The recommended dosage level of this product in plastic is generally 0.3 - 0.5%.

Flyadd® 127 functions as an optical brightener. This light yellow powder is used as a good whitening agent for various kinds of plastics and their products, especially on products of plastics such as polyvinyl chloride (PVC) and polystyrenes (PS).

Dragonox® 1024 is a primary antioxidant that is characteristic of non-discoloring. This product has a good synergy with general antioxidants and is mainly used in wire and cable insulation. It can be widely used for PE, PP, PA, and so on.

Dragonox® B561 is an antioxidant that has good water resistance, good color protection for resin, and a good synergistic effect with various light stabilizers. It is widely used in polyolefin (PP, PE), PBT, PEF, PVC, polyamide, polycarbonate, ABS resin, etc.

Dragonox® 425 is a highly effective antioxidant used in synthetic resins such as ABS resin, polyethylene, and polypropylene. This product can also be used for light-colored rubber. It provides high anti-oxidation performance, thermal stability, and ultraviolet light stabilization.

Dragonox® B225 is an antioxidant used in polyolefins and olefin-copolymers such as polyethylene, polypropylene, polybutene, and ethylene-vinyl acetate copolymers. The blends can also be used in other polymers such as engineering plastics, styrene homo- and copolymers, polyurethanes, elastomers, adhesives, and other organic substrates. Dragonox®-B225 can be used in combination with light stabilizers.

Dragonox® 1330 is used in polyolefins such as polyethylene, polypropylene, and polybutene for the stabilization of pipes, molded articles, wires, cables, dielectric films, etc. Furthermore, it is applied to other polymers, such as engineering plastics like linear polyesters, polyamides, and styrene homo- and copolymers. This product may also be used in PVC, polyurethanes, elastomers, adhesives, and other organic substrates.

Dragonox® B215 is a good synergistic blend of Dragonox® 1010 and Dragonox® 168. This product can retard the heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It can be widely used for PE, PP, PC, ABS resin, and other petro products.

Flyadd® OB is used for whitening thermoplastic plastics, PVC, PS, PE, PP, ABS, acetate fiber, paint, coating, printing ink, etc. It can be added at any stage during the polymer whitening process to give the finished products a bright bluish-white glaze.

Dragonsorb® 328 is an excellent ultraviolet absorbent with a UVmax of 345nm. It has good polymer solubility and low volatility and is mainly used for PE, PP, PS, PVC, polyester, ABS, and so on. This pale yellowish powder has a melting point of 81°C and is soluble in benzene, toluene, ethyl acetate, and petroleum ether; slightly soluble in ethyl alcohol and methyl alcohol; and insoluble in water.

Dragonsorb® 329 is an effective anti-aging agent with excellent performance. It is soluble in benzene, styrene, and ethyl acetate, slightly soluble in ethanol, and insoluble in water. This substance can absorb UV light of 270 - 340nm and is widely used in PE, PVC, PP, PS, PC, polypropylene fiber, ABS resin, epoxy resin, resin fiber, and vinyl acetate. It can also be used in plastic containers, food packaging boxes, and other packaging materials, providing them with a good light stability effect. The recommended dosage is 0.1% - 0.5%, and for thick products, it is 0.05 - 0.2%.

Dragonsorb® 3853PP5 is a UV absorber that is mainly used for the following applications: Polyethylene (PE): Flat wire, injection molding, and roll molding products. Polypropylene (PP): Flat wire, film, injection molding products, TPO, polyolefin alloy, hips, ABS, and ASA.

Dragonsorb® 3853S functions as a UV absorber. This white or off-white granulated product finds application in the manufacture of PE tapes, injection moldings, sheets, metallocene, PP films, tapes, fibers, TPO polyacetals, ASA, ABS, and HIPS.

Dragonsorb® 1084 is mainly used in polyethylene greenhouse films and agricultural films. It has strong compatibility with polyolefin products, and when used in polyethylene agricultural films and polypropylene artificial turfs, it has high stability. This product has high pesticide and acid resistance and is widely used in polypropylene, polyethylene fiber, artificial turf, and other fields. Additionally, it can be used with other forms of stabilizers, especially UV absorbers.

Dragonox® B900 is a compound of Dragonox® 1076 and Dragonox® 168. It is soluble in benzene, cyclohexane, ethyl acetate, and other organic solvents but insoluble in water. This compound has outstanding processing stability for polyolefins and provides long-term protection for products. Through the synergistic effect of Dragonox® 1076 and Dragonox® 168, it can effectively inhibit the thermal and oxidative degradation of polymers and is widely used in polyethylene, polypropylene, polycarbonate, nylon, ABS resin, and other petrochemical products. The general dosage level of this product is 0.1 - 0.8%.

Dragonsorb® 944 imparts excellent light stability in polyolefins (PP, PE, and PVC), PA, polyacetals, and polyester. This product shows excellent compatibility and high resistance to extraction. When used with other HALS, it has an excellent synergistic effect. In addition, it can be used in food packaging materials. HALS944 is now one of the most advanced HALS that is widely used both at home and abroad. 

Dragonsorb® 3529 is a highly effective light stabilizer. It is suitable for PE films, PP films, and other plastics used as non-food consumer packaging.

Dragonsorb® 791 is a synergistic mixture of oligomeric hindered amine light stabilizers (a mixture of light stabilizers 770 and 944). It is an excellent light stabilizer for thick products, such as car bumpers, dashboards, garden tables and chairs, etc. The synergistic effect between the high molecular weight and low molecular weight hindered amine light stabilizer components in Dragonsorb® 791 maximizes the protection of the polymer from degradation due to UV radiation and long-term heating. Its application fields include PP, PP/EPDM, and PP/PE/EPDM mixture (TPO class).

Dragonsorb® 119 is a polymer hindered amine light stabilizer (HALS), suitable for PE agricultural film, PP fiber and talc-filled PP, and TPO auto parts. This product can also be used in powder coating, which not only brings a triboelectric effect but also light stability. Generally, the addition level ranges between 0.05 and 1%.

Dragonsorb® 3346 is a UV absorber that offers minimal color contribution. This product has low volatility and very good compatibility with other HALS and UVAs. It possesses a good solubility/migration balance and is mainly used in non-food consumer packaging such as PE and PP films.