Products

Dragonsorb® 622 is a hindered amine light stabilizer that can be used in polyethylene, polypropylene, polyurethane, POM, polyamide, and polyester elastomers. It can also be used in ABS and engineering plastics. This product is approved for food packaging in some countries.

Dragonsorb® 944 imparts excellent light stability in polyolefins (PP, PE, and PVC), PA, polyacetals, and polyester. This product shows excellent compatibility and high resistance to extraction. When used with other HALS, it has an excellent synergistic effect. In addition, it can be used in food packaging materials. HALS944 is now one of the most advanced HALS that is widely used both at home and abroad. 

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Dragonsorb® 2908 is a highly effective UV absorber for polyethylene, polypropylene, polyvinyl chloride, and acrylonitrile butadiene styrene.

Dragonsorb® 328 is an excellent ultraviolet absorbent with a UVmax of 345nm. It has good polymer solubility and low volatility and is mainly used for PE, PP, PS, PVC, polyester, ABS, and so on. This pale yellowish powder has a melting point of 81°C and is soluble in benzene, toluene, ethyl acetate, and petroleum ether; slightly soluble in ethyl alcohol and methyl alcohol; and insoluble in water.

Dragonsorb® P is an ultraviolet absorption agent with a maximum absorption wavelength of 270 - 380nm. It is available for polyester, epoxy, cellulose acetate, PVC, polystyrene, plexiglass, polyacrylonitrile resin, etc. The general consumption of this product is 0.1 - 0.5% for thin matter and 0.05 - 0.2% for thick matter.

Flyadd® OB-1 is an optical brightener that is used as a good whitening agent for polyester-cotton blend fabric or various kinds of plastics and their products under high temperatures. This product is insoluble in water, but soluble in high boiling point organic solvents such as phenyl-chloride.

Dragonox® PS802 is an effective stabilizer in polyolefins, especially in polypropylene and HDPE. They are usually used in combination with phenolic antioxidants to enhance aging stability and photostability. In most cases, the additive effect is better than the main antioxidant alone, and the initial color of the material will also be improved. It is especially suitable for the stability of high-impact polystyrene and ABS resin. This product also improves the use effect of phenolic antioxidants. Additionally, it can be used in animal and vegetable oils, fats, paraffin, soap, and other organic compounds.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Dragonox® 1076 is a phenolic primary antioxidant used for processing and long-term thermal stabilization. This product has good heat resistance and water extraction performance. It can be applied to polyolefins, such as polyethylene, polypropylene, and polybutene-1, as well as to other polymers, such as engineering plastics, styrene homo- and copolymers, polyurethanes, elastomers, adhesives, and other organic substrates.

Dragonsorb® 120 is a sterically hindered hydroxybenzoate UV absorber, which converts UV radiation into heat energy through reversible chemical rearrangement. When compared to benzotriazole UV absorbers, it can provide excellent initial color and has a synergistic effect with hindered amine light stabilizer. It can be used with a hindered phenol antioxidant, a phosphite antioxidant, and a hindered amine light stabilizer at the same time to improve the weatherability of outdoor products. It can also be used simultaneously with benzotriazole UV absorbers to improve the weatherability of products, such as TPO car bumpers. The recommended use level of this product in PP, PE, TPO, PVC, EVA, unsaturated polyester, and ABS is 0.20 - 1.0%.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flyadd® NA21 is a highly efficient nucleating and clarifying agent for polypropylene, PET, PBT, and polyamides. It provides excellent transparency and improved mechanical properties such as flexural modulus, crystallization temperatures, HDT, and surface hardness in semi-crystalline polymers. This product also has excellent extraction resistance and no plate-out, exudation, or odor during processing.