Products

72307E is a LLDPE produced by the Spherilene Technology 72307E can be used in Extrusion Coating on HDPE Woven Fabric, Aluminum Foil, Jute, Paper & Allied Substrates The precise morphological control achieved during polymerization confers superior processability and improved performance properties not available in conventional LLDPE

73005TU is a LLDPE Roto Molding Grade produced by the Spherilene Technology with controlled morphology, excellent balance of processability, mechanical properties & UV stability This grade is stabilized adequately with Light Stabilizer + to give a long service life under outdoor exposure 73005TU is ideally suited for Tanks & Containers with good UV stability for domestic & industrial water storage, sanitation & agriculture

M6007L is a Narrow MWD HDPE produced by Spherilene Technology M6007L is ideally suited for injection molding of heavy duty Crates & Industrial products The precise control of morphology & MWD during polymerization confers superior processability & improved performance properties compared to conventional HDPE grades

M6007LU is a Narrow MWD HDPE produced by Spherilene Technology M6007LU is ideally suited for injection molding of heavy duty Crates & Industrial products M6007LU is stabilized adequately with HALS+ to give long service life under outdoor exposure The precise control of morphology & MWD during polymerization confers superior processability & improved performance properties compared to conventional HDPE grades

M312 is a Heterophasic Polypropylene Impact Copolymer produced by the Spheripol Technology M312 combines excellent processability with high Flow, low Cycle Time, good Impact – Stiffness balance and good Gloss M312 is recommended for Injection Molded Automotive Components, Housewares, Luggage, Paint Pail, Compounds

P5300 is a pipe grade HDPE, produced by the Mitsui CX Process P5300 combines exceptional processability with high creep resistance, high ESCR and excellent mechanical properties P5300 has MRS 11.2 MPa according to ISO 9080 and is designated PE 112 according to ISO 12162:1995

R103 is a Polypropylene Homopolymer produced by the Spheripol Technology R103 combines exceptional processability with Low Water Carry Over, Excellent Strength & Color R103 is recommended for Stretched Tape Raffia for Woven sacks, FIBC, Ropes & Yarns

M311T is a Heterophasic Polypropylene Impact Copolymer produced by the Spheripol Technology M311T combines excellent processability with high flow, low cycle time, good Impact – Stiffness balance with high Toughness and good Gloss M311T is recommended for Injection Molded Automotive Components, Compounds, Molded Luggage & other Industrial Components

M5005L is a Narrow MWD HDPE produced by Spherilene Technology M5005L is recommended for injection molding of heavy duty Crates, Industrial products and for injection molded as well as extrusion compression molded caps for packaged drinking water The precise control of morphology & MWD during polymerization confers superior processability & improved performance properties compared to conventional HDPE grades

M365 is a Heterophasic Polypropylene Impact Copolymer produced by the Spheripol Technology M365 combines excellent processability with high Flow, low Cycle Time, low Warpage, good Gloss and is adequately nucleated for good Impact - Stiffness balance M365 is recommended for Injection Molded Appliance & White Goods Components, Automotive Components, Thin Walled Injection Molding (TWIM), Compounds

73204T is a LLDPE Roto Molding Grade produced by the Spherilene Technology with controlled morphology, excellent balance of processability, mechanical properties 73204T is ideally suited for Tanks & Containers for domestic & industrial water storage, sanitation & agriculture

HD T9 is a HDPE stretched tape / raffia grade produced by Spherilene Technology This grade can be used for stretched tape / raffia for woven fabrics & tarpaulin HD T9 is characterized by excellent processability and mechanical strength

HD T10 is a HDPE yarn / monofilament grade produced by Spherilene Technology This grade can be used in yarns / monofilament for Fabrics, Nets, Twines & Ropes HD T10 is characterized by excellent processability and mechanical strength

73005T is a LLDPE Roto Molding Grade produced by the Spherilene Technology with controlled morphology, excellent balance of processability, mechanical properties 73005T is ideally suited for Tanks & Containers for domestic & industrial water storage, sanitation & agriculture

P5200 is a pipe grade HDPE, produced by the Mitsui CX Technology This resin is recommended for PE 63 compliant pressure pipes P5200 combines excellent processability with good creep resistance, ESCR and mechanical properties

M340 is a Heterophasic Polypropylene Impact Copolymer produced by the Spheripol Technology M340 combines excellent processability with high Flow, low Cycle Time, excellent Impact – Stiffness balance, Low Warpage and good Gloss M340 is recommended for Injection Molded Appliance & White Goods Components, Automotive omponents, Thin Walled Injection Molding (TWIM), Compounds

F5400 is a film grade HM-HDPE produced by the Mitsui CX Technology

B5500 is a HMHDPE Blow Molding Grade, produced by the Mitsui CX Process B5500 has excelllent processability, high rigidity, excellent mechanical properties and impact resistance and is recommended for medium bulk containers (~ 120 liter) for Chemicals, Detergent, Lube Oils B5500 is also suitable for the manufacture of blow molded water tanks upto 1000 liters. Adequate UV Stabilzer needs to be added externally for usage in outdoor water tank applications

73005TU is a LLDPE Roto Molding Grade produced by the Spherilene Technology with controlled morphology, excellent balance of processability, mechanical properties & UV stability This grade is stabilized adequately with Light Stabilizer + to give a long service life under outdoor exposure 73005TU is ideally suited for Tanks & Containers with good UV stability for domestic & industrial water storage, sanitation & agriculture

M307 is a Heterophasic Polypropylene Impact Copolymer produced by the Spheripol Technology M307 combines excellent processability with low Cycle Time M307 is recommended for General Purpose Injection Molding

M310 is a Heterophasic Polypropylene Impact Copolymer produced by the Spheripol Technology M310 combines excellent processability with high Flow, low Cycle Time, excellent Thermal Stability and good Impact – Stiffness balance M310 is recommended for Injection Molded Battery Box and Industrial Items

P5200 is a pipe grade HDPE, produced by the Mitsui CX Technology This resin is recommended for PE 63 compliant pressure pipes P5200 combines excellent processability with good creep resistance, ESCR and mechanical properties

F135 is a Controlled Rheology Polypropylene Homopolymer produced by Spheripol II Technology F135 combines exceptional processability with high melt flow, narrow molecular weight distribution & gas fading resistance F135 is recommended for spunbond - nonwoven & other extrusion process and is suitable for hygiene products

HD T10S is a HDPE monofilament grade produced by Spherilene Technology This grade can be used in monofilament for Nets, Twines & Ropes HD T10S is characterized by excellent processability and mechanical strength