Products

T-Mulz® 810 is an alcohol-based phosphate ester designed for use in alkaline cleaners, yarn lubricants, and concentrated electrolyte solutions to improve salt tolerance. This product is also used as a hydrotrope that provides detergency, wetting, and coupling. It is compatible with both anionic and nonionic surfactants.

T-Mulz® 565-2 is a blended anionic surfactant designed primarily for making emulsifier systems for agricultural, latex, and industrial formulations. It provides coupling ability, emulsification power, and rapid wetting to the formulation. As supplied, it is a free acid and will react readily with basic compounds.

T-Mulz® A 139 PE is an APE free anionic surfactant primarily used for acrylic, stirene/acrylic and vinyl/acrylic latexes in emulsion polymerization. It can be used as a primary surfactant, or post-added to improve gloss retention, provide particle size control, corrosion inhibition and improved adhesion.

T-Mulz® HP is the phosphate ester of 2-hydroxyethyl methacrylate. It is a reactive monomer that copolymerizes with a wide variety of monomer systems. This product is inhibited with 400 ppm of hydroquinone. It is used to improve latex stability, promote polymer adhesion to various metal substrates, improve film tensile strength, impart antistatic properties to polymers, and improve corrosion resistance.

T-Mulz® 565 is a blended anionic surfactant that is designed primarily for use in emulsifier systems for agricultural and industrial formulations. The chemical properties of this product are similar to T-Mulz® 598, except that it is more hydrophilic. It is compatible with both anionic and nonionic surfactants.

T-Mulz® 596 is a complex, ester-free organic phosphate acid that is recommended for use in areas of emulsion polymerization. This product is compatible with anionic and nonionic surfactants but should not be mixed with concentrated oxidizing or reducing agents, as the mixture of these compounds with organic compounds forms a potentially explosive mixture.

T-Mulz® A 181-4.5 PE is a complex organic phosphate ester that is compatible with anionic and nonionic surfactants. It is highly effective as a lubricant, wetting agent, corrosion inhibitor, dispersant or emulsifier and is often used in lubrication oils, polishing fluids and cutting fluids.

T-Mulz® 786-1 is a phosphate ester that is designed primarily for making emulsifier systems for metal processing, solvent cleaners, and dry cleaning. This non-hazardous surfactant has good dispersion properties and good solubility. It is soluble in perchloroethylene, xylene, ethanol, and kerosene and is readily dispersible in water.

T-Mulz® 66H is the potassium salt of an aromatic phosphate ester. It exhibits good solubility in highly alkaline liquid formulations and functions as an efficient hydrotrope for coupling nonionic surfactants into alkaline systems while simultaneously adding detergency and wetting properties. This product is recommended for use in heavy-duty liquid detergents, all-purpose hard surface cleaners, dry cleaning fluids, agricultural formulations, and textile products.

T-Mulz® A 136 PE is an APE-free anionic surfactant that is primarily used for acrylic, styrene/acrylic, and vinyl/acrylic latexes in emulsion polymerization. It can be used as a primary surfactant or as a post-additional surfactant to improve gloss retention. This product also provides particle size control, corrosion inhibition, and improved adhesion.

T-Mulz® Z 900 is a modified aliphatic amine and a clear to light yellow-colored, low-viscosity epoxy curing additive. The incorporation of T-Mulz® Z 900 into epoxy systems allows for less critical mix ratios and excellent solvent resistance. It can be used across a wide range of applications, including tooling compounds, laminates, automotive body patching compounds, and metal and plastic adhesives.

T-Mulz® ADP is an additive used to improve the adhesion of paint film on non-ferrous substrates such as aluminum, zinc, copper, brass, and electroplated steel. It is typically used in stoving paints and promotes adhesion of stoving paints on difficult non-ferrous substrates. Additionally, it improves the paint films flexibility and impact resistance.

T-Det® XD is a polyalkalene glycol monobutyl ether surface active agent primarily used as an emulsifier and dispersing agent. It is useful in a variety of industrial applications, such as pigment, paper coating, and polymer dispersant. Additionally, it is a good emulsifying agent for aromatic compounds and similar solvents, making it suitable for agricultural, insecticide, and pesticide formulations, as well as latex resin polymerization and metalworking fluids.

T-Mulz® ESHF is the ammonium ether sulfate of a mid-range carbon chain ethoxylate. It is the higher-flash-point version of Foamer ESLF. It has an equally fast wetting time and is supplied as a 58% active product. The active ingredient is supplied in a water/propylene glycol solvent system.

T-Mulz® 734-2 is a blended anionic surfactant designed primarily for making emulsifier systems for agricultural and industrial formulations. This product is an excellent emulsifier for a wide range of solvents. It is particularly good as a solvent emulsifier when hard water is the main problem.

T-Mulz® A 263 PE is a versatile surfactant known for its excellent wetting and lubricating properties. It exhibits high detergency and offers corrosion resistance, making it ideal for industrial applications in the oil, gas, and mining sectors, particularly in exploration and upstream processes.

T-Mulz® 844 M is a phosphate ester designed for use in alkaline cleaners, yarn lubricants, and wet processing. It demonstrates excellent salt tolerance, especially under alkaline conditions. This product also functions well as a hydrotrope and can couple solvent, electrolyte, and surfactant mixtures. Additional benefits of using T-Mulz® 844 M include improved wetting and detergency. This product also finds application as a primary emulsion polymerization surfactant and is well suited to acrylic latexes.

T-Mulz® WAM is a blend of surfactants designed to increase the penetration of water and other nutrients into hard-to-wet soils. It eliminates localized dry spots and can increase plant growth in all types of media. The usage rates depend on local water hardness and are generally 3 - 4 ounces per gallon of water.

T-Mulz® BP-PE is the phosphate ester of a block polymer. It is a low-foaming surfactant that has a cloud point slightly above room temperature. This phosphate ester surfactant can be used in formulations for the metal cleaning and metalworking industries.

T-Mulz® 844 is a phosphate ester designed for use in alkaline cleaners, textiles in yarn lubricants, and wet processing. This product is used in concentrated electrolyte solutions to improve salt tolerance and as a hydrotrope that provides detergency, wetting, and coupling properties.

T-Mulz® P-4LF is a phosphate ester designed for use in alkaline cleaners and hard surface detergents. This product is excellent for metal cleaner formulations due to its low foaming characteristic. This clear, yellow, viscous liquid has a surface tension (0.05% aqueous) of 70 dynes/cm.