Products

PHOTOMER® 2012 (IBOMA) is a very low viscosity monofunctional methacrylated monomer which can be polymerized in the presence of free radicals. It is typically used in UV and EB curable applications.

PHOTOMER® 4012 (IBOA) is a very low viscosity monofunctional acrylated monomer which can be polymerized in the presence of free radicals. It is typically used in UV and EB curable applications.

PHOTOMER® 4356 is a tri-functional acrylated monomer which can be polymerised in the presence of free radicals. This monomer is typically designed for use in UV- and EB curable applications. PHOTOMER® 4356 offers high reactivity, high cross linking density and excellent scratch, abrasion water and chemical resistance and good heat resistance combined with low shrinkage properties and none yellowing properties

PHOTOMER® 4141 (CTFA) is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. This Cyclic Trimethylolpropane Formal Acrylate (CTFA) is typically used in UV and EB curable applications. PHOTOMER® 4141 offers good solvency and very good adhesion properties on metals and plastics.

PHOTOMER® 4094 (GPTA) is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent reactivity. Designed for UV/EB curable systems, it produces films of high crosslink density which are more flexible than those of first generation monomers such as TMPTA without sacrificing cure speed.

PHOTOMER® 4017 (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

PHOTOMER® 4399 is a medium viscosity mixture of penta-acrylate and hexa-acrylate monomer for UV/EB curable coatings and inks on paper, foil, wood and plastic substrates. It imparts excellent abrasion and scratch resistance as well as fast cure response together with good water and chemical resistance when formulated into UV/EB curable applications.

Photomer® 8061 is a novel aliphatic monofunctional acrylate (TPGMEMA) of low skin irritancy, low viscosity, low surface tension and low odor. It exhibits good solvency and viscosity reducing characteristics with typical UV/EB curable oligomers and prepolymers.

Photomer® 4158 is a high molecular weight analog of ethoxylated TMPTA (Photomer® 4149). Because of its increased ethoxylate content, Photomer® 4158 exhibits greater hydrophilic characteristics than unmodified acrylate polyols and will provide an excellent starting point for developing water dispersible UV/EB curable inks and coatings.

Photomer® 4071 is a low viscosity and low odor diluent for UV and EB radiation curable varnishes and pigmented coatings like inks as well as for UV inkjet applications.

PHOTOMER® 4808 is a low viscosity, monofunctional acrylated monomer/reactive diluent, for use in radical initiated UV radiation cured coatings, inks and adhesives. PHOTOMER® 4808 has a hydrophobic backbone and exhibits good flexibility and excellent adhesion on non-polar substrates.

PHOTOMER® 4810 is used as mono functional monomer used as a flexibilizing agent in UV Radcure coatings and inks.

Photomer® 4028 exhibits moderately low viscosity, low odor, excellent cure speed and low irritancy. It contributes towards good adhesion, scuff and abrasion resistance properties in UV and EB curable formulations.

PHOTOMER® 4226 TF (DPGDA)is a toluene free aliphatic difunctional acrylate of low viscosity used as diluent for UV and EB radiation curable formulations.

Photomer® 4157 is a medium molecular weight analog of ethoxylated TMPTA. It exhibits good hydrophilicity due to its increased ethoxylate content and thus provides an excellent starting point for developing water dispersible UV/ EB curable inks and coatings.

PHOTOMER® 4072 is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and high crosslinking reactivity. It exhibits less shrinkage and better adhesion to a variety of substrates versus typical first generation crosslinkers, and is recommended as a direct replacement for TMPTA and EOTMPTA in many UV/EB curable applications.

PHOTOMER® 4094 (GPTA) is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent reactivity. Designed for UV/EB curable systems, it produces films of high crosslink density which are more flexible than those of first generation monomers such as TMPTA without sacrificing cure speed.

PHOTOMER® 4046 is a proprietary acid mono functional monomer with medium viscosity. It exhibits excellent adhesion combined with hydrophobic characteristics when used in UV/EB cure laminating adhesives, coatings and inks formulations for various porous and non-porous substrates. It is tested to be non-corrosive.

PHOTOMER® 4226 (DPGDA) is an aliphatic difunctional acrylate of low viscosity used as diluent for UV and EB radiation curable formulations.

Photomer® 4039 is a monofunctional aromatic acrylate of low viscosity, low odor, moderate cure speed and classified as a mild skin irritant. Due to modification of its aromatic backbone, it has been found useful as a flexibilizer and is suggested for UV curable litho, screen and flexographic inks, clear litho coatings, and lacquers.

PHOTOMER® 4335 is a multifunctional monomer which contains a mixture of tri and tetra acrylate. It can be used in a variety of UV curable applications, where a high degree of cross linking is required.

PHOTOMER® 4006 (TMPTA) is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy, polyurethane, and polyester oligomers.

PHOTOMER® 4006 TF (TMPTA) is a toluene free aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy, polyurethane, and polyester oligomers

PHOTOMER® 5310 is a di functional self matting oligomer used in UV/EB curable systems. It has been specially designed to formulate very low gloss UV varnishes. It exhibits of less yellowing and more hardness than PHOTOMER® 5010

Photomer® 4135 is a low odor, low volatility mono-functional acrylated monomer which can be polymerised in the presence of free radicals. It is typically used in UV- and EB curable applications and is particularly suited to use in coatings for optical media.

Photomer® 4361 is an ethoxylated analog of 1,6-hexanediol diacrylate (Photomer® 4017). It is a very low irritation monomer which can be substituted for HDDA due to its comparable solvency characteristics. This monomer can be used as a high performance diluent in UV/EB energy curable coatings and inks.

PHOTOMER® 4142 (THFA) is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. It is typically used in UVand EB curable applications. Photomer 4142 offers good flexibility and toughness, low Tg and excellent solvency.

Photomer® 4035 is a monofunctional aromatic acrylate of low viscosity, moderate odor and good cure speed. Due to the Monofunctional character of its backbone, it has been found useful as a flexibilizer and as an adhesion promoter. Photomer® 4035 is recommended for use in UV/EB curable screen, flexographic inks, clear coatings and lacquers.

PHOTOMER® 4600 is a medium viscosity mixture of penta-acrylate and hexa-acrylate monomer for UV/EB curable coatings and inks on paper, foil, wood and plastic substrates. It imparts excellent abrasion and scratch resistance as well as fast cure response when formulated into UV/EB curable applications.

PHOTOMER® 4017 TF (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

PHOTOMER® 4127 (NPGPODA) is a low viscosity monomer used to dilute oligomers. It exhibits a low surface tension and very good wetting properties. It is particularly suitable for use in UV/EB curable varnishes for industrial uses, graphic arts, as well as screen printing, flexo and other inks on metal, paper/paperboard, plastic and on wood.