Products

Omnistab IN 520 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.

Omnirad 184 is a highly efficient non-yellowing photoinitiator used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional vinyl monomers.

Esacure TZT is particularly indicated for the photo polymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

Omnirad 819 is a versatile photoinitiator for radical polymerization of unsaturated resins upon UV light exposure. It is especially suitable for white pigmented Formulations, the curing of glass-fiber-reinforced polyester/styrene systems and for clear coats for outdoor use in combinations with light stabilizers. Thick section curing is also possible with this photoinitiator.

Esacure ONE is a difunctional alpha-hydroxy ketone photoinitiator. It is a highly reactive difunctional photoinitiator particularly suitable for clear systems. Due to its molecular structure it is particularly suitable for all systems where low VOC, low migration and low extraction values are needed (food packaging).

Omnipol BP is a difunctional benzophenone photoinitiator specifically designed for use in inks and coatings requiring low migration and low volatility. It is particularly suited to use in combination with amine synergists and non-pigmented coatings as an alternative to benzophenone.

Omnirad 2100 is a highly efficient liquid curing agent to initiate radical polymerization of unsaturated resins after exposure to UV light such as those based on a prepolymer – e.g., acrylates and unsaturated polyesters – in combination with mono- or multifunctional monomers as reactive thinners. It is well suitable for formulations in which Omnirad TPO is used. Omnirad 2100 provides all the handling advantages of a liquid product. In thicker coatings Omnirad 2100 offers improved bottom curing compared with that of Omnirad TPO. It is especially suitable for white-pigmented formulations with minimal yellowing after curing and for coatings with low pigment volume concentration. Therefore Omnirad 2100 can be offered in almost all applications as a one-to-one replacement for Omnirad TPO with certain advantages.

Omnipol BL 728 is polymeric photoinitiator blend which contains a high concentration of Omnipol TX in a polymeric carrier. Due to the choice of the components this blend can be easily handled and stored at room temperature.

Omnipol TP is a highly efficient polymeric Type I photoinitiator, based on TPO-L. It is characterized by high reactivity and low odor. Its high molecular weight and low migration potential makes the product suitable for use in food packaging application. Due to its absorption spectrum, it is suitable for UV and LED lamps.

Omnistab OB is a fluorescent whitening agent for plastic, paint, ink and photographic paper. It is efficient and stable at high temperatures.

PHOTOMER® 4250 is a 100% active, multifunctional amine acrylate. This product is primarily used in place of free amines. PHOTOMER® 4250 offers an excellent way to increase system cure speeds, while minimizing amine migration and ink burn-out.

Omnirad 2959 is a highly efficient non-yellowing Type I photoinitiator for the UV curing of systems comprising of unsaturated monomers and prepolymers. It is especially suited where low odor is required and for use in water-borne systems based on acrylate or unsaturated polyester resins. The active hydroxy group can be reacted with suitable functionalized unsaturated resins

Omnirad 2022 is a highly efficient liquid curing agent that is used to initiate radical polymerization of unsaturated resins after exposure to UV light. Omnirad 2022 is the first choice for use in pigmented formulations of all colors, for curing of thick sections or for UV-stabilized clear coatings. Unsaturated resins that are particularly suitable are those based on a prepolymer – e.g., acrylates or unsaturated polyesters – in combination with mono- or multifunctional monomers as reactive diluents. Omnirad 2022 is a photoinitiator mixture with well-balanced surface and through cure.

Omnirad 379 is a highly efficient UV-curing agent used to initiate the photo polymerization of unsaturated prepolymers in combination with mono- or multifunctional monomers. Omnirad 379 is especially suitable for pigmented UV-curable systems, photoresists and printing plates. Its excellent solubility (compared to Omnirad 369) makes it easy to incorporate into nearly all formulations.

Omnirad ITX is a highly effective type II photoinitiator used, in combination with tertiary amine synergists to, initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

Photomer® 4967 is an acrylated amine adduct, which exhibits low viscosity, low odor, improved stability, and excellent compatibility with monomers and oligomers. Cure characteristics and adhesion properties are enhanced when this product is properly formulated with photocatalyst (benzophenone).

Omnivad 280 is a radically curable silicone acrylate utilized in a broad array of UV/EB curable coatings and printing inks. Omnivad 280 provides superior substrate wetting and surface slip by reducing the surface coefficient of friction. It enhances durable anti-mar and anti-blocking performance.

Omnirad BP Flakes is a highly effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

Omnirad 784 is a reactive orange colored solid photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to visible light or UV light. It can be used as the sole initiator or in combination with other initiators and mono or multifunctional monomers as reactive diluents. Omnirad 784 shows photobleaching properties and can be used in both clear and pigmented systems.

Omnirad 907 is a highly efficient photoinitiator which is used to initiate the photo polymerization of unsaturated prepolymers, e.g., acrylates, in combination with mono- or multifunctional vinyl monomers.

Omnistab IN 518 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.

Omnirad 4265 is a highly effective liquid photoinitiator blend, used for UV-polymerisation of suitable resins. Omnirad 4265 is easily incorporated into waterborne formulations.

Omnirad 4PBZ is an effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

Omnipol TX is a difunctional thioxanthone photoinitiator specifically designed for use in inks requiring low migration and low volatility. It is particularly suited to use in offset printing inks as an alternative to Omnirad ITX (Isopropyl thioxanthone) in combination with other photoinitiators and amine synergists.

Omnistab BP 12 UV light absorber is a derivative of 2 hydroxy benzophenone. It retards photo oxidative degradation and so helps prevent the discolouration and delamination of clear coatings.

PHOTOMER® 5028 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4094 (GPTA). It has been designed for use in UV/EB curable formulations for substrates such as wood, paper, plastic and metal. The product can aid adhesion to difficult substrates such as plastics.

Omnirad BL750 is a photo initiator blend for curing clears and white systems by UV LED Lamps at 395 nm.

Omnirad 73 is a highly efficient, low yellowing, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

Esacure KIP 150 is an oligomeric polyfunctional α-hydroxyketone characterized by high reactivity and non-yellowing properties. It is particularly recommended when low VOC, low odor and low yellowing are required characteristic.

PHOTOMER® 5042 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4006. It has been designed to provide adhesion to substrates like metals, wood and plastics such as polyethylene (PE) and polypropylene (PP).

Omnirad BDK is a highly efficient, type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

Esacure KT 55 is a liquid mixture of Esacure TZT (50%) and Esacure KIP 150 (50%). IT is used in combination with a co initiator and is particularly suitable when high reactivity and low yellowing are required.

Esacure TZM is a liquid mixture of Benzophenone (50%) and 4-Methylbenzophenone (50%). It is particularly indicated for the photopolymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

PHOTOMER® 6210 is a proprietary, non-yellowing aliphatic urethane developed for radiation curable systems. This premium oligomer with very low viscosity provides excellent light stability, chemical resistance, abrasion resistance and flexibility. The low viscosity of this urethane acrylate allows formulators wide formulating latitude, permits high oligomer content or lower formulation viscosities. Also this oligomer exhibits low odor, good cure speed and excellent adhesion to various plastic and metal substrates.

Omnivad Mirroflex SB 50 % is a product specifically designed for the Energy Curing coating and ink industry. This product can be used in many applications where high gloss and flexibility are required. Omnivad Mirroflex SB 50% is an outstanding coating modifier for clear and pigmented coatings.

Omnimer ACMO is a low viscosity, monofunctional UV reactive diluent for UV and EB radiation curable formulations. The product exhibits of excellent heat resistance and low odor (due to its low vapor pressure) .