Products

PHOTOMER® 3016-40R is a moderate viscosity, non volatile, acrylic ester derived from a low molecular weight aromatic epoxy resin. The product exhibits very fast cure speed.

Omnipol TX is a difunctional thioxanthone photoinitiator specifically designed for use in inks requiring low migration and low volatility. It is particularly suited to use in offset printing inks as an alternative to Omnirad ITX (Isopropyl thioxanthone) in combination with other photoinitiators and amine synergists.

PHOTOMER® 5028 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4094 (GPTA). It has been designed for use in UV/EB curable formulations for substrates such as wood, paper, plastic and metal. The product can aid adhesion to difficult substrates such as plastics.

Omnistab BP 12 UV light absorber is a derivative of 2 hydroxy benzophenone. It retards photo oxidative degradation and so helps prevent the discolouration and delamination of clear coatings.

PHOTOMER® 4846 is a solution of an adhesion promoter resin dissolved in 1,6-Hexanediol Diacrylate. This clear, low viscosity resin solution imparts enhanced adhesion to various treated plastics and metals. It is also useful for increasing adhesion to metals and foil.

PHOTOMER® 4141 (CTFA) is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. This Cyclic Trimethylolpropane Formal Acrylate (CTFA) is typically used in UV and EB curable applications. PHOTOMER® 4141 offers good solvency and very good adhesion properties on metals and plastics.

Omnirad BL750 is a photo initiator blend for curing clears and white systems by UV LED Lamps at 395 nm.

Esacure KIP 150 is an oligomeric polyfunctional α-hydroxyketone characterized by high reactivity and non-yellowing properties. It is particularly recommended when low VOC, low odor and low yellowing are required characteristic.

Omnirad TPO is a highly efficient, low yellowing, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

PHOTOMER® 4810 is used as mono functional monomer used as a flexibilizing agent in UV Radcure coatings and inks.

Omnipol ASA is a liquid polymeric amine synergist specifically designed for use in inks requiring low migration and low volatility. It is particularly suited to use in combination with low migration Type II photoinitiators as Omnipol BP and TX.

PHOTOMER® 5042 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4006. It has been designed to provide adhesion to substrates like metals, wood and plastics such as polyethylene (PE) and polypropylene (PP).

Photomer® 3016 is a high viscosity, non-volatile, di functional acrylate ester derived from a low molecular weight aromatic epoxy resin. The product exhibits fast cure speed, low odor and low skin irritancy. It is an excellent film former and contributes to unique performance properties typical of epoxy resins in UV/EB curable formulations.

PHOTOMER® 4149 is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

Omnistab LS 292 is a liquid hindered amine light stabilizer (HALS). It provides outstanding light stability to many industrial and automotive coatings, as well as providing long-term stability to a wide variety of polymeric systems including styrene’s, acrylics, polyethylene, polypropylene, and polyurethane.

PHOTOMER® 4399 is a medium viscosity mixture of penta-acrylate and hexa-acrylate monomer for UV/EB curable coatings and inks on paper, foil, wood and plastic substrates. It imparts excellent abrasion and scratch resistance as well as fast cure response together with good water and chemical resistance when formulated into UV/EB curable applications.

Esacure TZM is a liquid mixture of Benzophenone (50%) and 4-Methylbenzophenone (50%). It is particularly indicated for the photopolymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

PHOTOMER® 4017 (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

PHOTOMER® 6210 is a proprietary, non-yellowing aliphatic urethane developed for radiation curable systems. This premium oligomer with very low viscosity provides excellent light stability, chemical resistance, abrasion resistance and flexibility. The low viscosity of this urethane acrylate allows formulators wide formulating latitude, permits high oligomer content or lower formulation viscosities. Also this oligomer exhibits low odor, good cure speed and excellent adhesion to various plastic and metal substrates.

Photomer® 8061 is a novel aliphatic monofunctional acrylate (TPGMEMA) of low skin irritancy, low viscosity, low surface tension and low odor. It exhibits good solvency and viscosity reducing characteristics with typical UV/EB curable oligomers and prepolymers.

Photomer® 4158 is a high molecular weight analog of ethoxylated TMPTA (Photomer® 4149). Because of its increased ethoxylate content, Photomer® 4158 exhibits greater hydrophilic characteristics than unmodified acrylate polyols and will provide an excellent starting point for developing water dispersible UV/EB curable inks and coatings.

PHOTOMER® 2317 is a Hydroxypropyl Methacrylate (HPMA) which provides important properties to polymer products including hydrophilicity, improved adhesion to substrates, and crosslinking sites.

Esacure 1001 M is a difunctional Type II photoinitiator of the ketosulphone class. It is used to initiate radical polymerisation of unsaturated oligomers e.g. acrylates after UV exposure.

Omnirad BDK is a highly efficient, type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

PHOTOMER® 4094 (GPTA) is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent reactivity. Designed for UV/EB curable systems, it produces films of high crosslink density which are more flexible than those of first generation monomers such as TMPTA without sacrificing cure speed.

PHOTOMER® 6019 is a proprietary, non-yellowing aliphatic urethane oligomer developed for UV/EB curable systems. This medium viscosity acrylate resin exhibits good adhesion to flexible plastics, metal and glass. It is Recommended as a primary oligomer for secondary coatings in optical fibers, fiber-optic sensors and light pipes. Excellent weatherability, scratch, scuff and mar resistance are characteristics of this oligomer.

Omnistab 123 is a liquid HALS stabilizer based on aminoether functionality. Its low basicity prevents possible interactions with acidic paint ingredients such as catalysts.

Omnistab 1130 is a liquid type UV absorber especially developed for coatings, and can be used in combination with hindered amine light stabilizers (HALS) such as Omnistab LS 292.

Esacure KT 55 is a liquid mixture of Esacure TZT (50%) and Esacure KIP 150 (50%). IT is used in combination with a co initiator and is particularly suitable when high reactivity and low yellowing are required.

PHOTOMER® 9502 is a full acrylic resin diluted with 25% PHOTOMER® 4061 (TPGDA) and 25% PHOTOMER® 4017 (HDDA). It can provide improved adhesion to difficult substrates, and improve intercoat adhesion.

PHOTOMER® 6644 is a non yellowing di functional aliphatic urethane acrylate, which exhibits of excellent flexibility and elongation.

PHOTOMER® 6621 is a tin free, hexafunctional aliphatic urethane acrylate oligomer which provides very fast cure performance in addition PHOTOMER® 6621 exhibit high hardness and solvent resistance

Omnistab IN 515 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.

Omnimer ACMO is a low viscosity, monofunctional UV reactive diluent for UV and EB radiation curable formulations. The product exhibits of excellent heat resistance and low odor (due to its low vapor pressure) .

PHOTOMER® 5500 is a hyper branched polyester acrylate which exhibits of high functionality (12 – 15) with relatively low viscosity. It provides low shrinkage, good toughness and fast cure speed.

Omnivad Mirroflex SB 50 % is a product specifically designed for the Energy Curing coating and ink industry. This product can be used in many applications where high gloss and flexibility are required. Omnivad Mirroflex SB 50% is an outstanding coating modifier for clear and pigmented coatings.