Products

When your application calls for a general purpose hardener at low temperatures, Amirez 148/024 exceeds all performance expectations, meeting every specification requirement with speed and a greater degree of technical excellence. This low viscosity, fast cure waterborne reactive polyamide adduct has all application angles covered, from floor and wall painting to hygiene coatings.

Amirez 148/055, the perfect cure for formulation challenges. Even better when you discover it's been developed to address high gloss with fast cure, no blushing and water resistance. It creates floor coatings with unrivaled performance characteristics, such as excellent hardness, superb water and chemical resistance. It seals and protects to give high gloss and esthetically pleasing, durable floors.

Amirez 142 allows easy mixing with epoxys onsite. Using Amirez® 142 in your coating formulation helps create a coating that protects, and goes on protecting, for years and years. APEO and formaldehyde free, it promotes excellent chemical resistance. With features such as visible end of pot life, it’s easy to see why it’s the perfect solution for a wide variety of applications.

Bubbling. It’s a problem which pops up time and time again, particularly in areas subject to low temperature and high humidity levels. Fortunately, under these conditions, Aldirez A provides the ability to create primers that remain remarkably resilient and bubble-free. In addition to its exceptional ability to inhibit CO2 generation, formulators are able to accelerate the cure of PU primers, to improve turnaround efficiency, whilst retaining a workable pot life.

A bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in one component PU systems, where it is normally used with aliphatic prepolymers.

Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings. Used in conjunction with low NCO polyurethane prepolymers, this hardener accelerates the cure of the prepolymer through a moisture triggered mechanism to afford cross-linking benefits to the 1K urethane. In addition, it enhances properties such as through cure development and mechanical strength through the elimination of CO2 gassing in high build, high solids PU systems. Incozol EH confers tolerance to the repeated opening of containers and can be used as a versatile curing agent with 2 or 4 functional mix ratios.

Incozol 2 acts as an effective moisture scavenger in polyurethane coatings. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere. Incozol 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content.

Dispurez 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived from Dispurez® 103 exhibit good chemical, stain and hydrolysis resistance, making them particularly suited for automotive and waterproofing applications.

Aldirez BH is a remarkably versatile solution, facilitating sealing and bonding with just one product. It takes moisture-triggered technology to new heights, by allowing bubble-free curing at high temperatures and humidity, whilst ensuring good in-can stability in these application conditions.

Incozol LV is a reactive diluent designed to help producers of polyurethane coatings attain low VOC systems. It is used in the formulation of two component coatings for example, automotive refinish and OEM coatings. Other uses include high solids PU coatings for boats, industrial maintenance, aircraft, anti-graffiti lacquers and waterproof coatings.

Dispurez 101 provides outstanding protection because it is technically equipped to stand up to just about anything; it is a high Tg, crystalline waterborne polyurethane dispersion, with excellent chemical resistance. All of which makes it eminently suitable for protective top coats and lacquers on rigid plastics such as uPVC/ABS/PC.

Dispurez 201 covers all the specification bases. This VOC-free polyurethane dispersion is soft and flexible, with good impact resistance and low temperature flexibility, making it suitable for a wide variety of packaging and laminating applications.

Exhibiting excellent water and chemical resistance, Dispurez® 101A is a hard polyurethane acrylic dispersion, designed for excellent pigment compatibility. Its ease of pigmentability makes it ideal for color coated frames and other tough coatings, bringing dependability and durability to every application.Exhibiting excellent water and chemical resistance, Dispurez 101A is a hard polyurethane acrylic dispersion, designed for excellent pigment compatibility. Its ease of pigmentability makes it ideal for color coated frames and other tough coatings, bringing dependability and durability to every application.