Products

High brightness, work-horse calcined kaolin clay, extremely low crystalline silica content.

The uniform, narrow particle size distribution and excellent color makes Kamin® TEK 2001 the preferred extender for gloss latex paints where optimum TiO2 spacing is desired without adverse effect on gloss.

Coarse kaolin, milled powder, with the lowest oil absorption, for extending without thickening.

KaMin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, Ti02 extension and gloss in water-based paints. KaMin® HG90 is ideally suited for water-borne paint and ink applications, where high brightness and whiteness are important.

KaMin® 80 is an economical, general purpose water-washed kaolin, with intermediate brightness. It is suitable for use in water-borne, solvent-borne and solvent-free paint, ink, and adhesive applications.

KaMin® HG is an economical, general purpose, water-washed kaolin with fine particle size and intermediate brightness. It is suitable for water borne paint, ink and adhesive applications.

KaMin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin® 90 is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important.

Polyplate® P01 is a milled, high brightness, large particle size delaminated kaolin, intended for use in solvent and water-borne coatings, inks, and adhesives. The high aspect ratio of the large platy particles provides improved tinting strength, enamel holdout, and crack resistance.

KaMin® 95 is a medium-brightness, kaolin clay filler for paints, adhesives and related industries. It has a neutral pH, is acid-resistant and environmentally friendly.

Coarsest kaolin with the lowest oil absorption, for excellent extension without frosting in water-based coatings. Spray dried bead form.

Polyplate® HMT is a high brightness, very high aspect ratio, delaminated kaolin, intended for use in water-borne coatings, adhesives, and sealants. The large, platy structure of Polyplate® HMT imparts increased hide, tinting strength, enamel holdout, crack resistance, and reinforcement properties in water-based systems.

KaMin® 80B is an economical, general purpose water-washed kaolin, with intermediate brightness. It is suitable for use in water-borne, solvent-borne and solvent-free paint, ink, and adhesive applications.

KaMin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin®90B is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important.

Polyplate® P is a high brightness, delaminated clay intended for use in latex paints, water flexography inks, water-based adhesives or water-based systems where increased hiding, tinting strength and improved hold out are desirable.

Lithosperse® NextGen is a surface enhanced clay for use in heat-set and sheet-fed inks. It is designed to replace ink resin and ink oil with minimal impact on key ink properties such as ink gloss and ink density.

Naturally Delaminated clay for use in water-based paints and coatings.