company tower banner

Products

KaMin LLC

CASE IngredientsProduct Families

Additives

12 Products found on KaMin LLC in CASE Ingredients

TDSWith TDS

KaMin® 70C banner

Functions:Filler
Chemical Family:Kaolins, Cellulose & Cellulosics
End Uses:Solventborne Sealant, Waterborne Coating, Gelcoat, Top Coat, Solventborne Coating, Solventborne Adhesive
Particle Size:3.2 - 3.2 microns
Oil Absorption:54.0 - 54.0 g/100 g

High brightness, work-horse calcined kaolin clay, extremely low crystalline silica content.

KaMin® 35 banner

Functions:Filler
Chemical Family:Kaolins, Calcium Salts
End Uses:Waterborne Coating, Gelcoat, Top Coat, Solventborne Coating
Particle Size:7.0 - 7.0 microns
Oil Absorption:27.0 - 27.0 g/100 g

Coarse kaolin, milled powder, with the lowest oil absorption, for extending without thickening.

KaMin® HG banner

Functions:Filler
Chemical Family:Kaolins, Cellulose & Cellulosics
End Uses:Waterborne Coating, Flexography Ink, Gelcoat, Waterborne Ink
Particle Size:0.5 - 0.5 microns
Oil Absorption:33.0 - 33.0 g/100 g

KaMin® HG is an economical, general purpose, water-washed kaolin with fine particle size and intermediate brightness. It is suitable for water borne paint, ink and adhesive applications.

KaMin® 80 banner

Functions:Filler
Chemical Family:Kaolins, Cellulose & Cellulosics
End Uses:Solventless & High Solids Coating, Epoxy Coating, Top Coat, Waterborne Sealant, Solventborne Adhesive, Waterborne Ink, Solvent Free (100% Solids) Adhesive, Offset Ink, Waterborne Coating, Flexography Ink, Solventborne Coating, Solventborne Ink
Compatible Polymers & Resins:Epoxies (EP)
Particle Size:2.5 - 2.5 microns
Oil Absorption:42.0 - 42.0 g/100 g

KaMin® 80 is an economical, general purpose water-washed kaolin, with intermediate brightness. It is suitable for use in water-borne, solvent-borne and solvent-free paint, ink, and adhesive applications.

KaMin® HG90 banner

Functions:Filler
Chemical Family:Kaolins, Cellulose & Cellulosics
End Uses:Offset Ink, Waterborne Coating, Gelcoat, Waterborne Ink
Particle Size:0.4 - 0.4 microns
Oil Absorption:42.0 - 42.0 g/100 g

KaMin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, Ti02 extension and gloss in water-based paints. KaMin® HG90 is ideally suited for water-borne paint and ink applications, where high brightness and whiteness are important.

KaMin® 35B banner

Functions:Filler
Chemical Family:Kaolins, Cellulose & Cellulosics
End Uses:Waterborne Coating, Epoxy Coating
Compatible Polymers & Resins:Epoxies (EP)
Particle Size:4.0 - 4.0 microns
Oil Absorption:27.0 - 27.0 g/100 g

Coarsest kaolin with the lowest oil absorption, for excellent extension without frosting in water-based coatings. Spray dried bead form.

KaMin® 90B banner

Functions:Filler
Chemical Family:Kaolins, Cellulose & Cellulosics
End Uses:Waterborne Coating, Gravure Ink, Epoxy Coating, Waterborne Ink
Compatible Polymers & Resins:Epoxies (EP)
Particle Size:1.5 - 1.5 microns
Oil Absorption:43.0 - 43.0 g/100 g

KaMin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin®90B is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important.

Lithosperse® NextGen banner

Lithosperse® NextGen

Functions:Filler
Chemical Family:Kaolins, Cellulose & Cellulosics

Lithosperse® NextGen is a surface enhanced clay for use in heat-set and sheet-fed inks. It is designed to replace ink resin and ink oil with minimal impact on key ink properties such as ink gloss and ink density.

KaMin® 80B banner

Functions:Filler
Chemical Family:Kaolins, Cellulose & Cellulosics
End Uses:Solventless & High Solids Coating, Top Coat, Waterborne Sealant, Waterborne Adhesive, Solventborne Adhesive, Waterborne Ink, Solvent Free (100% Solids) Adhesive, Plastisol Coating, Offset Ink, Waterborne Coating, Solventborne Coating, Screen Printing Ink, Solventborne Ink
Particle Size:2.3 - 2.3 microns
Oil Absorption:42.0 - 42.0 g/100 g

KaMin® 80B is an economical, general purpose water-washed kaolin, with intermediate brightness. It is suitable for use in water-borne, solvent-borne and solvent-free paint, ink, and adhesive applications.

KaMin® 90 banner

Functions:Filler
Chemical Family:Kaolins, Cellulose & Cellulosics
End Uses:Top Coat, Waterborne Adhesive, Solventborne Adhesive, Waterborne Ink, Waterborne Coating, Gelcoat, Gravure Ink, Solventborne Coating, Screen Printing Ink, Solventborne Ink
Particle Size:1.5 - 1.5 microns
Oil Absorption:43.0 - 43.0 g/100 g

KaMin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin® 90 is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important.

Lithosperse® 7005CS banner

Lithosperse® 7005CS

Chemical Family:Kaolins
Functions:Rheology Modifier
Physical Form:Powder, Solid
Synonyms:Porcelain clay, White clay

Lithosperse® 7005 CS is a high performance treated kaolin designed to improve rheology with outstanding dispersibility and resistance to clay bleed in lithographic cold set inks. Lithosperse® 7005 CS has been designed for mix, pump and filter production systems to minimize filter plugging.

KaMin® 611 banner

Functions:Filler
Chemical Family:Cellulose & Cellulosics, Kaolins
End Uses:Waterborne Coating, Plastisol Coating
Particle Size:1.3 - 1.3 microns
Oil Absorption:40.0 - 40.0 g/100 g

Naturally Delaminated clay for use in water-based paints and coatings.