Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
- Available in over 200 custom colors, eight textures and thicknesses from 0.71mm (0.028) and up
- Easy to clean graffiti/spray paint, lipstick, pen, grease and grime with cleaners such as Soft Scrub®, Fantastic®, and citrus-based cleaners such as Cirti Kleen HD® (avoid ammoniated cleaners)
- Resistant to a wide range of concentrated chemicals and solvents, withstands frequent cleaning without staining or fading
- Forms to deep draws with low forces when heated to the upper range of 163 - 200°C (325 - 392°F) and an unusually high resistance to hot tearing
- Can be formed on all standard presses and cut on all standard die-cutting machines
Applications & Uses
- Markets
- Applications
- Applications
- Mass Transit Vehicle Interior Components
Properties
- Mechanical Properties
- Physical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Bearing Strength | max. 199 | MPa | ASTM D-953 |
| Bearing Strength (4% Defelection) | 33.5 | MPa | ASTM D-953 |
| Compressive Modulus | 2579 | MPa | ASTM D-695 |
| Compressive Strength (Yield) | 55.5 | MPa | ASTM D-695 |
| Flexural Modulus | 2413 | MPa | ASTM D-790 |
| Flexural Strength | 63.4 | MPa | ASTM D-790 |
| Gardner Drop Dart Impact | min. 72.3 | J | ASTM D-5420 |
| Notched Izod Impact | 187 | J/m | ASTM D-256 |
| Shear Strength | 49 | MPa | ASTM D-732 |
| Tensile Modulus | 2592 | MPa | ASTM D-638 |
| Tensile Strength | 41.4 | MPa | ASTM D-638 |
| Value | Units | Test Method / Conditions | |
| Density | 1.3 | g/cm³ | ASTM D792 |
| Rockwell Hardness (R-Scale) | 105 | — | ASTM D785 |
| Specific Gravity | 1.4 | — | ASTM D792 |
| Water Absorption (24 hr.) | 0.09 | % | ASTM D570 |
| Value | Units | Test Method / Conditions | |
| Rockwell Hardness | 105 | Scale R | ASTM D785 |
| Value | Units | Test Method / Conditions | |
| Coefficient of Thermal Expansion | 76.4 | um/m/°C | ASTM E-831 |
| Heat Deflection Temperature (264 psi (1.8 MPa) Annealed) | 77.8 | °C | ASTM D648 |
| Value | Units | Test Method / Conditions | |
| Dielectric Strength (Oil) | 19.5 | kV/mm | ASTM D149 |
| Value | Units | Test Method / Conditions | |
| Fame Spread Index (No Burning Drip) | max. 35 | — | ASTM E162 |
| Flammability (Smoke Generation, 1.5min) | max. 100 | — | — |
| Flammability (Smoke Generation, 4min) | max. 100 | — | — |
| Flammability Fire Behavior Classification | S4, ST2, SR2 | — | DIN 5510-2 |
| Flammability Independent Laberatory Testing | V - 0 | — | UL Standard 94 |
Regulatory & Compliance
- Quality Standards