Products

Alcohol soluble non film forming polyamide resin 100% Solids.

Ultrapoly™ 210 A is a high performance blend of tough, low COF polyethylene dispersed in a harddrying binder. Ultrapoly 210 A is recommended where abrasion, mar resistance, and slip are required. Ultrapoly 210 A is 100% non-volatile and fast-setting. It protects the film in the earliest stages of the printing process while developing exceptional toughness over time.

Ultrafine™ 1WLS A is a premium polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1WLS A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Ultrafine 1WLS A is characterized by a slightly broader particle size distribution. Recommended usage level is 1 to 4%.

Alpha-Rez™ 9200 E is a structured visco-elastic Hydrocarbon- / Rosin-based Hybrid Resin. Alpha-Rez™ 9200 E exhibits a high viscosity and high solubility. Alpha-Rez™ 9200 E based inks give very high gloss and fast setting. Alpha-Rez™ 9200 E exhibits a high stability of rheology under high shear conditions. Alpha-Rez™ 9200 E has a high CTI (Critical Toning Index), which is very important for Waterless offset inks

Ultrapoly™ 213 A is a fine particle size blend polyethylene/PTFE dispersed in a 100% non-volatile, hard-drying binder. Ultrapoly 213 A is recommended for both sheetfed and heatset inks where gloss retention, lubricity, abrasion and mar resistance are required. Ultrapoly 213 A is coatable and may be used for laser work. For optimum heat resistance, we recommend using 3 parts Ultrapoly 213 A to 1 part Fluoron™ 960 A (a 50% PTFE concentrate). Recommended usage level is 3 to 5%.

Ultrapoly™ 215 A is a softer-bodied, pumpable version of Ultrapoly 211 A. Ultrapoly 215 A is a high performance blend of tough, low COF polyethylene/PTFE and is recommended where a high degree of lubricity, abrasion and mar resistance, heat resistance, and pumpability are required. Ultrapoly 215 A is a 100% non-volatile and fast-setting, protecting the film in the earliest stages of the printing process, while developing exceptional toughness over time. Ultrapoly 215 A is coatable and may be used for laser work. For optimum heat resistance, we recommend using 3 parts Ultrapoly 215 A to 1 part Fluoron™ 735 A (a 50% PTFE concentrate). Recommended use level is 3 to 5%.

Ultrapoly™ 211 A is a PTFE modified version of Ultrapoly 210 A. Ultrapoly 211 A is a high performance blend of tough, low COF polyethylene/PTFE dispersed in a hard drying binder. Ultrapoly 211 A is recommended where a high degree of slip, heat resistance, and abrasion resistance are required. Ultrapoly 211 A is 100% non-volatile and fast-setting. It protects the film in the earliest stages of the printing process while developing exceptional toughness over time. Ultrapoly 211 A is coatable and may be used for laser work. For optimum heat resistance, we recommend using 3 parts Ultrapoly 211 A to 1 part Fluoron™ 735 A (a 50% PTFE concentrate). Recommended usage level is 3 to 5%.

Setaprint™ 150 A is a Lawter™ phenolic modified rosin ester. Setaprint 150 A is a unique ultra-high molecular weight resin, possessing high viscosity while maintaining a workable dilution range. Setaprint 150 A provides greater compatibility with drying oils and alkyds then ever achieved before at this viscosity. These combined properties allow Setaprint 150A to help improve gloss, transfer, dot sharpness, gel structure and press stability. This resin provides an inner structure in solution allowing for reduction in gelling agents and improved stability of gelled systems

Ultrafine™ 1W A is a polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1W A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Recommended usage level is 1 to 4%.

Ultrapoly™ 2300 A is a softer bodied, pumpable version of Ultrapoly 210 A. Ultrapoly 2300 A is a high performance blend of tough, low COF polyethylene dispersed in a hard-drying binder. Ultrapoly 2300 A is recommended where abrasion and mar resistance, slip, and pumpability are required. Ultrapoly 2300 A is a 100% non-volatile and fast-setting, protecting the film in the earliest stages of the printing process, while developing exceptional toughness over time. Ultrapoly 2300 A is coatable and may also be used for laser work, when combined with PTFE. For optimum heat resistance, we recommend using 3 parts Ultrapoly 2300 A to 1 part Fluoron™ 735 A (a 50% PTFE concentrate). Recommended usage level is 4 to 6%.