Products

Due to increasing demands in fire protection regulations it has become necessary to modify the flame retardancy behavior of plastics. Flame retardants action is to retard the flammability of plastics in order to minimize their ignition properties and burning behavior such as flame propagation, smoke, and heat. We can offer Halogenated and Non-halogenated Flame Retardant Additive, Masterbatch and Compound based on the end application.

According to a study, about 80% of infection diseases start from surface contact. Bacteria and fungi are everywhere in our daily life, the microbe can quickly reproduce with suitable conditions. It may cause contamination, odors and infectious diseases. Anti-Microbial, Anti-Fungal additives will be integrated into the polymer during the manufacturing process to inhibit the growth and provide protection from microbes.

Sunlight together with heat and oxygen induces reactions of degradation in plastics, causing detrimental effects on their mechanical, optical and physical properties. The result is breakage, chalking and discoloration. Outdoor weathering results in degradation by exposure to the ultraviolet part of sunlight which reaches the earth’s surface, at wavelengths between 300 and 400 nanometres. Environmental factors like temperature, humidity, oxygen, polluting gasses also play an important role.

Sunlight together with heat and oxygen induces reactions of degradation in plastics, causing detrimental effects on their mechanical, optical and physical properties. The result is breakage, chalking and discoloration. Outdoor weathering results in degradation by exposure to the ultraviolet part of sunlight which reaches the earth’s surface, at wavelengths between 300 and 400 nanometres. Environmental factors like temperature, humidity, oxygen, polluting gasses also play an important role.

Low smoke, zero halogen (LSZH) or Halogen-free, flame retardant (HFFR) compound is the main material to produce safety cable. Halogen free solutions that fulfill both mechanicals, flame and processibility are very challenging. High filled materials are required for high flame resistance. Some conditions during long terms applications requires environmental stress cracking resistance. Our solutions are tested on such severe conditions of moisture, temperature and mechanical stress on low and medium volage.

Most polymers go through oxidative degradation processes during manufacturing and subsequent compounding and processing. Oxidation and heat aging are major causes of degradation of plastics. Exposure to heat and oxygen causes a chain reaction involving the formation of free-radicals, which inevitably leads to cleavage of the main chains in the polymer and degradation of the plastic. This is manifested in many difference ways including loss of shine and transparency, yellowing, surface cracking and odors. Oxidation can also result in loss of mechanical properties such as impact resistance, elongation and tensile strength.

In the extrusion of thermoplastic polymers, processing problems like melt-fracture, sharkskin, die build-up, reduced output, and poor optical properties are often noticed. With the addition of Processing Aid masterbatches these processing problems can be reduced or eliminated. Processing aids are materials that are added to improve the processability of polymeric compounds. Improved processability lowers the cost and improves the quality of the polymer. Most used processing aids are styrenes, acrylics, calcium carbonates, lubricants, silicone oils etc.