Products

Rovene 4310 is a medium soft carboxylated styrene-butadiene emulsion designed for formulation of general purpose labels and construction adhesives. It is used in the formulation of general purpose labels and construction adhesives which provide excellent adhesion to a variety of substrates. Rovene 4310 has compatibility with a wide variety of commercial tackifier resins and has excellent filler tolerance.

Rovene 6105 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives. It can be formulated into a pressure sensitive adhesives that requires a minimum amount of tackifier. Rovene 6105 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers.

Rovene 6005 is a very soft acrylic, high molecular weight latex emulsion specifically designed for formulation of pressure sensitive permanent label adhesives. Its high molecular weight allows the formulation of permanent label adhesives which are high in peel and tack, yet require a minimum amount of tackifier. Rovene 6005 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers. Rovene 6005’s high molecular weight also provides improved wet crock of inks printed on nonwoven and textile substrates in the Printing and Packaging market.

Rovene 4848 is a very soft non-carboxylated styrene-butadiene emulsion specifically designed for the use in a two part spray adhesive for open or closed cell foams and other contact and cold seal applications. Rovene 4848 has fast break characteristics that may allow it to be used in specially formulated one part spray adhesives. Rovene 4848 has found applications in two part foam-to-foam, one and two part fast breaking spray up adhesives, and special contact or cold seal applications in combination with polychloroprene and natural latex. When working with Rovene 4848 it is important to remember that it may be tackified, thickened and blended with other non-carboxylated and carboxylated emulsions. This flexibility allows for the formulating of a wide variety of adhesives with custom performance properties.

Rovene 9410 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives. It is used in the formulation of pressure sensitive adhesives with a wide variety of tackifiers. Rovene 9410 has a unique balance of molecular weight and styrene content, which makes it ideal for blending with natural rubber and formulation of low temperature adhesives.

Rovene 4423 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label adhesives and flooring adhesives. This polymer emulsion allows for the formulation of permanent label adhesives which are high in peel and tack, yet require a minimum amount of tackifier. However, it provides good tack on its own, thus minimizing the amount of tackifer required. Rovene 4423 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers. Rovene 4423 can also be blended with natural latex for high shear tape adhesives and for use in special contact adhesive applications.

Rovene 5550 is a self crosslinking carboxylated styrene-butadiene emulsion that as a soft, resilient hand with outstanding strength properties. This binder is specially suited for various textile and coating applications. Rovene 5550 imparts excellent water and solvent resistance, excellent tensile strength and good adhesion to a wide variety of fibers. In contrast to conventional styrene-butadiene emulsions, Rovene 5550 has a much faster cure rate. In addition, it can be easily sprayed, is mechanically stable (at pH 8.5 and greater), and is low foaming. Rovene 5550 is used as a primary binder for nonwoven and textile applications in areas such as bonding wet wipes, polishing pads, filters, and facial scrub pads.

Rovene 4813 is a very soft non-carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives. Rovene 4813 is a high gel content, hot polymerized latex designed with excellent shear stability and high tolerance for fillers and pH shock. Its soft films yield adhesives with good tack and no adhesion build for use in removables. Rovene 4813 is easily tackified and gives high peel and shear strengths in adhesives and mastics. This product is also sprayable.

Rovene 9423 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive permanent adhesives. This polymer emulsion allows formulation of pressure sensitive adhesives which are high in peel and tack yet require a minimum mount of tackifier. Rovene 9423 can also be blended with natural latex for high shear tape adhesives. This emulsion was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers.

Rovene 8305 is a high gel content, non-carboxylated styrene-butadiene emulsion recommended for flooring adhesives. These adhesives can be formulated to require exceptional uncured shear strength, pH tolerance and water resistance. Rovene 8305 can be greatly extened with oils and fillers in high solids formulations. Compatibility with commerical tackifier resins is excellent, as is filler tolerance. Dry films offer excellent water resistance, adhesion and high shear strength.

Rovene 6001 is a very soft, all acrylic emulsion polymer specifically designed for formulation of construction adhesives. It can be used neat or blended with a wide variety of polymer emulsions, dispersed tackifiers, and fillers to yield performance characteristics that meet specific requirements. Rovene 6001 has an excellent balance of peel, tack and shear, allowing the formulation of permanent pressure sensitive adhesives.

Rovene 5044 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label and construction adhesives. It is used in the formulation of permanent label and construction adhesives which are high in peel and tack, and thus require a minimum amount of tackifier. Rovene 5044 was designed to give excellent performance and compatibility with a wide variety of tackifiers.