Products

Mavcoat® CRW releases hardened concrete from all forms and formliners that yields clean, easy stripping without bugholes and stains. CRW is a concentrated product used in applications that require a stronger release agent in hard to demold situations. CRW meets California, OTC, and all other Federal VOC regulations. Mavcoat CRW will not separate, so there is no need to mix before use.

Mavcoat® 902M is the water-based version of Mavcoat® T-100. T-100 is solvent-based that uses non-silicone polymers to allow finished parts to be painted, printed, plated, or post decorated in any way.

Mavcoat® HR-W27 is water-based chemistry that releases all flexible polyurethane foam systems from molds made of steel, aluminum, epoxy, fiberglass, or urethane. HR-W27 is ideal for high resiliency seating foam or visco-elastic foam used in pillow or bedding applications.

Mavcoat® EP-111 is considered the workhorse in the industry. It is a semi-permanent, water-based, non-silicone coating that yields a matte finish with excellent cosmetics. The surface is free of porosity and pinholes. There is little to no transfer making for superior adhesion of paint, print, or decals. It is good for high volume production where release is applied to hot molds and yields multiple releases with a single application.

Mavcoat® 1000 coats and impregnates the nylon tape that is used to wrap mandrel-built rubber hoses. It prevents the tape from sticking to the rubber hose, making the re-usable nylon tape easy to remove. Tape life is prolonged, saving the operation money. Mavcoat® 1000 is a concentrated polymer solution that is diluted with water. It is also non-silicone so there is no contamination of the finished hose.

Mavcoat® TM-10 is a water-based semi-permanent release that is an alternative for Teflon coating your molds. The Mavcoat® TM-10 will produce a semi-gloss finish on your parts without any white haze. This will eliminate the need to flame treat most parts. The TM-10 will release all densities of linear and crosslink polyethylene resins as well as polycarbonate.

Mavcoat® PU-54 is a non-silicone water-based release coating specially formulated for release of rigid and flexible polyurethane foams and cast elastomers.

Mavcoat® MD-W54 is a semi-permanent water-based release agent for the most difficult compounds including AFLAS and other fluoroelastomers in complex molds.

Mavcoat® EM is a ready-to-use, water-based system for high-volume production where application to hot molds is made frequently because a semi-permanent coating is not wanted or needed. Mavcoat® EM produces a glossy surface finish on all thermoset composite systems.

Mavcoat® GSMR is a concentrated, water-based coating used for mandrel-built parts that ease extraction of parts from mandrel because high-slip lubricity polymers reduce friction at the mold surface. Mavcoat® GSMR is concentrated so it can be shipped overseas and diluted with water at the manufacturing site. It yields superior release of all thermoset composite systems.

Mavcoat® STM is used to prevent uncured rubber from sticking to itself when rubber is stacked or coiled. Mavcoat® STM replaces messy talc and stearate-based dispersion. It is non-silicone, water-based, and clear. It does not contaminate the rubber or cause defects during molding operations.

Mavcoat® MBH is a specialized technology for making Mandrel-Built Hose on straight mandrels. It can be used as-is or diluted with water. Mavcoat® MBH will release all organic rubber elastomers. The technology seals, releases and lubricates the mandrel, which is then tightly wrapped with rubber and cured. The coating produces a very low coefficient of friction, so extraction is easy, and the finished hose slides from the mandrel with little effort.

Mavcoat® CFR-5 is the water-based version of Mavcoat® DHSR. It is a water-based coating that will prevent any rigid polyurethane foam from sticking to your parts' surface. During the foam filling process excess rigid foam will expand out vent holes attaching itself to the exterior of the part. Apply Mavcoat® CFR-5 anywhere rigid foam may come into contact to prevent the foam from sticking. Cured rigid foam can be easily removed without damaging or staining your part. The Mavcoat® CFR-5 will not discolor your parts' surface and it can be easily removed with soap and water.

Mavcoat® Roto is a semi-permanent release that has the unique ability to release all densities of linear and crosslink polyethylene resins. We guarantee no pock-marking (coining) on crosslink parts when using Roto. And most importantly, Mavcoat® Roto maintains product dimensions without warping the part no matter how much is applied.

Mavcoat® BR is a water-based emulsion used to release rubber mats and all other parts made from recycled crumb rubber using urethane binder systems. Emulsion concentrate is usually diluted with water at varying levels to achieve the release needed for a given binder system. It prevents binder from building up on mold surface and keeps tooling clean to yield longer production runs between cleaning cycles.

Mavcoat® FR-2 will make it easier to remove any build-up on your flanges. Only a thin film of the Mavcoat® FR-2 is needed to prevent material from sticking in the flanges. Keeping the flanges clean and free of build-up will eliminate air bubbles from forming along the parting line.

Mavcoat® MMR is the ready-to-use version of Mavcoat® GSMR so it does not require dilution. Mavcoat® MMR is a water-based coating used in high-volume production environments. Since it contains high-slip lubricity polymers, MMR yields superior release for parts built on mandrels or in compression and vacuum bagging operations. It is semi-permanent and will yield multiple parts with a single application or can be applied before every cycle in difficult demolding situations. It produces a glossy surface finish and releases all thermosets.

Mavcoat® EP-524 is a water-based, non-silicone, semi-permanent mold release coating that yields excellent cosmetic finish. It utilizes our proprietary ceramic-based technology which offers high thermal stability and releases polyester, epoxy, vinyl ester and other thermoset resins.

Mavcoat® CDNA is a specialized release coating for molded parts that must be free of any residue because the finished parts will be painted or bonded to after molding.

Mavcoat® RT-44 anti-static coating can be added to your dry powder or applied directly to the mold surface. This will improve granite appearance and eliminate color swirling that can occur with some dry blended materials.

Mavcoat® MD-4 is a water-based, semi-permanent release coating for all organic rubber elastomers. It contains a novel binder system that adheres strongly to the mold surface and a unique lubricity additive that allows for good rubber flow throughout the mold. Mavcoat® MD-4 is a non-silicone ceramic-based technology and can be used to make food grade products because it meets 21 CFR 181.28.

Mavcoat® RT-3 is a highly semi-permanent release able to withstand temperatures up to 1,300°F. This allows it to last much longer between reapplications and will allow you to lower the amount of mold release you use. Mavcoat® RT-3 is able to release all densities of linear and crosslink polyethylene resins.

Mavcoat® RH is a specialized product used to make rubber hose from rubber mandrels. It seals and releases the rubber mandrel upon which, rubber hose is extruded, wrapped, and cured in very long lengths of 1,000 to 2,000 feet. Mavcoat® RH cures on the mandrel and provides extreme lubricity so the entire length of hose is extracted in one piece. The diameter of the rubber mandrel can be any size, but typically ranges from 1/8” to 4”. The finished hose is used in many applications such as, hydraulic, industrial, and oil field.

Mavcoat® SR is a specialized semi-permanent release agent for the release of silicone, fluorosilicone, and organic rubber elastomers. Its unique chemistry cleans mold and maintains a lustrous surface.

Mavcoat® CRW-2 is a water-based, V.O.C. free emulsion formulated for the release of concrete, GFRC, GRC, and composite reinforced concrete from molds made of steel, polyurethane, RTV silicone, rubber, epoxy, and fiberglass. Mavcoat® CRW-2 will not separate, so no mixing before use is needed.

Mavcoat® 265-T is a water-based release agent for frequent application during the molding of general rubber goods. Use Mavcoat® 265-T in applications that can use a lighter release where molds are sprayed more often.

Mavcoat® TZ-4 technology is a water-based coating that releases all organic rubber. It is semi-permanent and may only need to be applied once per shift in some applications. Since Mavcoat® TZ-4 releases all organic rubber compounds, it will be the only release needed on the production floor.

Mavcoat® BR-1 is a ready-to-use, water-based coating that requires no dilution. It releases pMDI and MDI binder systems. It adheres strongly to the mold surface and does not transfer. pMDI is an unconventional adhesive, which is sometimes more difficult to release than traditional binders. It has also been known to build up more quickly on mold surfaces. BR-1 yields an anti-stick coating that mitigates this build-up.

Mavcoat® BR-2 is a water-based, “super-release” required when unconventional, stronger binder systems are used. It cures on the mold surface to provide a tenacious coating that withstands heavy abrasion during the molding cycle.

Mavcoat® MD-W6 utilizes a water-based ceramic technology that releases all organic and silicone rubber. It is a thin film non-silicone, semi-permanent system which will minimize build up. Mavcoat® MD-W6 will consolidate all mold releases into one system.

Mavcoat® Roto-4 is similar to Mavcoat® Roto, but contains lubricity additives for hard to remove parts due to undercuts, scuppers, bolts, pins, or draft.

Mavcoat® EF-ND is the water-based version of Mavcoat® HVP-I. HVP-I is engineered for high-volume production environments that don’t need a strong release but still require a fast evaporating mold release with excellent surface wetting properties.

Mavcoat® HR-W32 is a water-based chemistry that releases all flexible polyurethane foam systems from molds made of steel, aluminum, epoxy, fiberglass, or urethane. HR-W32 is ideal for high resiliency seating foam or visco-elastic foam used in pillow or bedding applications.

Mavcoat® CDN is a non-silicone, water-based emulsion that is used in applications where silicone contamination is not allowed such as in aerospace parts and medical devices. Mavcoat® CDN releases foams and elastomers and works best on heated metal molds where water can rapidly evaporate.

Mavcoat® SRLP-2 is a specialized technology for making mandrel-built silicone rubber parts. It is commonly used for making aircraft door seals and other silicone rubber laid up on internal mandrels. The coating releases compression parts and lubricates the mandrel for easy extraction. Tightly wrapped long sections of cured silicone rubber slide from the mandrel with little effort.