Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Odor
- Odorless
- Insoluble in
- Water
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Tensile Strength ⁶ | 115.0 | MPa | ISO 527-1/-2 ⁷ |
Tensile Strain (elongation, at yield) ⁶ | 4.5 | % | ISO 527-1/-2 ⁷ |
Tensile Strain (elongation, at break) ⁶ | 14.0 | % | ISO 527-1/-2 ⁷ |
Tensile Modulus of Elasticity ⁶ | 4600.0 | MPa | ISO 527-1/-2 ⁹ |
Shear Strength ⁶ | 55.0 | psi | ASTM D732 |
Compressive Stress (at 1% nominal strain) ⁶ | 40 / 79 / 143 | MPa | ISO 604 ¹⁰ |
Charpy Impact Strength - Unnotched ⁶ | 400.0 | kJ/m² | ISO 179-1/1eU |
Charpy Impact Strength - Notched ⁶ | 3.5 | kJ/m² | ISO 179-1/1eA |
Izod Impact Notched ⁶ | 0.6 | ft.lb./in | ASTM D256 |
Flexural Strength ⁶ | 25000.0 | psi | ASTM D790 (13) |
Flexural Modulus of Elasticity ⁶ | 600.0 | ksi | ASTM D790 |
Rockwell M Hardness ⁶ ¹⁴ | 105.0 | — | ISO 2039-2 |
Rockwell R Hardness ⁶ ¹⁴ | 126.0 | — | ASTM 2240 |
Value | Units | Test Method / Conditions | |
Thermal Decomposition | min. 400 | °C | — |
Self Ignition Temperature | 595.0 | °C | ASTM D 1929 |
Density | 1.39 | g/cm³ | ISO 1183-1 |
Specific Gravity | 1.31 | — | ASTM D792 |
Water Absorption (after 24h immersion in water of 23 °C) | 0.05 | % | ASTM D570 ¹⁷ |
Water Absorption (at saturation in water of 23 °C) | 0.45 | % | ASTM D570 ¹⁷ |
Wear Rate | 28.0 | μm/km | ISO 7148-2 ¹⁸ |
Dynamic Coefficient of Friction (-) | 0.3 - 0.5 | — | ISO 7148-2 ¹⁸ |
Limiting PV (at 100 FPM) | 8500.0 | ft.lbs/in².min | QTM 55007 ²¹ |
Limiting PV (at 0.1 / 1 m/s cylindrical sleeve bearings) | 0.33 / 0.21 | MPa.m/s | — |
Value | Units | Test Method / Conditions | |
Melting Temperature (DSC, at 10°C) ¹ | 340.0 | °C | ISO 11357-1/-3 |
Thermal Conductivity (at 23°C) ¹ | 0.25 | W/(K.m) | — |
Coefficient of Linear Thermal Expansion (at -40 to 150 °C) ¹ | 1.74 | μin./in./°F | ASTM E-831 (TMA) |
Heat Deflection Temperature (method A, 1.8 MPa) ¹ | 165.0 | °C | ISO 75-1/-2 |
Continuous Allowable Service Temperature in Air (for 20 hrs) ¹ ³ | 250.0 | °C | — |
Service Temperature ¹ ⁴ | -50.0 | °C | — |
Value | Units | Test Method / Conditions | |
Volume Resistivity | 1 x 10¹³ | Ohm.cm | IEC 62631-3-1 |
Surface Resistivity | 1 x 10¹² | Ohm/sq. | ANSI/ESD STM 11.11 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Material Selection
Biocompatibility Pre-assessment Table - Medical
1. Cytotoxicity
Ref.: ISO 10993-5 and USP <87> Biological
Reactivity Tests, In Vitro Elution Test2. Sensitization
Ref. ISO 10993-10, Magnusson & Kligman
Maximization Method3. Intracutaneous Reactivity
Ref.: ISO 10993-10 and USP <88> Biological
Reactivity Tests, In Vivo – Intracutaneous Test4. Acute Systemic Toxicity
Ref.: ISO 10993-11 and USP <88> Biological
Reactivity Tests, In Vivo – Systemic Injection Test5. Implantation Test
Ref.: USP <88> Biological Reactivity Tests,
In Vivo – Implantation Test (7 days)6. Human blood compatibility
Ref.: ISO 10993-4, Indirect Hemolysis
(in vitro)7. USP-Physicochemical Tests for Plastics
Ref.: USP<661> Containers,
Ultra Pure Water extract, 70°C/24hUSP Class VI
Conclusion from tests 3, 4 and 5Intended applications of which the duration of
contact with human body tissue is limited to.Ketron® LSG PEEK-CLASSIX™ White Shape tested (incl. raw materials) Shape tested (incl. raw materials) Shape tested (incl. raw materials) Shape tested (incl. raw materials) Shape tested (incl. raw materials) Shape tested (incl. raw materials) Shape tested (incl. raw materials) Shape tested (incl. raw materials) max. 30d Biocompatibility Pre-assessment Table - Bioprocessing
USP Class VI
Conclusion from tests 3, 4 and 5Animal Free Origin (AFO) or EMA/410/01
Rev.3 (Absence of BSE/TSE)Food Contact – FDA
Ref.: USA FDA 21 CFR 177 and 178Food Contact – EU
Ref.: Commission Regulation (EU)
No 10/2011Ketron® LSG PEEK-CLASSIX™ White Shape tested (incl. raw materials) Animal Free Origin (AFO) Not compliant Not compliant
Storage & Handling
- Storage and Handling Information
Handling (Machining) :
- During machining of the semi-finished products, evacuate swarf to prevent slipping or tripping hazard and observe the maximum allowable concentration of dust and
- formaldehyde levels on the workplace which apply in your country.
- Wear safety goggles during machining.
Storage:
- The products shall be stored indoors in a normal environment (air at 10 - 30°C / 30 - 70% RH) and kept away from any source of degradation such as sunlight, UV-lamps, chemicals (direct or indirect contact), ionizing radiation, flames, etc.
- Dimensional changes (camber, warpage, shrinkage …) of the products as well as slight color shifts of the external surfaces can occur with time.
- The latter does generally not pose a problem in case of semi-finished products since the surface-layer is mostly removed anyway upon machining them into finished parts.
Safety measures:
- Standard industrial safety recommendations shall be observed.
- Temperatures above the melting temperature shall be avoided.