Products

WIPAFLEX TV 10 BK is a black material with heat-age stabilization properties intended for use in various automotive applications. The material is a blend of polypropylene, polyethylene, and EPDM, with 10% talc added as a filler. Prior to processing via injection molding, the material must be pre-dried at temperatures between 60 and 100°C for 2-4 hours, depending on its moisture content, which should not exceed 0.10%. During injection molding, the material should be melted at temperatures ranging from 200 to 270°C, with a mold temperature between 20 and 60°C. All temperatures must be carefully monitored to ensure they fall within the specified ranges.

WIPAFLEX TV 10 BK UV is a black composite material suitable for various automotive market segments. It contains polypropylene-polyethylene-EPDM as the base polymer and 10% talc filler. To achieve optimal processing conditions, it must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to ensure a maximum moisture content of 0.10%. The recommended processing method is injection molding, with a melt temperature range of 200-270°C and a mold temperature range of 20-60°C.

WIPAFLEX TV 5 BK is a black composite material suitable for various automotive market segments. It contains polypropylene-polyethylene-EPDM as the base polymer and 5% talc filler. To achieve optimal processing conditions, it must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to ensure a maximum moisture content of 0.10%. The recommended processing method is injection molding, with a melt temperature range of 200-270°C and a mold temperature range of 20-60°C.