Knowde Enhanced TDS
Identification & Functionality
- Fillers Included
- Polymer Name
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Shore Hardness D (15s) | 58.0 | — | ISO 868 |
| Tensile Modulus | 1100.0 | MPa | ISO 527 |
| Tensile Strength | 20.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 65.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -30°C) | 50.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 20.0 | kJ/m² | ISO 179/1eA |
| Notched Impact Strength (Charpy, at -30°C) | 3.6 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 960.0 | kg/m³ | ISO 1183 |
| Global Warming Potential (GWP) | 0.83 | kg CO₂ eq. | ISO 14040, 14044 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 54.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 49.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point) | 164.0 | °C | ISO 11357-1/-3 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.1 | % | — |
| Value | Units | Test Method / Conditions | |
| Mould Temperature | 20 - 60 | °C | — |
| Melt Temperature | 200 - 270 | °C | — |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 11.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 230.0 | °C | — |
| MVR Load | 2.16 | kg | — |
| Molding Shrinkage (parallel) | 1.4 | % | ISO 294-4, 2577 |
| Molding Shrinkage (normal) | 1.4 | % | ISO 294-4, 2577 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 60-100°C in an air circulating dryer for 2-4h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.