Products

Silplus™ 60 HS is a heat cured elastomer with very good mechanical and processing properties. Silplus™ 60 HS when properly compounded and catalyzed can be considered for use in a wide variety of applications such as extrusion, molding and calendaring.Key Features and Benefits excellent mechanical properties, in particular, high tear strength compounding simplicity good dielectric properties enhanced heat resistance versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 60 HS heat cured silicone is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.

LIM™ 6041 liquid silicone rubber is a 2 component Radio - Opaque product formulated with Barium Sulfate. It is used in liquid injection molding of high performance elastomeric parts. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications in medical devices where molded parts can be detected under X-ray due it's radio opacity.Key Features and Benefits Barium Sulfate filled for excellent radio - opacity Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent tear strength and radio - opacity, it is suitable for applications in medical devices such as wound drain catheters, where molded parts can be detected under X-ray.

LIM™ 6050 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6050 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150C (302F) to 205C (400F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.

Silopren™ LSR 4670 is a two-component liquid silicone rubber for injection molding processes. The material performance is particularly characterized by high reactivity, low viscosity and high tear strength. The LSR 4670 enables particularly the production of parts for healthcare devices covering by USP Class VI such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanisates consisting of LSR 4670 are distinguished by the following properties: Low viscosity Fast cure High tear strength Sterilisable with ethylene oxide, steam and gamma radiation Long service life at dynamic stress Neutral odor and taste High recovery after puncture High temperature stability.

Silopren™ LSR 2620 is a two-component liquid silicone rubber for injection molding processes.Silopren™ LSR 2620 shows in comparison to Silopren™ LSR 2020 a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanisation temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanisate.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 2620 are distinguished by the following properties: high reactivity, lower viscosity, shorter cycle time excellent thermal stability high stability and flexibility at low temperatures good rubber-like properties, high tear resistance high stability to ozone and ultraviolet light outstanding resistance to aging, excellent dielectric behavior over a wide range of temperatures, not readily combustible, does not melt or drip easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 2620 is particularly suitable for the following elastomeric articles: stoppers, vibration dampers, shoe inserts s.o.

Tufel™ II 94406 are 40-70 durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.

Silopren™ LIM9071 ET liquid silicone rubber is a 2-component liquid injection molding material which offers primerless adhesion to a wide range of substrates including metals and many engineering plastics, making it an ideal material for insert molding applications. LIM®9071 ET TP 3915 liquid silicone rubber is designed to be used in a 1:1 mix ratio and cures rapidly at molding temperatures of 150°C - 190°C to a high tear strength, translucent silicone elastomer.Key Features and Benefits Primerless adhesion to many substrates Maximum adhesion immediately after de-molding High temperature stability Excellent stability and flexibility at low temperatures Outstanding aging behavior and weathering resistance Good mechanical properties Easy pigmentable due to translucent color Potential ApplicationsLIM®9071 ET TP 3915 is particularly suitable for the manufacturing of parts, where engineering plastics and elastomeric materials need to be combined in an over molding or co-molding process such as sealing elements, automotive connectors, membranes vibration dampening elements, etc.

Silopren™ LSR 4640 is a two-component liquid silicone rubber for injection molding processes. The material performance is particularly characterized by high reactivity, low viscosity and high tear strength. The LSR 4640 enables particularly the production of parts for healthcare devices covering by USP Class VI such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanisates consisting of LSR 4640 are distinguished by the following properties: Low viscosity Fast cure High tear strength Sterilisable with ethylene oxide, steam and gamma radiation Long service life at dynamic stress Neutral odor and taste High recovery after puncture High temperature stability compliance with US Pharmacopeia XXIII, Class VI (maximum contact time with human tissue 28 days.

Tufel™ II 94605 are 40-70 durometer low volatile fast-cure addition cured silicone elastomers for molding. They may be used by themselves or blended to intermediate durometers. Applications include fabricated molding that require short cycle time, deep section cures, and parts with low extractable requirements.Key Features and Benefits LV Bases Minimize Post Cure Times Totally Peroxide-Free Cure System Significant Reduction in Molding cycle Times Lower Molding Temperature Range (150-166C) (300-330F) Superior Mixed Shelf Life High Tear Strength Tight Surface Cure Non-blooming Translucency.