Products

Addisil™ 8101 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.Addisil™ 8101 is a gray thixotropic materialKey Features and Benefits One component product - no mixing required Room temperature storage Very fast cure at elevated temperature (in a range of 110°C to 230°C) Primerless adhesion to many types of substrates (e.g. PBT, PA, phenolic resins, copper, nickel, aluminum, stainless steal, brass, ceramic and glass) No formation of cure by-products; low linear shrinkage Non-corrosive to metals and sensitive substrates Excellent dielectric properties Outstanding performance over a wide temperature range Service temperature -50°C to 250°C.

LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Silopren™ LSR 7005 liquid silicone rubber is a two-component, high-transparency, low-hardness, low-viscosity, fast-cure speed and ultra clear liquid silicone rubber (LSR). Providing good optical clarity, Silopren™ LSR 7005 liquid silicone rubber combines typical LSR properties, such as high temperature stability and flowability, with excellent UV and blue light stability. As a result, optical parts produced using this material can exhibit excellent durability and maintain optical clarity, even if exposed to high temperatures or UV light. The very low hardness and low modulus help enable easy assembling and coupling of molded optical elements. Silopren™ LSR 7005 liquid silicone rubber is designed to be processed through LSR injection molding technology, which can help to produce high precision optical parts even in large quantities at a high efficiency.Key Features and Typical Benefits Optical Clarity Durability Design Freedom Potential Applications Optical interfaces Rain light sensors Camera systems Optical sensors Other transparent applications.

Tufel™ II 94405 are 40-70 durometer low volatile fast-cure addition cured silicone elastomers for molding. They may be used by themselves or blended to intermediate durometers. Applications include fabricated molding that require short cycle time, deep section cures, and parts with low extractable requirements.Key Features and Benefits LV Bases Minimize Post Cure Times Totally Peroxide-Free Cure System Significant Reduction in Molding cycle Times Lower Molding Temperature Range (150-166C) (300-330F) Superior Mixed Shelf Life High Tear Strength Tight Surface Cure Non-blooming Translucency.

Silopren™ LSR 3285/50 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It typically starts between a few hours and one day after vulcanization.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3285/50 liquid silicone rubber are typically distinguished by the following properties: self-lubricating properties transparent low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties, Silopren™ LSR 3285/50 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals grommets gaskets plug seals.

Silopren™ LSR 3596/35 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It typically starts between a few hours and one day after vulcanization. Silopren™ LSR 3596/35 shows an excellent compression set after vulcanization without post-curing.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3596/35 liquid silicone rubber are typically distinguished by the following properties: ultra-low compression set without post-cure self-lubricating properties low viscosity fast cure low modulus high thermal stability increased crack resistance outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties, Silopren™ LSR 3596/35 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals mat seals grommets gaskets plug seals.

Silopren™ LSR 3485/38 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It typically starts between a few hours and one day after vulcanization.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3485/35 liquid silicone rubber are typically distinguished by the following properties: self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties, Silopren™ LSR 3485/35 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals mat seals grommets gaskets plug seals.

Addisil™ 6300 silicone coating is a one-component heat curable silicone coating, which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.Addisil™ 6300 is a white, flowable material, which can be applied on a textile by knife over roll.Compliance with FDA regulationsKey Features and Benefits One component product - no mixing required Room temperature storage Fast cure at elevated temperature (in a range of 140 °C to 230 °C) Primerless adhesion to many types of substrates No formation of cure by-products Non-corrosive to metals Good performance over a wide temperature range.

Silopren™ LSR 3785/30 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It typically starts between a few hours and one day after vulcanization.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3785/30 liquid silicone rubber are typically distinguished by the following properties: self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of it's outstanding properties, Silopren™ LSR 3785/30 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals mat seals grommets gaskets plug seals.

Silopren™ LSR 3186/50 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It typically starts between a few hours and one day after vulcanization. Silopren™ LSR 3186/50 liquid silicone rubber shows a low compression set after vulcanization without post-curing.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3186/50 liquid silicone rubber are typically distinguished by the following properties: low compression set without post-cure self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 3186/50 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals grommets gaskets plug seals.

Addisil™ 6100 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.Addisil™ 6100 is a black, thixotropic paste, which can be applied to vertical or overhead surfaces.Key Features and Benefits One component product - no mixing required Room temperature storage Fast cure at elevated temperature (in a range of 140 °C to 230 °C) Primerless adhesion to many types of substrates (e.g. glass, enamel, aluminum, ceramic) No formation of cure by-products Non-corrosive to metals Good performance over a wide temperature range Service temperature -50 °C to 250 °C.

LIM™ 6010 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LIM6010 elastomer is clear, but easily pigmentable with Momentive masterbatch colors. The combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications as corn pads and heel inserts, where 'soft touch' sensory characteristics are important. LIM6010 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature.Key Features and Benefits Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Outstanding Thermal Cycling Performance Potential ApplicationsThe combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications, where 'soft touch' sensory characteristics are important. Corn Pads Heel Inserts.

LIM™ 6040-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6040-D2 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds The combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Silopren™ Matrix 70 and 80 two-component liquid silicone rubber for injection molding processes contain polymeric fibers, which help reinforce molded articles while maintaining LSR's excellent processing properties.Key Features and Typical BenefitsVulcanizates consisting of Silopren™ Matrix LSR are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Good rubber-like properties High modulus High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ Matrix LSR is an excellent candidate to consider for use in the following elastomeric articles: Membranes Pressure hoses Exhaust hangers Watchbands Belts.

Tufel™ II 94205 and 94305 Rubber Compounds are 20 and 30 durometer low volatile, fast-cure, addition cured silicone elastomers for molding. They may be used by themselves or blended to intermediate durometers. Applications include fabricated molding that require short cycle time, deep section cures, and parts with low extractable requirements.Key Features and Benefits LV Bases Minimize Post Cure Times Totally Peroxide-Free Cure System Significant Reduction in Molding Cycle Systems Lower Molding Temperature Range (150-166C) (300-330F) Superior Mixed Shelf Life Tight Surface Cure Non-blooming Translucency.

Silopren™ Electro 242-2 TP 3750 is a two-component liquid silicone rubber for injection molding processes. This silicone rubber is particularly developed for the manufacturing of housing and weather sheds for all kinds of insulatorsKey Features and BenefitsVulcanisates consisting of Silopren™ Electro 242-2 TP 3750 are distinguished by the following properties: outstanding aging behavior and weather resistance fast hydrophobicity transfer and hydrophobicity recovery rapid vulcanisation excellent dielectric behavior over a wide range of temperatures very good tracking and arc resistance very good flowability high stability and flexibility at low temperatures excellent stability to ozone and ultraviolet light not readily combustible, does not melt or drip easy pigmentable with LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ Electro 242-2 TP 3750 is particularly suitable for the following elastomeric articles: suspension and long rod insulators, post line and pin insulators, surge arresters, hollow core insulators, high voltage plugs, cable connectors, fittings and terminals s.o.

Silopren™ Electro 242-1 TP 3717 is a two-component liquid silicone rubber for injection molding processes. This silicone rubber is particularly developed for the manufacturing of housing and weather sheds for all kinds of insulators.Key Features and BenefitsVulcanisates consisting of Silopren™ Electro 242-1 TP 3717 are distinguished by the following properties: outstanding aging behavior and weather resistance fast hydrophobicity transfer and hydrophobicity recovery rapid vulcanisation excellent dielectric behavior over a wide range of temperatures very good tracking and arc resistance very good flowability high stability and flexibility at low temperatures excellent stability to ozone and ultraviolet light not readily combustible, does not melt or drip easy pigmentable with LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ Electro 242-1 TP 3717 is particularly suitable for the following elastomeric articles: suspension and long rod insulators, post line and pin insulators, surge arresters, hollow core insulators, high voltage plugs, cable connectors, fittings and terminals s.o.

Silopren™ LSR 3386/40 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It typically starts between a few hours and one day after vulcanization. Silopren™ LSR 3386/40 liquid silicone rubber shows a low compression set after vulcanization without post-curing.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3386/40 liquid silicone rubber are typically distinguished by the following properties: low compression set without post-cure self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties, Silopren™ LSR 3386/40 liquid silicone rubber is an excellent candidate to consider for use in wire harnessapplications for the following elastomeric articles: cable seals grommets gaskets plug seals.

Addisil™ 6101 Momentive Performance Material's Silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.Addisil™ 6101 silicone adhesive is a black, thixotropic paste, which can be applied to vertical or overhead surfaces.Key Features and Benefits One component product - no mixing required Room temperature storage Very fast cure at elevated temperature (in a range of 110°C to 230°C) Primerless adhesion to many types of substrates (e.g. aluminum, copper, stainless steel, glass, enamel, ceramic) No formation of cure by-products; low linear shrinkage Non-corrosive to metals and sensitive substrates Outstanding performance over a wide temperature range Service temperature -50°C to 250°C.

Silopren™ LSR 3596/30 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It typically starts between a few hours and one day after vulcanization. Silopren™ LSR 3596/30 shows an excellent compression set after vulcanization without post-curing.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3596/30 liquid silicone rubber are typically distinguished by the following properties: ultra-low compression set without post-cure self-lubricating properties low viscosity fast cure low modulus high thermal stability increased crack resistance outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties, Silopren™ LSR 3596/30 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals mat seals grommets gaskets plug seals.

Silopren™ LSR 3485/50 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It typically starts between a few hours and one day after vulcanization.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3485/50 liquid silicone rubber are typically distinguished by the following properties: self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties, Silopren™ LSR 3485/50 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals grommets gaskets plug seals.

Silopren™ LSR 3386/30 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It typically starts between a few hours and one day after vulcanization. Silopren™ LSR 3386/30 liquid silicone rubber shows a low compression set after vulcanization without post-curing.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3386/30 liquid silicone rubber are typically distinguished by the following properties: low compression set without post-cure self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 3386/30 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals mat seals grommets gaskets plug seals.

LIM™ 6040 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

LIM™ 6030 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM 6030 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.

Addisil™ 160 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 70 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacturing.

InvisiSil™ IVS4632 is a two-component, addition cure silicone rubber designed for optical device coating. This product cures with heat to an elastomer.Key Features and Benefits Low viscosity allows for excellent flowability Excellent transparency Convenient 1:1 mix ratio by weight Cures fast with heat and adheres to parts Potential Applications Coating and potting of optical device.

LIM™ 6071 is the next generation in 70-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6071 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications Sports goggles and masks Health care profiles Camera parts Metal roll coatings.

Silopren™ LSR 3786/20 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It starts typically between a few hours and one day after vulcanization. Silopren™ LSR 3786/20 liquid silicone rubber shows a low compression set after vulcanization without post-curing.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3786/20 liquid silicone rubber are typically distinguished by the following properties: low compression set without post-cure self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties, Silopren™ LSR 3786/20 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals mat seals grommets gaskets plug seals.

The Addisil™ 480 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Silopren™ LSR 3286/50 is a a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It typically starts between a few hours and one day after vulcanization. Silopren™ LSR 3286/50 liquid silicone rubber shows a low compression set after vulcanization without post-curing.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3286/50 liquid silicone rubber are typically distinguished by the following properties: low compression set without post-cure self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties, Silopren™ LSR 3286/50 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals grommets gaskets plug seals.

SilTRUST™ TSE3667 is a two-component condensation cure silicone rubber designed for electric potting. SilTRUST TSE3667 cures at room temperature to form an elastic flame retardant rubber and adheres to various types of materials such as metal, plastics, glass and ceramics without the use of primers.Key Features and Benefits Flame retardant : UL94V-0 recognized (File No.E56745) Low viscosity allows for excellent flowability Fast Cure Excellent deep section cure Excellent adhesive properties : primerless adhesion to many types of substrates No cure inhibition Potential Applications Potting of electric and communications parts Moisture proof sealing of meters Moisture proof coating of electric circuit boards.

Silopren™ LSR 3286/70 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It typically starts between a few hours and one day after vulcanization. Silopren™ LSR 3286/70 liquid silicone rubber shows a low compression set after vulcanization without post-curing.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3286/70 liquid silicone rubber are typically distinguished by the following properties: low compression set without post-cure self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 3286/70 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals grommets gaskets plug seals.

Tufel™ II Silicone Rubber Compounds 94206 and 93306 are 20 and 30 durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.

Silopren™ LSR 4600 FC liquid silicone rubber is a family of platinum catalyzed fast cure two-component liquid silicone rubber offered in a variety of different durometers. With faster cure at lower temperatures such as 100°C, it is an excellent candidate to consider for injection molding onto lower temperature substrates such as polycarbonate.Key Features and Benefits fast cure at low temperatures long pot life UV resistance ISO 10993/USP Class VI tested(a) low viscosity chemical resistance high tear strength Potential Applications respiratory/anesthesia masks wound drain bulbs surgical devices diagnostics imaging fluid and drug delivery thermoplastic overmolding.

Silopren™ LSR 2610 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 2610 shows in comparison to Silopren™ LSR 2010 a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanisation temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanisate.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 2610 are distinguished by the following properties: high reactivity, lower viscosity, shorter cycle time excellent thermal stability high stability and flexibility at low temperatures good rubber-like properties, high tear resistance high stability to ozone and ultraviolet light outstanding resistance to aging, excellent dielectric behavior over a wide range of temperatures, not readily combustible, does not melt or drip easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 2610 is particularly suitable for the following elastomeric articles: stoppers, vibration dampers, shoe inserts s.o.

InvisiSil™ IVS4622 is a two-component, addition cure silicone rubber designed for optical device coating. This product cures with heat to an elastomer.Key Features and Benefits Low viscosity allows for excellent flowability Excellent transparency Cures fast with heat and adheres to parts Convenient 1:1 mix ratio by weight High Purity Shore A 60 Potential Applications Optical device coating.