Products

Plasticizer SC DLC-A is a diester of triethylene glycol, silicon-dioxide blend plasticizer, and softener for NR, SR's. Gives low temperature flexibility; improves processing.

Natrochem TAC DLC-A is a triallyl cyanurate, silicon-dioxide blend accelerator for EPM and co-agent for peroxide-cured EP polymers. It reduces cure time, eliminates odor caused by sulfur co-agent, improves heat aging and compression set resistance.

Natrochem TBEP DLC-A is blend of tributoxyethyl phosphate and silicon-dioxide. Provides very low temperature flexibility to plastics and acrylonitrile elastomers. Used as a plasticizer and a flame retardant in adhesives. It may retard cure with large loadings. Incorporates rapidly; aids filler dispersion; and reduces pigment requirements in colored stocks.

Sunpar 2280 DLC-A is a paraffinic process oil silicon dioxide blend plasticizer for NR, IR, EPDM, and EPR. Excellent incorporation and easy handling.

Trilene 65 DLC-A is a free-flowing powder made by combining Trilene liquid polymer and silicon dioxide. The blend is nominally 68% EPDM polymer and 32% silica. It is available as a dry, free-flowing powder that is easy to measure, store and transfer. DLC incorporates quickly and thoroughly into various elastomer systems, and gives quality and processing advantages when compared to neat polymer. Trilene 65 DLC-A is effective in EPDM, BR, NR, SBR and other elastomers.

Indopol H300 DLC-A is a polybutene, silicon-dioxide blend plasticizer and tackifier for NR, IIR, SBR, EPDM, polyisobutylene and thermoplastic elastomers. It aids compounding, molding, and pressure sensitive and hot-melt adhesives.

Petrolatum T DLC-A is a blend of petrolatum and silica. It functions as a plasticizer and lubricant for NR, SBR, IR, IIR, and polyisobutylenes. Petrolatum T DLC-A incorporates rapidly and aids in filler dispersion.

Natro-Cel 97-A is an aromatic hydrocarbon, silicon-dioxide blend plasticizer/processing aid for NR, SBR, CR, IIR, NBR, BR, EPM, and EPDM. It aids filler dispersion, and gives rapid incorporation. Large loadings may retard cure slightly. Small Mooney viscosity reduction.

Natrochem DBP DLC-A is a dibutyl phthalate, silicon-dioxide blend polyisobutylene plasticizer for NR, SBR, CR, NBR, IR and IIR. It gives rapid incorporation, aids dispersion of fillers, and reduces pigment requirements in colored stocks.

Natrochem CI 50 DLC-A is a coumarone-indene resin-silicon dioxide blend widely used in rubber, adhesive, paint, coating and allied industries.

Natro-Cel AL is an ammonium salt of alkyl phosphate, silicon-dioxide blend used as a mold lubricant and to inhibit corrosion. It removes tack from the surface of freshly mixed stock.

Petrolatum DLC-A is a blend of USP Petrolatum and silica. It functions as a plasticizer and lubricant for NR, SBR, IR, IIR, and polyisobutylenes. Petrolatum DLC-A incorporates rapidly and aids in filler dispersion.

Wintergreen 1200-30 is a blend of methyl salicylate and kaolin clay, in the form of a free-flowing powder. It is used as a reodorant in elastomeric blends.

Natro-Cel BCF-A is a Di(butoxy-ethoxy-ethyl) formal, silicon-dioxide blend, low-temperature plasticizer for NR, SBR, NBR, CR, and polysulfides. It gives rapid incorporation and aids filler dispersion. Large loadings may retard cure slightly.

Natro-Cel R-A is a blend of sodium sulfonate and selected process oils on silicon dioxide. Used as an effective dry-form plasticizer and processing aid for NR, SBR, IR, and IIR. Suggested for open-roll mill mixing and used in emulsification, corrosion and wetting applications.

Tar-Cel 30-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar and gives easier, faster, more accurate weighing.

Calsol 8240 DLC-A is a dispersion of naphthenic process oil on silicon dioxide. It is compatible with synthetic elastomers and their additives. Calsol 8240 DLC-A exhibits a balance of properties that make it the preferred choice for non-rubber applications as well. For example; resin extending, PVC, textiles, caulking compounds and other applications.

Natro-Cel 1312-A is a nitrile rubber, silicon-dioxide blend plasticizer for nitrile rubber compounds requiring improved flow and knitting. It is non-extractable, non-staining, and usually used at 5-14 parts. Its effect on cure can be ignored. At higher levels additional sulfur or accelerator may be necessary (0.5 sulfur per 10 parts liquid Nipol 1312).

Natrochem DOA DLC-A is a di(2-ethylhexyl) adipate, silicon-dioxide blend plasticizer for NR, NBR, CR, and chlorinated PE. It gives good low temperature properties, excellent incorporation and easy handling.

Natrochem CI 25 DLC-A is a coumarone-indene resin, silicon-dioxide blend widely used in rubber, adhesive, paint, coating and allied industries.

Natro-Cel 100N-A is a naphthenic petroleum oil, silicon-dioxide blend plasticizer for NR, CR, SBR, EPM, EPDM, NBR, IR, IIR, and polyisobutylenes. It gives exceptionally fast incorporation; aids filler dispersion, and reduces pigment in colored stock.

Natro-Cel PE-A is a low molecular weight polyethylene grease, silicon dioxide blend, used as an internal lubricant and processing aid that helps mold flow, extruding and release. It also prevents tack in green rubber.

Polyester G25 DLC-A is a high molecular weight polyester-silicon dixoide blend plasticizer for NBR. Improves extrusion properties. Excellent incorporation and easy handling.

Natro-Cel BCA-A is a Di(butoxy-ethoxy-ethyl) adipate silicon dioxide blend low temperature plasticizer for NR, SBR, NBR, CR, polysulfides. Rapid incorporation, aids filler dispersion, large loadings may retard cure slightly.

Natrochem CI 10 DLC-A is a coumarone-indene resin, silicon-dioxide blend widely used in the rubber, adhesives, paints, coatings and allied industries.

Natrochem Rapeseed Oil DLC-A is a vegetable oil, silicon-dioxide blend that is easy to handle and disperses readily in various elastomeric systems. Rapeseed Oil DLC-A is a safe, effective plasticizer supplied as a convenient free-flowing powder.

Natro-Cel 200-A-65 is a mixed diaryl p-phenylenediamine, silicon-dioxide blend. It is soluble in natural rubber and plastics.

Natro-Cel 6400-A is a blend of glycol adipate and silicon dioxide. It functions as a plasticizer with low odor, low volatility and good compatibility.

Flexricin P4 DLC-A is a methyl acetyl ricinolate silicon dioxide blend plasticizer and processing aid for low temperature specification rubber compounds. Low volatility.

Tar-Cel 14-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar; gives easier, faster, and more accurate weighing.