Products

FULXUS® FX-K-160 is a use of super-high-molecular SEBS polymer gives stronger mechanical properties than the standard grade, and it has excellent tensile strength and stretch.

FULXUS® FX-TPV190 is a rubber like properties are strengthened with completely cross-linked EPDM. While it has better mechanical strength than FX-TPO-J series, it has lower percentage of elongation.

FULXUS® FX-G-140 is a specialized grade with excellent grip and it is positioned in the extreme opposite of FX-V series. It has stickiness and it is suitable for anti-slip etc.

FULXUS® FX-TA-160 is a special grade for adhesiveness with tape. Styrene elastomers have poor adhesiveness with tape, and FX-TA series offers better adhesiveness with tape.

FULXUS® FX-TPO-J160 is a olefin based standard grade. In this type, degree of cross-linking as well as the balance between workability and heat resistance is also adjusted.

FULXUS® FX-G-160 is a specialized grade with excellent grip and it is positioned in the extreme opposite of FX-V series. It has stickiness and it is suitable for anti-slip etc.

FULXUS® FX-BON-160 is a specialized grade with focus on adhesiveness with resins. It has high adhesiveness due to composition suitable for PP, PS, ABS, and the like.

FULXUS® FX-BON-140 is a specialized grade with focus on adhesiveness with resins. It has high adhesiveness due to composition suitable for PP, PS, ABS, and the like.

FULXUS® FX-G-180 is a specialized grade with excellent grip and it is positioned in the extreme opposite of FX-V series. It has stickiness and it is suitable for anti-slip etc.

FULXUS® FX-K-140 is a use of super-high-molecular SEBS polymer gives stronger mechanical properties than the standard grade, and it has excellent tensile strength and stretch.

FulxuS® FX-V-180 have used indigenous composition and have given a special focus to the feeling when touched with hands. Its physical properties are more or less same as the standard grade. However, this compound has smooth feeling not found in the conventional styrene elastomer.

FULXUS® FX-SB-180 is used by changing the base resin from SEBS to SBS, low cost products can be manufactured. However, it has low weather resistance, and therefore it is not suitable for outdoor use.

FULXUS® FX-TA-180 is a special grade for adhesiveness with tape. Styrene elastomers have poor adhesiveness with tape, and FX-TA series offers better adhesiveness with tape.

FULXUS® FX-TA-140 is a special grade for adhesiveness with tape. Styrene elastomers have poor adhesiveness with tape, and FX-TA series offers better adhesiveness with tape.

FULXUS® FX-K-180 is a use of super-high-molecular SEBS polymer gives stronger mechanical properties than the standard grade, and it has excellent tensile strength and stretch.

FULXUS® FX-V-140 have used indigenous composition and have given a special focus to the feeling when touched with hands. Its physical properties are more or less same as the standard grade. However, this compound has smooth feeling not found in the conventional styrene elastomer.

FULXUS® FX-SB-140 is used by changing the base resin from SEBS to SBS, low cost products can be manufactured. However, it has low weather resistance, and therefore it is not suitable for outdoor use.

FULXUS® FX-TPO-J170 is a olefin based standard grade. In this type, degree of cross-linking as well as the balance between workability and heat resistance is also adjusted.

FULXUS® FX-TPV180 is a rubber like properties are strengthened with completely cross-linked EPDM. While it has better mechanical strength than FX-TPO-J series, it has lower percentage of elongation.

FULXUS® FX-BON-180 is a specialized grade with focus on adhesiveness with resins. It has high adhesiveness due to composition suitable for PP, PS, ABS, and the like.

FULXUS® FX-V-160 have used indigenous composition and have given a special focus to the feeling when touched with hands. Its physical properties are more or less same as the standard grade. However, this compound has smooth feeling not found in the conventional styrene elastomer.

FULXUS® FX-SB-160 is used by changing the base resin from SEBS to SBS, low cost products can be manufactured. However, it has low weather resistance, and therefore it is not suitable for outdoor use.