Products

Nylene 33% glass fiber reinforced, heat stabilized nylon 6/6. Heat and chemical resistance inherent in nylon resins, while the glass fiber reinforcement gives greatly increased strength and stiffness. Suitable for such applications as brackets, levers, covers, and other uses where strength and stiffness are required. The ASTM line call out is D4066 PA012G33.

Nylene 33% glass fiber-reinforced nylon 6/6 molding resin offering the good strength properties expected from glass filled materials. Economy molding resin High heat and chemical resistance characteristic of nylon 6/6 GF materials

Nylene Very high viscosity extrusion resin having an ASTM relative viscosity of 800 Excellent structural strength, durability, and physical properties Good melt strength and good draw-down properties which promote dimensional control for extrusion of pipe, tubing, film, and sheet Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die.

Nylene General purpose 15% glass fiber reinforced PBT polyester resin Has the high chemical and heat resistance of PBT combined with improved strength and stiffness Suitable for brackets, levers, electrical connectors, housings and other similar uses

Nylene 20% flame-retardant mineral-reinforced PPE injection molding resin Has the inherent dimensional stability of PPE resins, while the addition of mineral reinforcement increases the strength and stiffness of finished parts Suitable for such uses as enclosures, housings, panels, and other applications where dimensional control and flame retardancy are desired

Nylene Nylon 6/6 Homopolymer resin with increased wear resistance and lubricity Suitable for injection molding applications Has the inherent strength, lubricity, and chemical resistance common to nylon 6/6 homopolymer materials while exhibiting lower friction and wear characteristics

Nylene Heat stabilized, 13% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness The product is approved to Ford Motor Company specification ESE-M4D349-A The ASTM line call out is D4066 PA012G13

Nylene High-flow 15% glass fiber reinforced PBT polyester resin Has the high chemical and heat resistance of PBT combined with improved strength and stiffness Suitable for levers, electrical connectors, housings and other parts which have long flow lengths or thin wall sections

Nylene 14% glass fiber reinforced, impact modified, heat stabilized nylon 6/6 Improved strength and stiffness over un-reinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions Suitable for handles, levers, support brackets, and other applications which require this unique blend of properties

Nylene 43% glass fiber reinforced heat stabilized nylon 6/12 Good chemical properties and reduced moisture absorption of nylon 6/12 resins while adding glass reinforcement to increase strength and stiffness Suitable in applications where typical nylon 6 or 6/6 may be unsuitable due to moisture absorption or specific chemical requirements On Special Order only.

Nylene High-viscosity nucleated extrusion grade, suitable for film co-extrusion, cast and blown film Excellent melt stability and strength, faster set-up for increased line speeds Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors Reduced coefficient of friction

Nylene High-flow unreinforced PBT injection molding resin Has the strength and resistance to heat, chemicals, and electricity typical of unreinforced polyester resins Suitable for uses such as connectors, housings, levers, and other applications which have long flow lengths or thin wall sections

Nylene Nylon 6/6 Homopolymer resin with increased wear resistance and lubricity Has the inherent strength, lubricity, and chemical resistance common to nylon 6/6 homopolymer materials while exhibiting lower friction and wear characteristics

Nylene 43% glass fiber reinforced, heat stabilized, nylon 6 injection molding resin Heat and chemical resistance typical of nylon 6 resins, while glass fiber reinforcement provides outstanding strength and stiffness The nylon 6 base resin also provides excellent surface appearance Suitable for brackets, supports, enclosures, handles, and any other uses which require high stiffness along with good appearance

Nylene 33% glass fiber reinforced heat stabilized nylon 6/12 Has the specific chemical properties and reduced moisture absorption of nylon 6/12 resins while adding glass reinforcement to increase strength and stiffness Suitable in applications where typical nylon 6 or 6/6 may be unsuitable due to moisture absorption or specific chemical requirements

Nylene 13% glass fiber reinforced, heat-stabilized nylon 6 injection molding resin Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins Improved strength and stiffness properties over unreinforced nylon Suitable for uses such as handles and levers, brackets, housings and enclosures

Nylene 13% glass fiber reinforced economy grade, heat-stabilized nylon 6 injection molding resin Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins Improved strength and stiffness properties over unreinforced nylon Suitable for uses such as handles and levers, brackets, housings and enclosures

Nylene 15% glass-reinforced, flame retardant PBT resin Has improved strength and stiffness, with inherent heat resistance and electrical properties, combined with a flame retardant package Suitable for such applications as appliance and tool housings as well as electrical connectors and coil bobbins

Nylene Duratel MF9-GF10 is 10% glass fiber reinforced general purpose acetal co-polymer. Duratel MF9-GF10 has increased strength and stiffness over unreinforced acetal. MF9-GF10 retains the chemical resistance and lubricity inherent in acetal materials. This product is suitable for brackets and levers, valve bodies, and other applications requiring this unique blend of properties.

Glass fiber-reinforced poly(butyleneterephthalate)(PBT) with good moldability and improved surface

Nylene General purpose unreinforced PBT injection molding resin Has the strength and resistance to heat, chemicals, and electricity typical of unreinforced polyester resins Suitable for uses such as connectors, housings, levers, and other applications which require this specific profile of properties