Products

NYCOFILL® CPM 10 150 KNF Black is a heat stabilized and 15% Short Glass Fiber Reinforced Nylon 6 copolymer compound suitable for injection molding. This resin was engineered for applications requiring high stiffness, and toughness.

Nyco6 715 is an unextracted, medium - high viscosity Nylon 6 resin for extrusion processing. The medium - high viscosity of the resin makes it suitable for tubing, complex profile extrusion, mandrel extrusion applications.

NYCOA’s NYCO66 5000 HSL is a heat stabilized and lubricated Nylon 66 resin for injection molding.

NYCO6 851 Nylon is a low viscosity Nylon 6 resin used for general-purpose injection molding and compounding.

NYCO6 534 H is a high viscosity; heat stabilized, nucleated Nylon 6 resin. The high viscosity and fast set-up time make an excellent material for extrusion of tubing, rods, sheet and film. Because of its fast set-up time, fast extrusion line speeds have been achieved.

NYCO6 471 HS is a medium viscosity Nylon 6 resin developed specifically for Rotational Molding.

NYCO6 512 HS is a medium viscosity injection molding and extrusion grade Nylon 6 Resin. It is nucleated for controlled crystallinity, and heat stabilized for a higher continuous use temperature.

NYCOTUFF 1595 HS is a medium viscosity Nylon 6 resin, which offers superior flexibility and toughness in both molding and extrusion applications. Its high melt viscosity and strength provides excellent processability and yields extremely tough and resilient finished articles.

NYCO6 446 is a high viscosity, nucleated Nylon 6 resin for extrusion processing. Its high viscosity and fast set-up time make NYCOA 446 an excellent material for extrusion of tubing, rods, sheet and film.

NYCOFILL 4120P is a glass-filled and impact modified resin particularly suitable for Injection Molding applications requiring increased ductility.

NYCO6 1417 HS is a heat stabilized and impact modified Nylon 6. This medium viscosity resin was developed for injection molding and extrusion processes for applications requiring improved toughness, flexibility, and good heat stability.

NYCO6 471 R is a medium viscosity Nylon 6 resin particularly suitable for extrusion processing. It possesses an excellent combination of strength, and toughness; as well as excellent heat, chemical, and abrasion resistance inherent to Nylon 6.

NYCO6 715 C is an unextracted, high viscosity Nylon 6 resin for extrusion processing. The high viscosity of the resin makes it suitable for complex profile extrusion, mandrel extrusion as well as for blow molding applications.

NYCO6 578 is a very high viscosity resin particularly suitable for extrusion processing. Its high melt viscosity and strength provide ease of processing film from either flat or circular dies.

NYCOADAPT 2065 is a medium viscosity Nylon copolymer suitable for injection molding and extrusion. This copolymer offers an excellent balance of mechanical properties and outstanding processability.

NYCO6 2001 is a flexible, high viscosity, impact modified Nylon 6 resin for extrusion processing and injection molding.

NYCOBOND XN-287 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a significantly lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

NYCOA NXTamid-T 2612 grades are long-chain nylons that deliver significant performance improvements and a unique balance of properties compared to short-chain materials such as Nylon 6 and Nylon 66. These products offer better dimensional stability, lower moisture absorption, and superior flexibility.

NYCO6 436 Nylon is general-purpose low viscosity injection-molding grade Nylon 6 that exhibits excellent melt fluidity, good toughness, stiffness, and strength.

NYCO6 1047 is a heat stabilized, lubricated and nucleated Nylon 6 resin suitable for injection molding and extrusion applications. It is recommended for applications that require continuous exposure to temperatures in excess of 110° C.

NYCO6 438 Nylon is general-purpose low viscosity injection-molding grade Nylon 6 that exhibits excellent melt fluidity, good toughness, stiffness, and strength.

NXTAMID-T 2612 STP is a heat stabilized Nylon 612 grade that offers outstanding toughness, flexibility, and impact strength. It has been specially formulated to give excellent resistance to zinc chloride, automotive fluids and hydrolysis.

NYCOTUFF 1595 HS Black B14 is a medium viscosity, impact toughened Nylon 6 based compound. It offers superior flexibility and toughness in both molding and extrusion applications. Its high melt viscosity and strength provides excellent processability and yields extremely tough and resilient finished articles.

NYCO6 471 is a medium viscosity Nylon 6 resin particularly suitable for extrusion processing. It possesses an excellent combination of strength, and toughness; as well as excellent heat, chemical, and abrasion resistance inherent to Nylon 6.

NYCO6 589 is an ultra-high viscosity Nylon 6 resin for extrusion processing. It retains good melt strength even at high processing temperatures. This trait makes it suitable for blow molding and blown film processing. Typical applications include profile extrusion, film extrusion, and blow molding.

NYCOBOND XN-187 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

NXTAMID-T 2610 is a Nylon 6,10 that features excellent dimensional stability, with low moisture absorption. This grade is available in custom viscosities, and additive packages. NYCOA offers NXTamid-T 2610 in a range of viscosities (LM, MV, HV for low, medium, and high viscosities, respectively), and with a variety of additive packages for improved performance.

NYCOFILL 6006 is a nylon-6 resin with a micro-silica filler. This resin displays the excellent stiffness associated with glass-fiber reinforcement, but without the typical processing difficulties and undesirable esthetics that come with the use of glass-fiber. This material also has outstanding resistance to greases, oils, and gasoline

NYCOFILL ASN 27 500 KNF Nat is a heat stabilized and 50% Short Glass Fiber Reinforced Nylon 6 compound suitable for injection molding. This resin was engineered for applications requiring high stiffness, and toughness.