Products

DBNPG is a thermosetting polyester resins. It can be formulated over a wide range of compositions to provide a broader selection of resin properties than those available with anhydride flame retardant. Resins formulated with it have high chemical and flame resistance minimal thermal discoloration and excellent light stability The high bromine content of it and its ready reaction into polyurethanes make it suitable for use in rigid polyurethane foams, UPE,PU rigid foams.

Zinc Stannate(ZS) is a white powder, insoluble in water, it is non‐toxic fire retardant and low heating rate of flame retardants, flame retardant and inhibit the double effect of the smoke. Suitable for use within the operating temperature below 570 °C material.

HBCD is particularly suited for providing flame retardant to expanded polystyrene (EPS) foam, extruded polystyrene foam (XPS) and textile back coatings that are used extensively in the building and construction industry. HBCD additives exhibit high efficiency at low use levels while making building insulation and textiles flame resistant.

TEP is a additive flame retardant. Use as fire‐retardant,strength agent of rubber,plastic and the material of pesticides,aging and steady agent of resin.

DBDPE is used in high‐impact polystyrene,engineering plastics,wires and cables,insulator,elastomer and thermoset plastics etc. HIPS, PE, PP, ABS, PBT, UPE, Epoxy.

MPP is mainly used in PA and PBT, especially PA6, PA66, glass fiber‐reinforced PA6,PA66.Nylon containing .MPP can be used in all kind of injection and extrusion process and meet all kind of processing demands of polyamide, glass fiber polyamide.

DLTDP is a good auxiliary antioxidant and is widely used in polypropylene, polyehylene, polyvinyl chloride, ABS rubber and lubricating oil. It can be used in combination with phenolic antioxidants to produce synergistic effect, and to prolong the life of the final products.

AO 1076 is a nonpolluting nontoxic Antioxidant with good heat‐resisting and water‐extracting performance. Widely applied to polyolefine, polyamide, polyester, polyvinyl chloride, ABS resin，synthesize rubber and petroleum product, often used with DLTP for promoting the antioxidative effect.

TBPA Diol is a reactive fire redardant, this product is mainly used for rigid polyurethane foam,adhesion agent and paint.

TBP is a 2,4,6‐Tribromophenol that is is reactive and additive with good thermal stability. It was mainly used in epoxy resin and polyurethane etc.

Zinc Borate 35 is one multi‐functional synergistic flame retardant with Antimony Oxide etc additives in polymers to improve flame retardant performance, it can reduce smoke evolution and adjust the balance of flame retardant properties versus mechanical, electrical and other properties. Zinc Borate 35 is widely used in PVC applications such as carpet, conveyor belt, wire and cable, and in Nylon, PE, PP, epoxy, polyesters, thermoplastic elastomers and rubbers . plastics of halogen free flame retardant systems based on Al(OH)3 and Mg(OH)3, intumescent coating and painting, ceramic glaze, milk glass, decorative paper etc fields. Zinc Borate is also used in wood composite as fungicide to prevent from decay fungi and subterranean termites . ZB200 grade's particle size is the smallest, it is recommended to wire and cable applications that need much fine particle size fields.

LS 770 is recommended to be used in polypropylene, impact modified PP(TPO),EPDM, polystyrene ,impact polystyrene ABS,SAN,ASA and polyurethanes and is also effective in polyamides and polyacetals. LS 770 is a low molecular weight hindered amine light stabilizer that provides excellent light stability for thick sections and films in the recommended substrates. Benefits of using LS770 is the high light‐stabilizing performance, particularly in PP thick sections. It has broad compatibility and can be easily dispersed. The recommended concentrations range between 0.1% and 0.5%,depending on the substrate, processing conditions and application. The optimum level is substrate and application specific. Extensive performance data of LS 770 in various substrates and for various applications is available upon request.

IPPP-95 is widely used for fabric coating, circuit boards, flooring, textiles, PVC, phenolic resin and other fields.

LS 944 is one kind of high molecular Lighl stabilizer, with multiple functional groups .It can be used in low density PE film, PP tape, EVA film, ABS, PP fiber PE, polyacetals ,polyamides,polyurethanes, PVC, PVC blending material, polystyrene, rubber and viscose, It can work with uv adsorbent because its special structutre and large molecular weight(3000).It also can be used in film and fiber.also can be used as antioxidant and heat stabilizer of polymer, The dosage of agricultural film is 0.2%.

TBNPA is a reactive flame retardant containing appox. 73% aliphatic bromine. It combines a high bromine content with exceptional stability and is particularly suitable where thermal. hydrolytic and light stability are required. Major uses of it are as a reactive intermediate for high molecular weight flame retardants, particularly in combination with phosphorus. and as a reactive flame retardant for polyurethanes where its high solubi1ity in the system makes it especially useful. It reacts through its single hydroxyl function to form pendant urethane groups. Its high bromine content and good compatibility in CFC‐free PU systems enables high standards of fire retardancy to be reached together with good foam properties in both rigid and flexible PU.

RDP is a halogen‐free phosphate ester flame retardant used in engineered resins, whose superiority is demonstrated in low volatility and high heat stability that that can tolerate high temperature processing required of many engineered resins. It can be recommended as flame retardant for PC/ABS, PPO/HIPS.

AO 1098 is a nonpolluting nontoxic Antioxidant with good heat‐resisting and water‐extracting performance. Widely applied to polyolefine, polyamide, polyester, polyvinyl chloride, ABS resin and petroleum product, often used with DLTP for promoting the antioxidative effect.

Light stabilizer 791 is a synergistic mixture of Light stabilizer 944 and Light stabilizer 770. It is an excellent UV stabilizer especially for PP thick sections, which offers excellent surface protection. It also shows high stabilization efficiency in PP tapes. Light stabilizer 791 areas of application are PP, PP/EPDM and PP/PE/EPDM blend (TPO’s). Light stabilizer 791 is an excellent UV stabilizer for thick sections.The synergism between the high and low molecular weight HALS components of Light stabilizer 791guarantees maximum protection for the polymer against degradation from UV radiation and long‐term heat exposure.

DBDPO is a kind of broad‐spectrum,high efficiency fire retardant with the features of low additive quantity. It is widely used rubber,textile,electronic,plastic industry etc.Especially used in HIPS,PE,PP,ABS,PBT,UPE, Epoxy,Nylon6, Textiles etc.

AO B225 with good synergistic of antioxidant 1010 and 168, can retard heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It can be widely used for PE, PP, PC, ABS resin and other petro‐products. The amount to be used may be 0.1%~0.8%.

FR-245 is a brominated cyanurate is a proprietary, additive flame retardant. The combination of aromatic bromine and cyanurate provides high FR efficiency and good thermal stability. A major use in ABS and HIPS. It combines good UV, impact and flow properties. It is non blooming.

IPPP-50 is widely used in PVC, fiber resin, synthetic rubber and pressure oil fields.

APP‐202 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from APP‐201 by micro‐encapsulation with melamine resin according to own method. APP‐202 is a fine‐particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non‐hygroscopic and non‐flammable. APP 201 is used in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber ,Paint and coating.

AO 3114 is a kind of tri‐function group phenolic antioxidant, without pollution and coloring up. Dependent on high molecular weight and melting point, it has low volatility, low transferring, and good water extraction resistance, while equips plastics with resistance to thermo‐oxidation and light‐oxidation. 3114 suits for PE, PP, PS, ABS, nylon, PVC, PU, cellulose and synthetic rubber, especially effective for polyolefin. When used with UV absorbent and phosphite ester, a synergistic effect can be reached, thus enhancing the thermo‐stability and light stability.

MCA is a Melamine Cyanurate is a halogen‐free flame retardant for polyamide.Steadable color, good electrical property and environmentally friendly, Melamine Cyanurate has established itself as the flame retardant to achieve UL 94 V‐0 especially for polyamide 6 and 6,6. Addition of MCA gives PA6(66) good mechanical and electrical properties.

FR‐117HF is an additive non‐halogen phosphate flame retardant used in flexible polyurethane foams, whose superiority is demonstrated in high efficiency and excellent non‐scorching performance. It is recommended as flame retardant in flexible furniture and automotive foams.

FR‐HF560 is an additive non‐halogen phosphate flame retardant used in flexible polyurethane foams, whose superiority is demonstrated in superior efficiency and lower viscosity. Doesn’t contain harmful chemical substances. It is recommended as flame retardant in flexible furniture and automotive foams.

FR‐504L is a chlorinated phosphate flame retardant which can be used in flexible polyurethane foams, and its superiority is demonstrated in low fogging and low scorch. It can readily be used to meet the standards such as California TB 117,FMVSS 302, UL 94 HF‐1, BS 5852, DIN 75200, CSE RF4 Class 1.

DOPO is used in plastics for electronics, circuit board, linear polyester, polyamide, epoxy resina and polyurethane.

FR-370 is an additive flame retardant developed for applications such as PP ,HIPS to reach class V‐2 according to the UL 94 standard, with outstanding UV and light stability. It is designed initially to provide an answer in the fast growing and developing field of PP, where the market was in need of a new more sophisticated flame retardant.The combination of both a high bromine content (70%) and phosphorous (3%) contributes to its excellent flame retardant efficiency.

FR‐HF‐4 is an additive flame retardant used in flexible polyurethane foams,whose superiority is demonstrated in very low scorch, low volatility, excellent hydrolytic stability, low fogging and processing characteristics. Foams containing the product exhibit good compression set and IFD properties.

AO B215 with good synergistic of antioxidant 1010 and 168, can retard heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It can be widely used for PE, PP, PC, ABS resin and other petro‐products. The amount to be used may be 0.1%~0.8%.

TPP is a non‐halogen flame retardant plasticizer for phenolic resin‐based, copper clad laminate, cellulose resin, vinyl resin and rubber, and some engineering plastics such as PPO.

IPPP35 is halogen‐free flame retardant phosphate ester plasticizer, the two will not pollute the environment; in the viscosity of the phosphate species is the lowest, the highest phosphorus content of a model. This product is colorless and transparent, good compatibility, but also by both flame‐retardant plastic, flame retardant and plasticized material in between play a balancing role, so raw materials can change their character and physical properties, widely for fabric coating, circuit boards, flooring, textiles, PVC, phenolic resin, and other fields.

FR‐690 is a chlorinated phosphate flame retardant used in rigid and flexible polyurethane foams, whose superiority is demonstrated in good stability. It can readily be used to meet the fire safety standards such as California TB 117, FMVSS 302, UL94 HF 1, British BS 5852, DIN 75200 and CSE RF4 Class 1.

DSTDP is a good auxiliary antioxidant and is widely used in polypropylene, polyethylene,polyvinyl chloride, ABS rubber and lubricating oil. It has high‐melting and low‐volatility .It can be used in combination with phenolic antioxidants and ultraviolet absorbers to produce synergistic effect.