Products

SULFOROKAnol L370 (Sodium C12-C15 Pareth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates, based on synthetic alcohol called INCI: Sodium Pareth Sulfate. The product has the consistency of a liquid paste, colorless to light yellow. The concentrated form of the commercial product, which contains 70% of the active substance, translates into an advantageous economic aspect by reducing the costs of storage and transport.

ABS acid is an anionic surfactant of the alkylbenzene sulfonate group, in acid form. Due to its acidic form, the product is available with an active content of more than 96%. ABS acid is a light brown to dark brown liquid. Thanks to the concentrated form, it is very cost-effective in terms of reducing transport costs.

SULFOROKAnol L327 (Sodium C12-15 Pareth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Pareth Sulfate), based on synthetic alcohol. The product comes in the form of a 27% water solution, from colorless to light yellow. SULFOROKAnol L327 is preserved with the MIT / CIT derivative, which ensures its microbiological purity.

PCC Chemax ABSNa 30 (Sodium Dodecylobenzene Sulfonate) is 30% sodium alkylbenzenesulphonic acid salt and belongs to the group of anionic surfactants. This product is in the form of a clear or turbid liquid of low color. In comparison with a similar product - ABSNa 30 - the product maintains a liquid form with low viscosity at room temperature, which significantly facilitates its dosing, pumping and has a positive effect on product stability also in winter.

ROKAnol® T10 (Ceteareth-10) belongs to non-ionic surfactants from the group of ethoxylated fatty alcohols, INCI name: Ceteareth-10. The product is based on high molecular mass alcohol of natural origin. It is produced in the form of soft wax of white color.

EXOhib PC400 is a corrosion inhibitor intended for paint products. The product is a mixture of aminoboranes and is provided in the form of approx. 50% aqueous solution having clear yellow color. EXOhib PC400 has very good wetting properties allowing to moisture steel surfaces, without any phosphates or nitrites. The product is highly compatible with acrylic, styrene-acrylic and vinyl-acrylic dispersions as well as with vinyl acetate copolymers.

POLIkol 200 (PEG-4) belongs to the group of polyoxyethylene glycols (PEG with an average molecular weight of 200). The product is a colorless liquid well soluble in water, with a relatively low viscosity and freezing point below 0 °C. It is characterized by the best alkali resistance among PEGs available in the offer and strong hygroscopic properties. In addition, it exhibits excellent dissolution capacity of the active ingredients.

POLIkol 300 (PEG-6)belongs to the group of polyoxyethylene glycols (PEG with an average molecular weight of 300). The product is a colorless liquid well soluble in water, with a relatively low viscosity and freezing point below 0 °C. It is characterized by good alkali resistance and strong hygroscopic properties. In addition, it exhibits excellent dissolution capacity of the active ingredients.

POLIkol 6000 flakes is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 6000), INCI name: PEG-135. The commercial product is available in the form of white to light yellow wax flakes. The solidification point of the product is 52-58 °C. The product is freely soluble in water and in low aliphatic alcohols. It is safe, non-toxic and does not cause skin irritation.

POLIkol 8000 flakes is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 8000), INCI name: PEG-180. The commercial product is available in the form of white to light yellow wax. The solidification point of the product is approximately 55 °C. POLIkol 8000 dissolves freely in water and in low aliphatic alcohols. It is safe, non-toxic and does not cause skin irritation.

POLIkol 6000 is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 6000), INCI name: PEG-135. The commercial product is available in the form of white to light yellow wax. The solidification point of the product is 52-58°C. The product is freely soluble in water and in low aliphatic alcohols. It is safe, non-toxic and does not cause skin irritation.

POLIkol 400 (PEG-8) to the group of polyoxyethylene glycols (PEG with an average molecular weight of 400). The product is a colorless liquid, well soluble in water. It is characterized by strong hygroscopic properties. In addition, it exhibits excellent dissolution capacity of the active ingredients.