Products

ABSNa 50 belongs to the group of anionic surfactants and is the sodium salt of alkyl benzene sulfonic acid with a concentration of 50%. The product is in the form of concentrated paste, which translates into economic benefits, for example in the case of using the product for the production of washing powders.

Rokopol® F3600 is a polyether polyol, a block/statistical copolymer of ethylene oxide and propylene oxide based on glycerine. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 45–50 mgKOH/g, and dynamic viscosity within the range of 540-620 mPas.

PCC Chemax Hydrochloric acid for food grade industry 33% is a chemical compound that is an aqueous solution of hydrogen chloride gas. It has strong corrosive properties, a strong, irritating odor, and colorless to pale yellow. Hydrochloric acid food grade is produced by the direct synthesis of elements - burning of chlorine in hydrogen and then the absorption in the water of the resulting hydrogen chloride. Hydrochloric acid is supplied to the market at a concentration of 33% to 35.5%.

GREENLINETM Soda Lye (50% aqueous solution) belongs to inorganic chemical compounds from the hydroxide group. The product is manufactured in an environmentally friendly production process based on membrane technology, which is currently the most modern technology in the world. Membrane technology uses significantly less energy compared to other methods for obtaining sodium hydroxide. In addition, the energy consumed in the production of GREENLINETM Soda Lye is covered by guarantees of origin of energy from renewable energy sources. These guarantees are issued only for energy produced from renewable sources, contributing to a significant reduction in CO2 emissions into the atmosphere.

PCC Chemax Nonylphenol is a colorless, viscous liquid with a characteristic phenolic odor. It is a mixture of isomers containing mainly p-nonylphenol. Nonylphenol is soluble in aliphatic alcohols, ketones, esters and aliphatic hydrocarbons and difficult soluble in water.

Rokopol® M5000 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-35 mgKOH/g and dynamic viscosity within the range of 700-960 mPas at temp. 25°C.

Rokopol® M5020 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-38 mgKOH/g, and dynamic viscosity within the range of 700-1000 mPas at temp. 25°C

Rokopol® M6000 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 27-29 mgKOH/g, and its dynamic viscosity is within the range of 1050-1250 mPas at temp. 25°C.

PCC Chemax Monochloroacetic acid 100% technical, flakes is a product, in which the DCAA content does not exceed 1500 ppm. Chloroacetic acid 100% is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is readily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated derivatives.

PCC Chemax Hydrochloric acid 33% grade is a by-product of MCAA (monochloroacetic acid) production process. It is highly corrosive, has a pungent, irritating smell, transparent to pale-yellow color. It is delivered to the market in liquid form in concentration from 33% to 34%, in 1000L IBC containers, in 24 t road tank cars, in 56 t dedicated rail tank cars. The hydrochloric acid 33% is produced in the process by chlorination of organic compounds.

Rokopol® iCan 2432 is a specialist, base polyether polyol dedicated to production of one-component high-efficiency foams (OCF). It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 145-160 mgKOH/g, and dynamic viscosity within the range of 150-250 mPas at temp. 25°C.

PCC Chemax Monochloroacetic acid 100% H-P, flakes is a product, in which the DCAA content does not exceed 1500 ppm. Chloroacetic acid 100% is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is readily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated .

PCC Chemax DME Aerosol is an organic compound from the group of ethers. It is a colorless gas with a characteristic odor, moderately soluble in water. The product in aerosol is used as a propellant (factor for discharging content). It is used instead of the previously applied CFCs, as it has no harmful effect on the ozone layer. The product is therefore environmentally friendly. DME in the aerosol present in a concentration of not less than 99.99%. It is produced in the dehydration of methanol followed by DME rectification.

Rokopol® iCan 4100 is a specialized, base polyether polyol dedicated to production of winter, assembly one-component foams (OCF). It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 150-165 mgKOH/g, and dynamic viscosity within the range of 200-350 mPas at temp. 25°C.

PCC Chemax Monochloroacetic acid 80% U-P is a product of the highest purity available, in which the DCAA content does not exceed 90 ppm. It is intended for use primarily in pharmacy in processes where the DCAA content is critical to the quality of the final product. Chloroacetic acid 80% H-P is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is easily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated derivatives.

PCC Chemax Monochloroacetic acid 80% H-P is a high purity product characterized by DCAA levels suitable for most processes where both color (colorless, clear) and low levels of pollution (DCAA <500ppm) are critical. Chloroacetic acid 80% H-P is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is readily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated derivatives.

PCC Chemax Nonylphenol LV is a colorless, viscous liquid with a characteristic phenolic odor. It is a mixture of isomers containing mainly p-nonylphenol. Nonylphenol is characterized by reduced viscosity: 1500-1800 mPa*s at 25°C, as compared to the standard quality of nonylphenol. Nonylphenol LV is soluble in aliphatic alcohols, ketones, esters and aliphatic hydrocarbons and difficult soluble in water.

Dichloropropane (DCP) is a clear, colorless liquid with no mechanical impurities with a characteristic odor. Dichloropropane is obtained in the production of propylene oxide, then distilled for several times. The improvement of the production process allowed the increase of the purity of DCP from min. 97.5% to min. 99%. As a result, the product has gained greater recognition within overseas markets.

GREENLINETM caustic soda in flakes, is an inorganic chemical that belongs to the strongest bases. Energy used to produce GREENLINETM Caustic Soda is covered by guarantees of origin of energy from renewable energy sources. They are issued only for energy produced from renewable sources, which results in a significant reduction of CO2 to the atmosphere. also GREENLINETM Caustic Soda is produced by membrane electrolysis, which is currently the most modern technology in the world. This technology uses significantly less energy compared to other methods for producing sodium hydroxide.