Products

Rokopol® F3600 is a polyether polyol, a block/statistical copolymer of ethylene oxide and propylene oxide based on glycerine. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 45–50 mgKOH/g, and dynamic viscosity within the range of 540-620 mPas.

Rokopol® M5020 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-38 mgKOH/g, and dynamic viscosity within the range of 700-1000 mPas at temp. 25°C

Rokopol® iCan 2432 is a specialist, base polyether polyol dedicated to production of one-component high-efficiency foams (OCF). It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 145-160 mgKOH/g, and dynamic viscosity within the range of 150-250 mPas at temp. 25°C.

PCC Chemax DME Aerosol is an organic compound from the group of ethers. It is a colorless gas with a characteristic odor, moderately soluble in water. The product in aerosol is used as a propellant (factor for discharging content). It is used instead of the previously applied CFCs, as it has no harmful effect on the ozone layer. The product is therefore environmentally friendly. DME in the aerosol present in a concentration of not less than 99.99%. It is produced in the dehydration of methanol followed by DME rectification.

PCC Chemax Monochloroacetic acid 80% H-P is a high purity product characterized by DCAA levels suitable for most processes where both color (colorless, clear) and low levels of pollution (DCAA <500ppm) are critical. Chloroacetic acid 80% H-P is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is readily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated derivatives.

PCC Chemax Monochloroacetic acid 80% U-P is a product of the highest purity available, in which the DCAA content does not exceed 90 ppm. It is intended for use primarily in pharmacy in processes where the DCAA content is critical to the quality of the final product. Chloroacetic acid 80% H-P is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is easily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated derivatives.

PCC Chemax Monochloroacetic acid 100% H-P, flakes is a product, in which the DCAA content does not exceed 1500 ppm. Chloroacetic acid 100% is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is readily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated .

PCC Chemax Monochloroacetic acid 100% technical, flakes is a product, in which the DCAA content does not exceed 1500 ppm. Chloroacetic acid 100% is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is readily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated derivatives.

Dichloropropane (DCP) is a clear, colorless liquid with no mechanical impurities with a characteristic odor. Dichloropropane is obtained in the production of propylene oxide, then distilled for several times. The improvement of the production process allowed the increase of the purity of DCP from min. 97.5% to min. 99%. As a result, the product has gained greater recognition within overseas markets.

Rostabil TPP is an aryl phosphite in the form of a clear liquid with a characteristic, delicate fragrance. It is used as an intermediate in many chemical syntheses. Phosphorus on the third oxidation stage affects its good reduction capabilities used in the deoxygenation process, e.g. sulphoxides to sulfides or aliphatic epoxides to alkenes. The mildly nucleophilic nature of phosphite is used in the conversion of alcohols to alkyl halides.