Products

Cel-Span® CFA 840 is a 40% active endothermic foaming agent concentrate, suitable for a variety of olefin resins such as polyethylene and polypropylene. Cel-Span® CFA 840 is recommended for extrusion, injection, and structural foam molding of polyolefins.

Cel-Span® CFA 800 is an endothermic foaming agent concentrate recommended for injection molding & extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 800 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications. This product has been engineered to eliminate splay and to exhibit good surface esthetics for solid injection foam parts.

Cel-Span® Process Aid 610L is a processing concentrate in a compatible resin carrier used in extrusion and injection processes to enhance flow and reduce the processing temperature while increasing productivity for all types of polyolefin resins. Cel-Span® Process Aid 610L contains a unique additive that enhances the flow characteristics of polyolefin resins, reduces cycle time, while improving mold filling in multiple cavity molds. In extrusion and blow molding applications, Cel-Span® Process Aid 610L enhances flow and reduces processing temperature of polyolefin resins as much as 30 to 50 degrees. This reduction in processing and melt temperatures results in less polymer degradation, better color, lower cycle time and higher output especially in sheet, injection molding,and blow molding applications, and extrusion applications.

Cel-Span® CFA 844 is a highly loaded 80% active endothermic foaming agent formulated for applications with high gas requirements. Cel-Span® CFA 844 concentrate releases carbon dioxide gas upon decomposition. This product is safe when used under the conditions of intended use. Upon complete decomposition (activation) of the C.F.A., the extruded and injected parts will become white, a color common to endothermic chemical foaming agents.

Cel-Span® CFA 899 is a 40% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899 is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

Cel-Span® CFA 899PS is a 20% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899PS is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

Gaia® Antimicrobial AB 505 is an organic concentrate that helps to control or retard the growth of bacteria, fungus, and algae in plastic molded parts. Gaia® Antimicrobial AB 505 is a powerful additive concentrate produced in an LLDPE carrier resin for ease of dispersion. This product has been used in film, injection molding, and extrusion applications to control growth of bacteria, yeast, mold, and algae. In independent testing, Gaia® Antimicrobial AB 505 has been shown to inhibit ecoli and staphylococcus. A loading of 1.5% - 3% will protect plastic articles for an estimated 1 – 2 years. Recommended temperature range should not reach above 428°F.

Gaia® Antimicrobial AB 504 is an organic concentrate produced from citrus extracts that control or retard the growth of bacteria, fungus, and algae in plastic rotational molded parts. Gaia® Antimicrobial AB 504 is a powerful additive concentrate produced in an LLDPE carrier resin for ease of dispersion. Gaia® Antimicrobial AB 504 is used in the inner core of the rotationally molded structures. This product is used especially in molded polyethylene water tanks used throughout Latin America

Cel-Span® S 100 is a compounded additive for color stabilization and dispersion. A unique proprietary compounding technique makes it possible to pelletize the entire active stabilizer and dispersant in the formulation without adding additional heat history. Cel-Span® S 100 should be utilized at 0.25% to 1% consistently during the color concentration manufacturing processes for stabilization and dispersion. Cel-Span® S 100 also lessens degradation of pigments and enhances the brightness of color concentrates. The pigment is initially dispersed by dispersing agents in order to prevent the formation of uncontrolled flocculates; a process of contact and adhesion whereby the particles of dispersion form larger-size clusters. Stability of dispersion is a result of interplay of the heat (kinetic) energy of particles, attractive inter-particle forces, and repulsive forces; this also helps to limit short-range Van der Waals forces.

Cel-Span® CFA 897 is a 40% active endothermic foaming agent concentrates recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 897 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications.

Cel-Span® Process Aid 101 is a 100% active (powder or pellet) internal lubricant processing aid with anti-static properties that are incorporated into the resin. Cel-Span® Process Aid 101 eliminates the need for an external mold release agent and improves resin flow, dispersion, resin additives ex:(reinforcements, fillers, and pigments), and reduces cycle time. The use of Cel-Span® Process Aid 101 will not have an adverse effect on the physical properties. Compatible with Polyethylene, Polystyrene, and Polypropylene.

Cel-Span® FR 680 is a highly loaded 80% concentrate flame retardant tailored for a variety of applications including injection molding and sheet extrusion. Cel-Span® FR 680 was designed to be a cost effective retardant made for polyethylene requirements including the Boston Fire Department Test and the NFPA – 701 small scale test. The use of Cel-Span® FR 680 will result in excellent flame retardancy to pass several flammability requirements. Flame testing has shown that recommended levels between 8% - 25% are intended as guidelines, but optimization is necessary for each application because of the differences between equipment, resin systems, additives and flame retardancy requirements.

Cel-Span® S 310 is a compounded antioxidant concentrate in HDPE & LLDPE blends to provide thermal stabilization to polymers at high temperatures and during routine maintenance shut-down procedures. Cel-Span® S 310 is an effective shut down stabilizer for all polyolefin resins. It is used to protect these materials from thermal degradation during exposure to processing temperatures maximizing the inherent physical properties of the natural resins. When used at a 5-10% level, Cel-Span® S 310 can be left in extruders, dies, and other process equipment during routine maintenance “shut down and start up” procedures, to prevent unwanted polymer degradation, and help keep the process equipment clean and free of black specs and degradation.

Cel-Span® UVS 717 is a (HALS) concentrate containing a stabilizer package for injection blow molding, extrusion and film applications for polyethylene. Hindered Amine Light stabilizers are the most effective light stabilizers for polyolefins. HALS is extremely efficient because these special additives continuously repopulate themselves during the UV stabilization process.

Cel-Span® Process Aid 305 contains a powerful water-seeking additive that chemically combines and eliminates lensing and porosity in blown and cast extrusion, injection, compounding, and pipe applications caused by surface moisture or incorporated into the resin during processing. CelSpan® Process Aid 305 contains a very effective additive that chemically traps water to eliminate moisture. This product can be used to eliminate moisture in high temperature engineering resins such as nylon and is utilized by metering in at 2% - 5% depending on the level of moisture.