SLOVAMID 6 GF 25

Identification & Functionality

Chemical Family

Polyamides

Fillers Included

Glass Fiber

Polymer Name

Polyamide 6 (PA 6)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Features & Benefits

Materials Features

Chemical Resistant,

Good Toughness,

High Strength

Applications & Uses

Markets

Automotive & Transportation,

Consumer Goods,

Electrical & Electronics,

Industrial

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Interior,

Other Automotive Applications,

Powertrain & UTH

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts,

Tooling & Moldmaking

Electrical & Electronics — Devices & Assemblies

Automotive Electronics,

Other Devices & Assemblies

Plastics & Elastomers End Uses

Appliances,

Automotive Applications,

Automotive Interior Parts,

Gears,

Molds/Dies/Tools,

Power/Other Tools

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Strength	140	MPa	ISO 527
Tensile Modulus	7400	MPa	ISO 527
Flexural Strength	200	MPa	ASTM D 790
Flexural Modulus	6300	MPa	ASTM D 790
Charpy Notched Impact Strength (-20°C)	7	kJ/m2	ISO 179/1eA
Charpy Impact Strength (23°C)	50	kJ/m2	ISO 179/1eU
Charpy Notched Impact Strength (23°C)	10	kJ/m2	ISO 179/1eA
Charpy Impact Strength (-20°C)	27	kJ/m2	STN EN ISO 179
Elongation	3	%	ASTM D638

Physical Properties

	Value	Units	Test Method / Conditions
Melt Mass Flow Rate - MFR (230°C/2.16 kg)	3	g/10 min	ASTM D1238
Density	1.3	g/cm3	ISO 1183/A
Water Content	0.15	%	STN EN ISO 3344

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature - HDT	200	°C	STN EN ISO 75-2 (A)
Melting Temperature (DSC)	220	°C	STN EN ISO 11357-1
Vicat Softening Temperature (B)	210	°C	STN EN ISO 306

Electrical Properties

	Value	Units	Test Method / Conditions
Surface Resistivity	8.00E+13	ohm	STN 34 6460
Electric Strength	20	kV/mm	IEC 60243-1
Comparative Tracking Index - CTI (A)	575	V	STN EN 60112
Volume Resistivity	500000000000.0	ohm.m	STN 34 6460

Flammability

	Value	Units	Test Method / Conditions
Glow Wire Test (3 mm)	650	°C	STN EN 60695-2-12
Flammability	HB	-	UL 94

Processing Parameters

	Value	Units	Test Method / Conditions
Mold Temperature Range	70 - 90	°C	--
Drying: Temperature/Time	80/04	°C/h	--
Manufacturing Shrinkage - length/width	0.50/1.38	%	STN EN ISO 294-4
Injection Pressure	70 - 120	MPa	--
Melt Temperature Range	250 - 280	°C	--