Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Thermal Properties
- Impact Properties
- Injection Molding
- Note
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Value | Units | Test Method / Conditions | |
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 4100 | MPa | ASTM D790 |
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹ | 145 | MPa | ASTM D790 |
Tensile Stress (Break, Type I, 50 mm/min) ¹¹ | 103 | MPa | ASTM D638 |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 197 | °C | ASTM D648 |
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ | 215 | °C | ASTM D648 |
Vicat Softening Temperature (Rate B/50) ¹¹ | 201 | °C | ASTM D1525 |
Value | Units | Test Method / Conditions | |
Izod Impact (Notched, at 23°C) ¹¹ | 65 | J/m | ASTM D256 |
Izod Impact (Unnotched, at 23°C) ¹¹ | 610 | J/m | ASTM D4812 |
Value | Units | Test Method / Conditions | |
Drying Temperature ⁷ | 100 - 110 | °C | — |
Drying Time ⁷ | 3 | Hrs | — |
Maximum Moisture Content ⁷ | 0.02 | % | — |
Melt Temperature ⁷ | 250 - 265 | °C | — |
Nozzle Temperature ⁷ | 245 - 260 | °C | — |
Front - Zone 3 Temperature ⁷ | 250 - 265 | °C | — |
Middle - Zone 2 Temperature ⁷ | 245 - 260 | °C | — |
Rear - Zone 1 Temperature ⁷ | 240 - 255 | °C | — |
Mold Temperature ⁷ | 65 - 90 | °C | — |
Screw Speed ⁷ | 50 - 80 | rpm | — |
Back Pressure ⁷ | 0.3 - 0.7 | MPa | — |
Packaging & Availability
- Country Availability
- Regional Availability