company tower banner

Products

PolyMirae

Matching Product Categories

Plastics

Elastomers

5 Products found on PolyMirae

SDSWith SDS

TDSWith TDS

Metocene HM2089 banner

Metocene HM2089

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Film Extrusion, Extrusion, Thermoforming
Melt Flow Index:9.0 - 9.0 g/10 min

Metocene HM2089 is a metallocene-catalyzed homopolymer for film applications. The use of metallocene catalysts in the production of these homopolymers results in resins with improved optical and processing characteristics, combined with exceptional purity. Metocene HM2089 doesn’t contain nucleating agent or film additivations such as slip agent. Film produced with Metocene HM2089 will show high stiffness and long dyne retention time.

Moplen EP300H banner

Applications:Other Consumer Goods Applications, Sports & Recreation, Other Automotive Applications
Product Families:EP Rubbers (EPDM), Thermoset Elastomers
Chemical Family:Polyolefins, Ethylene-Propylene Copolymers (EPR)
Polymer Name:Ethylene Propylene Copolymer
End Uses:Containers, Toys, Pails

Moplen EP300H is a heterophasic copolymermanufactured by PMC under the license of LyondellBasell using Spheripol process. Moplen EP300H is suitable for injection molding as well as for thermoforming applications. The features ofMoplen EP300H are an excellent low temperature impact resistance combined with a good processability. Moplen EP300Hmeets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.

Adstif HA686J banner

Polymer Name:High Crystallinity Polypropylene (HCPP)
Processing Methods:Thermoforming
Melt Flow Index:3.0 - 3.0 g/10 min

Adstif HA686J is a high crystalline polypropylene homopolymer manufactured by PMC under the license of Lyondellbasell using the Spheripol process. Adstif HA686Jis particularly suitable for sheet and thermoforming with good stiffness and heat resistance properties. Adstif HA686J resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.

Moplen EP300C banner

Polymer Name:Polypropylene Block Copolymer (PP Block Copolymer)
Processing Methods:Thermoforming
Melt Flow Index:0.5 - 0.5 g/10 min

Moplen EP300C is the polypropylene block copolymer manufactured by PMC under the license of Lyondellbasell using Spheripol process. Moplen EP300C is a polypropylene block copolymer typically used in sheet and thermoforming applications. Moplen EP300C meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.

Moplen EP300K banner

Applications:Other Electrical & Electronics Applications, Other Automotive Applications, Housewares
Product Families:EP Rubbers (EPDM), Thermoset Elastomers
Chemical Family:Polyolefins, Ethylene-Propylene Copolymers (EPR)
Polymer Name:Ethylene Propylene Copolymer
End Uses:Housewares, Crates

Moplen EP300K is a low fluidity heterophasic copolymer manufactured by PMC under the license of Lyondellbasell using Spheripol process. Moplen EP300K is suitable for injection molding applications. The product exhibits very high impact even at low temperature combined with a good stiffness. Moplen EP300K is typically used in housewares and crates. Moplen EP300K meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.