Products

Alcure® 4400 is a general purpose, polymeric aliphatic isocyanate hardener based on ipdi and blocked with E-caprolactam. When properly formulated in coating powders, this product will yield a coating with excellent flow and good overall physical properties.

Polymac® WR 220-3204 is a water soluble polymer designed for use in industrial enamels. It can produce coatings with excellent color and gloss retention, adhesion properties and good hardness development. This resin is supplied in a HAPs-free solvent blend. Manufactured in North America. All components of this product are listed on the DSL.

Rezimac® HS 57-5754 is a high solids phenolic-modified alkyd resin that was designed for use in industrial or industrial maintenance air-dry finishes. Coatings based on this resin exhibit rapid-dry characteristics coupled with excellent salt spray and topcoat lifting resistance.It can be formulated to meet TT-P-664D. Manufactured in North America. All components of this product are listed on the DSL.

Rezimac® HS 57-5747 is a high solids silicone-modified alkyd resin designed for air-dry industrial applications where excellent exterior gloss and color retention are critical. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5650 is a catalyst-free, carboxy-functional polyester resin designed to cure using TGIC at a 93:7 TGIC ratio. The resulting films using this resin system are characterized by high gloss, excellent hardness, excellent flexibility and color retention, and good exterior durability.

Alcure® 4402 is a high performance, polymeric aliphatic isocyanate hardener based on ipdi and blocked with E-caprolactam. When properly formulated in coating powders, this product will yield a coating with excellent flow and excellent overall physical properties.

Aquamac® 510 is an all acrylic latex polymer exhibiting excellent adhesion and grain crack resistance. This latex finds applications in interior and exterior flat and satin house paints. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5900 is a carboxyl-functional polyester resin designed for cure with TGIC in a 90:10 ratio. The resulting coatings exhibit excellent exterior durability, flow and mechanical properties, along with better hardness and solvent resistance than powder coatings based on a 93:7 system. By physical blending coatings based on polymac® 5900 and polymac® 5400, matte finishes can be achieved. Polymac® 5900 is TMA-free.

Rezimac® HS 216-2134 is a high solids low viscosity tung/phenolic resin for use in wood stains and varnishes. Manufactured in North America. All components of this product are listed on the DSL.

Macopol® 53-5359 is an acrylic-modified alkyd copolymer designed for excellent exterior durability with fast dry and good adhesion to metal surfaces. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® HS 220-2015 is a high solids aliphatic polyester featuring high gloss and excellent clarity and color. It is designed to provide 2.8 VOC compliant coatings that exhibit superior weatherability, excellent durability and a balance of film properties, including skydrol resistance. Polymac® HS 220-2015 is an excellent blending resin for acrylics and similar resins to enhance film performance and VOC in either isocyanate or melamine cured coatings. Manufactured in North America.

Aquamac® 705 is a high gloss styrene acrylic latex featuring outstanding color and gloss retention as well as an excellent combination of hardness and flexibility. This resin exhibits outstanding early water resistance, salt spray and quv/prohesion corrosion resistance. It provides good airless spray properties that produce high performance metal protective finishes. Coatings formulated with this Aquamac® 705 also exhibit outstanding adhesion to smooth, polished or difficult-to-grip metal surfaces. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 207-1405 is a chain-stopped short oil alkyd resin. It is recommended for implement finishes and other uses where a high quality, fast-drying finish with good durability properties is desired. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® HS 207-2725 is a high solids chain-stopped alkyd resin. It was designed to produce lacquer-like dry times and low viscosity at relatively low VOC. Manufactured in North America.

Polymac® 220-1001 is an extremely durable HAPs-free polyester. This resin is designed for two-component isocyanate crosslinked systems that require gloss and color retention, as well as chemical and abrasion resistance. It is compatible with other polyesters and acrylic polyols. Manufactured in North America.

Polymac® 5190 is a high reactivity, bloom-resistant, storage-stable carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 wt. Ratio. It will cure at 130°c for 25 minutes. The resulting coatings exhibit excellent exterior durability and mechanical properties along with good flow.

Polymac® 66-6686 is a high solids polyester resin that was designed as a premium performance resin when cured with polyurethane prepolymers. It also provides superior weathering in very high quality baking systems when crosslinked with melamine resins. Manufactured in North America. All components of this product are listed on the DSL.

Macopol® HS 214-2122 is a high solids acrylic-modified alkyd with excellent durability, color and gloss retention that can produce 3.5 lbs/gal VOC formulas at good spray viscosity. Manufactured in North America.

Polymac® WR 220-3203 is a water soluble polymer designed for use in industrial enamels. It can produce coatings with excellent color and gloss retention, adhesion properties and good hardness development. This resin is supplied in a HAPs-free solvent blend. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® HS 220-2010 is a high solids polyester resin that is HAPs-free. It is designed to produce 2.8 VOC compliant coatings with superior weatherability and excellent film properties, including skydrol resistance. It is an excellent blending resin for acrylics and similar resins to enhance film performance and VOC in either isocyanate or melamine cured systems. Manufactured in North America.

Alcure® 4430 is a high performance, polymeric aliphatic isocyanate hardener based on H12MDI and blocked with E-caprolactam. When properly formulated in coating powders, this product will yield a coating with excellent flow and chemical resistance and good overall physical properties.

Macopol® HS 214-1158 is a styrene acrylic-modified alkyd resin with excellent exterior durability. The copolymer is supplied in a HAPs-free solvent and can be formulated to produce coatings applied at 420 g/l VOC. Manufactured in North America.

Duramac® 51-5110 is a chain-stopped medium oil alkyd resin. Manufactured in North America. All components of this product are listed on the DSL.

Aquamac® 450 is an all acrylic latex polymer that exhibits good balance between hardness and adhesion. It was designed for use in floor paints, block fillers, sealers, and interior and exterior architectural applications. Manufactured in North America. All components of this product are listed on the DSL.

Rezimac® 213-1285 is a silicone-modified alkyd resin designed for coatings that require excellent exterior color and gloss retention. Also recommended for government specification, high heat-resistant aluminum coatings. Manufactured in North America. All components of this product are listed on the DSL.

Aquamac® 440 is a styrene acrylic latex for high gloss paints in architectural and light-duty industrial applications. It offers the formulator a low VOC alternative to alkyds for high gloss, interior trim, kitchen and bath, as well as dtm applications. This is a very versatile latex resin that is compatible with a variety of latex and water reducible resins in blend systems. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® HS 207-2852 is a high solids chain-stopped alkyd resin. It was designed to produce low viscosity at relatively low VOC. This resin is HAPs-free. Manufactured in North America.

Duramac® HS 57-5720 is a high solids chain-stopped alkyd resin. Coatings based on this resin exhibit rapid dry rates, excellent gloss and hardness, and good salt spray and humidity resistance. These properties make Duramac® HS 57-5720 suitable for general industrial use. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5040 is a low reactivity, high tg carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 ratio 94:6 ratio is also possible . The resulting coatings exhibit excellent flow, exterior durability and mechanical properties, and enhanced impact fusion resistance. Polymac® 5040 is TMA-free.

Acrylamac® 232-2780 is a 70% solids hydroxyl-functional thermosetting solution acrylic resin supplied in mak. It was designed for 420 g/l VOC, two-component acrylic polyurethane clear coat formulations for aerospace applications.

Acrylamac® 232-1711 is a HAPs-free solution acrylic polyol. This resin exhibits outstanding appearance, gloss, color retention and exterior durability. Manufactured in North America.

Duramac® HS 207-2707 is a high solids chain-stopped short oil alkyd. It is designed to produce extremely fast-drying enamels and primers at VOC compliant levels. It has good exterior durability and fast cutback viscosity. Manufactured in North America.

Duramac® HS 204-2768 is a very durable high solids medium oil alkyd resin. This resin reduces rapidly for improved application properties in high solids enamels. Manufactured in North America.

Polymac® 5050 is a carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 ratio and with primid XL 552 in a 95:5 ratio. The resulting coatings exhibit excellent flexibility, excellent flow and good exterior durability. Polymac® 5050 is TMA-free.

Polymac® 5160 is a high gloss, general purpose carboxyl-functional polyester resin designed for cure with TGIC at a 93:7 ratio and with primid xl-552 at a 95:5 ratio. The resulting coatings exhibit excellent flow, good flexibility and superior exterior durability. Polymac® 5160 is TMA-free.

Alcure® 4470 is a high performance, low temperature-curing polymeric aliphatic isocyanate hardener based on ipdi and blocked with triazole. When properly formulated in coating powders, this product will yield a coating with excellent flow and good overall physical properties. This product is exterior durable.