Products

N73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N73B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN70.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace applications Pumps Valves

V74C is a fluoroelastomer (FKM) material developed to offer extremely low compression set combined with excellent heat aging properties.V74C has been engineered to retain its mechanical properties significantly longer than conventional FKM grades even under extreme temperature cycling, thereby providing increased service life and significantly lower the cost of ownership.V74C exhibits good resistance to acids and aqueous media, and excellent resistance to oil, fuels and hydraulic fluids at high temperature.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes Extremely low compression set and cumulative compression set providing extended seal life Excellent long-term high temperature stability Superior heat aging properties for long-term sealing Typical Applications Vacuum pumps & compressors (high temperature applications) Mechanical seals Chemical pumps and valves Couplings and quick connectors

V76F is a peroxide-cured tetrapolymer (70% fluorine) formulated for high performance sealing applications in today's aggressive industrial environments.V76F has been developed to provide outstanding resistance to solvents, fuels, hot water and steam (above 150°C/302°F).V76F also offers superior resistance to acids, oils, coolants and hydraulic fluids, making it ideal for use in fuel systems, chemical processing equipment and certain critical diesel engine locations.Alternative to lead-containing (litharge-cured) steam resistant grades.Key Attributes Excellent resistance to fuels and solvents Excellent resistance to oils, steam/water and hydraulic fluids High temperature performance Superior long-term sealing performance Typical Applications Marine diesel engines (e.g. fuel systems, cooling ports) Biofuel processing equipment Heat exchangers Paper/pulp processing equipment Hot water/steam systems

Fluoroelastomer Rubber, 90-98 °IRHD. Terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene. To meet ASTM D2000 line call-out M3HK914, A1-10, B37, B38, EF31, EO78, Z1. Where Z1 = hardness 90-98. ASTM designation = FKM. ISO designation = FPM.A hard, anti-extrusion resistant rubber, specially designed for use in high pressure applications. Excellent resistance to oils, fuels and hydraulic fluids at high temperature.

N83B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N83B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN80.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace Applications

V75J is a peroxide-cured terpolymer formulated for high performance sealing applications in today's aggressive industrial environments.V75J has been developed to provide outstanding resistance to hot water and steam (above 150°C/302°F) without the use of litharge (lead oxide) curatives.V75J also offers superior resistance to acids, oils, coolants and hydraulic fluids, making it ideal for use in chemical processing equipment and certain critical diesel engine locations.Key Attributes Excellent resistance to hot water and steam Excellent resistance to oils, fuels and hydraulic fluids High temperature performance Superior long-term sealing performance Typical Applications Marine diesel engines (valve seats & liner rings) Heat exchangers Paper/pulp processing equipment Hot water/steam systems

Fluoroelastomer Rubber, 76-85 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. To meet ASTM D2000 line call-out:- M2HK810, A1-10, B37, B38, EF31, EO78, F15, Z1. Where Z1 = compression set 30% max. ASTM designation = FKM. ISO designation = FPM.Excellent resistance to oils, fuels and hydraulic fluids at high temperature.

N70M is a NBR copolymer that provides excellent resistance to petroleum based oils and fuels.N70M has been developed to offer excellent mechanical properties such as compression set, tear and abrasion resistance, making it ideal for dynamic applications. Good water resistance is also a characteristic of this material.Meets BS2751 BA70 and ASTM D2000/SAE J200 line call-out M2BG 714, B14, EA14, EF11, EF21, EO14, EO34 and F17.Key Attributes Low temperature flexibility Stability to mineral oils and hydraulic fluids Good resilience Typical Applications Topside pipe systems General purpose sealing applications

N93H is a Copolymer of acrylonitrile and butadiene with a high ACN content of >45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N93H is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code HN90.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace applications

Nitrile Rubber, 85-95 °IRHD. Meets British Standard BS2751 BA90. Medium acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. ASTM designation = NBR. ISO designation = NBR.Excellent resistance to petroleum based oils and fuels. Excellent compression set, tear and abrasion resistance. Good water resistance but poor against ozone and weather.

Off-white Fluoroelastomer Rubber, 70-80 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. With additional anti friction agents. Formulated using only those ingredients determined by the United States Food and Drug Administration (FDA) Water and n-Hexane extraction tested in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600. Also complies to the requirements of USP 25, NF20, 2002, Class 6.Excellent resistance to oils, fuels and hydraulic fluids at high temperature.

Brown Fluoroelastomer Rubber, 70-80 IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. To meet ASTM D2000 line call-out:- M2HK710, A1-10, B37, B38, EF31, EO78, F15, Z1, Z2. Z1 = comp-set 30% max. Z2 = brown. ASTM designation = FKM. ISO designation = FPM.Excellent resistance to oils, fuels and hydraulic fluids at high temperatures.

N63B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N63B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN60.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace applications

V75W is a copolymer FKM elastomer material suitable for repeated use in equipment associated with the production of dry, aqueous and fatty foodstuffs intended for human consumption.Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA), V75W has undergone extraction testing in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600.V75W also complies with the requirements of USP 25, NF20, 2002, Class 6 and has been tested in accordance with 3-A Sanitary Standards 18-03 Class 1.Key Attributes Low compression set provides long-term sealing performance. Excellent resistance to oils, fuels and hydraulic fluids. FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI <88> and USP <87> compliant 3-A Sanitary Standards 18-03 Class 1 compliant Free from Animal Derived Ingredients (ADI-free) Typical Applications Pharmaceutical and bio-analytical equipment Food processing equipment Industrial applications (eg. paint spray and printing)

N93B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N93B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN90.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace Applications

Nitrile Butadiene Rubber (NBR), 65-75 °IRHD. Ultra-Low acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. To meet ASTM D2000/SAE J200 line call-out: MBF710, B34, F19.Specifically formulated for use in pure air systems. The low acrylonitrile content of this compound provides excellent resistance to mineral oil, alcohol, paraffin and low-aromatic petrol in sub-zero temperature applications. Not recommended for use with acetone, benzene, chlorinated solvents or high-aromatic petrol. Good water resistance but poor against ozone and weather.