Products

V74C is a fluoroelastomer (FKM) material developed to offer extremely low compression set combined with excellent heat aging properties.V74C has been engineered to retain its mechanical properties significantly longer than conventional FKM grades even under extreme temperature cycling, thereby providing increased service life and significantly lower the cost of ownership.V74C exhibits good resistance to acids and aqueous media, and excellent resistance to oil, fuels and hydraulic fluids at high temperature.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes Extremely low compression set and cumulative compression set providing extended seal life Excellent long-term high temperature stability Superior heat aging properties for long-term sealing Typical Applications Vacuum pumps & compressors (high temperature applications) Mechanical seals Chemical pumps and valves Couplings and quick connectors

N70F is a copolymer of acrylonitrile and butadiene, formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA) to be in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600 and Section 180.22.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter), gaskets and custom designed components.Key Attributes FDA compliant - extraction tested to CFR 21 § 177.2600 (e,f) 3A Sanitary Standard 18-03 Class 2 compliant Free from Animal Derived Ingredients Typical Applications Recommended for use in equipment associated with the production of foodstuffs intended for human consumption. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Valves Pumps Metering equipment

Perlast® ICE G75LT offers a unique combination of excellent chemical resistance and low temperature performance. This perflouroelastomer material has been specifically developed to perform under extreme conditions, in temperatures as low as -46°C (-51°F).Perlast® ICE G75LT has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in valves, pumps and mechanical seals.Ideal for use in exploration and completion applications and equipment operating or stored in sub-zero conditions. Perlast® ICE G75LT is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft internal diameter) and custom shapes.Key Attributes Excellent low-temperature sealing capability Good high temperature resistance Low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Good mechanical properties Typical Applications Aerospace - static O-rings Chemical processing - pumps & valves Mechanical seals Downstream refinery & petrochem equipment Cryogenic equipment Gas storage & transportation Oil & Gas - subsea equipment Completion tools Drilling tools (deepwater) Pipe connectors Pumps, valves & compressors

E80Q is a peroxide-cured, Ethylene Propylene Terpolymer material formulated using only those ingredients determined by the US Food and Drug Administration (FDA). E80Q is suitable for use in food contact applications requiring FDA and 3A compliance.E80Q provides excellent water and steam resistance and good compression set properties. The material's heat and chemical resistance is superior to that of sulfur-cured EPDM.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter), gaskets and custom designed components.Key Attributes FDA compliant to CFR 21 § 177.2600 (a-d) 3A Sanitary Standard 18-03 Class 2 compliant Free from Animal Derived Ingredients (ADI) Typical AttributesRecommended for use in food and dairy applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Valves Pumps Metering equipment

E70Q is a peroxide-cured, Ethylene Propylene Terpolymer material suitable for use in all types of applications requiring FDA, USP and 3A compliance. It is suitable for use in all food contact applications including dry, aqueous and fatty* media. E70Q provides excellent water and steam resistance and is widely used in equipment associated with the production of foodstuffs intended for human consumption and biomedical applications. Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter), gaskets and custom designed components.Key Attributes FDA compliant - extraction tested to CFR 21 § 177.2600 (e,f) USP Class VI <88> and USP <87> compliant 3A Sanitary Standard 18-03 Class 2 compliant Free from Animal Derived Ingredients (ADI) Typical ApplicationsRecommended for use in food, dairy, biomedical and pharmaceutical applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Valves Pumps Metering equipment

V70SW is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V70SW provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V70SW can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Key Attributes Excellent steam resistance up to 200°C Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

V75SR is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V75SR provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V75SR can be used for all types of applications requiring FDA, 3A and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes Excellent steam resistance up to 200°C (+392°F) Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600 (e,f) 3A Sanitary Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)