Products

Perlast® ICE G90LT offers a unique combination of excellent chemical resistance, explosive decompression resistance and low temperature capability down to -46°C (-51°F).Perlast® ICE G90LT has been formulated to provide excellent resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perflouroelastomer has a low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in valves, pumps and mechanical seals.Ideal for use in exploration and completion applications and equipment operating or stored in sub-zero conditions. Perlast® ICE G90LT is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft internal diameter) and custom shapes.Key Attributes Excellent explosive decompression resistance Tested to NORSOK M710 standard Exceptional resistance to methanol, sour gas, hot water, steam, oils, acids and amines beyond that of conventional TFE/P (Aflas ® ) and FKM polymers Excellent low-temperature sealing capability Suitable for use in API 6A & 6D wellhead equipment and valves. Good mechanical properties Good high temperature resistance. Typical Applications Drilling tools (deepwater) Wellhead equipment Completion tools Pipe connectors Downstream refinery & petrochem equipment Pumps Valves Compressors Mechanical seals

N70F is a copolymer of acrylonitrile and butadiene, formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA) to be in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600 and Section 180.22.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter), gaskets and custom designed components.Key Attributes FDA compliant - extraction tested to CFR 21 § 177.2600 (e,f) 3A Sanitary Standard 18-03 Class 2 compliant Free from Animal Derived Ingredients Typical Applications Recommended for use in equipment associated with the production of foodstuffs intended for human consumption. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Valves Pumps Metering equipment

Perlast® G74S has been specifically developed to cope with a wide range of process media, potent active pharmaceutical ingredients (API's) and aggressive cleaning agents, being especially suited to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels. G74S is also suitable for other critical applications such as Water-For-Injection (WFI) systems.Perlast® G74S can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Perlast® G74S is suitable for both dynamic and static applications and can be molded into O-rings and custom shapes.Key Attributes Excellent chemical resistance to a wide range of chemicals Superior mechanical properties High tensile strength makes G74S ideal for dynamic applications Excellent steam resistance (ASME BPE 2000) FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI <88> and USP <87> compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients (ADI) Typical Applications Dynamic seals Static seals

Perlast® G75S has been specifically developed to cope with a wide range of process media, potent active pharmaceutical ingredients (API's) and aggressive cleaning agents, being especially suited to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels. G75S is also suitable for other critical applications such as Water-For-Injection (WFI) systems.Perlast® G75S is an all round material that can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Unlike other FDA compliant elastomers, Perlast® G75S is thermally stable at higher temperatures, and is ideal for use in applications which require exposure to temperatures up to 310°C (590°F) making it suitable for use in Stage II Sterilization processes.Perlast® G75S is suitable for both dynamic and static applications and can be molded into O-rings and custom shapes.Key Attributes Excellent chemical resistance to a wide range of chemicals Superior mechanical properties High elongation at break assists installation High tensile strength makes G75S ideal for dynamic applications Excellent steam resistance (ASME BPE 2000) FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI <88> and USP <87> compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients (ADI) Typical Applications Dynamic seals Static seals

Perlast® ICE G75LT offers a unique combination of excellent chemical resistance and low temperature performance. This perflouroelastomer material has been specifically developed to perform under extreme conditions, in temperatures as low as -46°C (-51°F).Perlast® ICE G75LT has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in valves, pumps and mechanical seals.Ideal for use in exploration and completion applications and equipment operating or stored in sub-zero conditions. Perlast® ICE G75LT is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft internal diameter) and custom shapes.Key Attributes Excellent low-temperature sealing capability Good high temperature resistance Low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Good mechanical properties Typical Applications Aerospace - static O-rings Chemical processing - pumps & valves Mechanical seals Downstream refinery & petrochem equipment Cryogenic equipment Gas storage & transportation Oil & Gas - subsea equipment Completion tools Drilling tools (deepwater) Pipe connectors Pumps, valves & compressors

E80Q is a peroxide-cured, Ethylene Propylene Terpolymer material formulated using only those ingredients determined by the US Food and Drug Administration (FDA). E80Q is suitable for use in food contact applications requiring FDA and 3A compliance.E80Q provides excellent water and steam resistance and good compression set properties. The material's heat and chemical resistance is superior to that of sulfur-cured EPDM.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter), gaskets and custom designed components.Key Attributes FDA compliant to CFR 21 § 177.2600 (a-d) 3A Sanitary Standard 18-03 Class 2 compliant Free from Animal Derived Ingredients (ADI) Typical AttributesRecommended for use in food and dairy applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Valves Pumps Metering equipment

E70Q is a peroxide-cured, Ethylene Propylene Terpolymer material suitable for use in all types of applications requiring FDA, USP and 3A compliance. It is suitable for use in all food contact applications including dry, aqueous and fatty* media. E70Q provides excellent water and steam resistance and is widely used in equipment associated with the production of foodstuffs intended for human consumption and biomedical applications. Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter), gaskets and custom designed components.Key Attributes FDA compliant - extraction tested to CFR 21 § 177.2600 (e,f) USP Class VI <88> and USP <87> compliant 3A Sanitary Standard 18-03 Class 2 compliant Free from Animal Derived Ingredients (ADI) Typical ApplicationsRecommended for use in food, dairy, biomedical and pharmaceutical applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Valves Pumps Metering equipment

V70SW is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V70SW provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V70SW can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Key Attributes Excellent steam resistance up to 200°C Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

V75SR is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V75SR provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V75SR can be used for all types of applications requiring FDA, 3A and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes Excellent steam resistance up to 200°C (+392°F) Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600 (e,f) 3A Sanitary Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

N70M is a NBR copolymer that provides excellent resistance to petroleum based oils and fuels.N70M has been developed to offer excellent mechanical properties such as compression set, tear and abrasion resistance, making it ideal for dynamic applications. Good water resistance is also a characteristic of this material.Meets BS2751 BA70 and ASTM D2000/SAE J200 line call-out M2BG 714, B14, EA14, EF11, EF21, EO14, EO34 and F17.Key Attributes Low temperature flexibility Stability to mineral oils and hydraulic fluids Good resilience Typical Applications Topside pipe systems General purpose sealing applications