Products

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

EPOTUF® 37-100 epoxy resin is a medium viscosity, 100% reactive, diluted liquid epoxy resin containing EPOTUF® 37-051.

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

RESAFEN® 13-027 is a liquid cresilic resin designed mainly for inner can coating

AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

BECKOSOL® 15-105 is a castor oil alkyd resin designed mainly for non oxidative air dry industrial enamels, pigment dispersion, 2 component clears, NC Lacquers.

BECKOSOL® 10-029 is a long-oil alkyd at 70% non-volatile in mineral spirits for use in quality gloss enamels.

BECKOSOL® P470 is a versatile long soya oil alkyd resin designed mainly for architectural coatings.

UROTUF® L56-MPW-36 is a fully reacted, aqueous dispersion of an aliphatic urethane polymer containing no free isocyanate groups.

BECKOSOL® 12-079 is a phenolic modified alkyd designed for use with flash-dry primers intended to be used under enamel and lacquer topcoats.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

EPOTUF® 10-503 TMPTA 85/15 is a reactive epoxy-acrylic with 15% TMPTA (trimethylolpropane triacrylate). EPOTUF® 10-503 TMPTA 85/15 is specially designed for coatings cured by “Ultra-Violet (U.V.)” irradiation applied through printing systems as offset system, serigraphy and metallographic. It can also be used in coatings, varnishes and primers for wood and plastics.

BECKOSOL® 15-217 is a versatile coconut oil alkyd resin designed mainly for industrial coatings.

EPOTUF® 37-140 is the standard, undiluted, general purpose, diglycidyl ether of Bisphenol-A epoxy resin.

AROLON® 820-W-49 is a thermoplastic, styrene acrylic emulsion designed for air dry applications.

UROTUF® L53-MPW-30 is a fully reacted, color-retentive, thermoplastic, urethane dispersed in a blend of water and N-methyl pryrrolidone.

EPOTUF® 38-692 is a water-dispersible epoxy ester resin for metal primer applications. This resin is supplied at 70% non-volatile in butoxy ethanol and requires neutralization with ammonium hydroxide or amines prior to dispersing in water. This resin exhibits good compatibility with inhibitive pigments. Temperatures during the grind phase should not exceed 140 F.

BECKOSOL® 15-215 is a short soya oil alkyd resin designed mainly for 2 component architectural clears and NC lacquers, industrial coatings and car refinish.

BECKOSOL® CS60 is a versatile short soya oil alkyd resin designed mainly for industrial coatings and car refinish.

BECKOSOL®Alkyd We are not able to market the Beckosol brand name in the Asia Pacific region . We offer our Alkyd line in this region thru the REICHHOLD® brand name . Please refer to our All Products Listing for alkyds in other regions and consult with your local representative for the product to meet your need.

BECKOSOL® 10-539 is a high-solids, long-oil alkyd developed for use in VOC-compliant architectural enamels, maintenance coatings, and metal primers.

RESAFEN® 17-313 is a maleic modified rosin resin designed mainly for modification in industrial and architectural varnishes and enamels. It is a hard resin soluble in aromatics, acetates and secative oils and partially soluble in mineral spirits. RESAFEN® 17-313 is also recommended for sealers and printing inks and varnishes.

KELSOL® 3966-B2G-70 is a water-dispersible, low-cost, chain-stopped alkyd designed to give excellent corrosion resistance and hot hardness.

BECKOSOL® 15-254 is a versatile long oil alkyd resin designed mainly for architectural and industrial primer and enamels.

AMBERLAC® 15-264 is resinous phenolic oil diluted in aromatic solvents, developed to be used as a vehicle for aluminum paints and quick drying inks. This product features excellent gloss and adhesion and is appropriate for air dry or forced cure enamels, primers, varnishes, interior drums enamels, roller applied paints or as a grinding vehicle.

BECKOSOL® P-531-HV is a medium alkyd resin, soyabean and tung oil in mineral spirits

UROTUF® F99-MPW-36 is an anionic stabilized oil modified urethane polymer provided at 36% solids in a blend of N-methyl pyrrolidinone and water.

EPOTUF® 20-014 is an epoxy ester resin based on EPOTUF® 20-009 at 50% solids in xylene, designed for baking and air drying primers and enamels.

SUPER RESANITE® 1003 is a reactive alkyl phenolic resin for alkyd and oil modification.

SYNTHEMUL® 90-416 is a high performance; ultra-low VOC acrylic latex ideal for cosolvent-free exterior house and trim paints. Performance features include alkyd-like adhesion to a variety of difficult substrates, particularly chalky surfaces and aged gloss alkyd. SYNTHEMUL® 90-416 can be formulated at less than 20 gram/liter VOC, giving the paint formulator more latitude in meeting current and future environmental regulations.

SYNTHEMUL® 40-136 is a 55%-solids, conventional, vinyl acrylic latex copolymer that provides excellent paint viscosity, low-temperature film formation, and ease of formulation.

SYNTHEMUL® 40152-08 is a 55% solids, high-scrub vinyl, acetate acrylic latex designed for interior architectural coatings.