Products

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

EPOTUF® 37-100 epoxy resin is a medium viscosity, 100% reactive, diluted liquid epoxy resin containing EPOTUF® 37-051.

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

AROLON® 6473 is an acrylic polyol resin designed for use in high performance, two component polyurethane coatings. AROLON® 6473 is non-HAP and higher solids version of AROLON® 6472.

UROTUF® F982-MPW-33 is an anionic water-borne oil modified urethane coating resin provided at 32% solids in a blend of N-methyl pyrrolidinone and water. This resin is similar to Urotuf F97-33 but has the metallic drier already incorporated for convenience.

FINE-CLAD® M-8023 is a general purpose, hydroxyl-functional polyester. It is designed to cure by urethane crosslinkers.

KELSOL® 15-173 is a chemically modified, linseed oil supplied in butoxy ethanol. It contains no water as supplied, but can be diluted with water without the addition of a neutralizer

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

FINE-CLAD® M-8711 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

EPOTUF® 37-140 is the standard, undiluted, general purpose, diglycidyl ether of Bisphenol-A epoxy resin.

AROLON® 820-W-49 is a thermoplastic, styrene acrylic emulsion designed for air dry applications.

EPOTUF® 38-505 is a solvent cut of EPOTUF® 37-001 at 75% solids in xylene

UROTUF® F78-M-50 & F78-X-50 are one-package, oil modified urethanes ASTM Type I, which cure by oxidation at ambient temperatures in the presence of metallic driers. They may be blended with alkyds to improve dry time and abrasion resistance. They contains no free isocyanate.

AROPLAZ® 6126-Z-65 is a linear saturated polyester for flexible melamine crosslinked baking enamels.

AMBERLAC® 13-031 is a styrene-modified alkyd resin for use in air or force-dry enamels.

AROLON® 559-G4-70 is a non-oxidizing, water-dispersible, acrylic resin for formulating thermosetting coatings crosslinked with aminoplast resins. The uncrosslinked polymer is a hard film former. AROLON® 559 is cut in 2 butoxy ethanol and gives improved viscosity reduction. The resin should be neutralized with a volatile amine before dilution with water.

AROPLAZ® 4097-WG4-55 is a water-dispersible, acrylic-modified polyester resin for formulating low-VOC coatings crosslinked with aminoplast resins. No additional coupler solvent, beyond that supplied with the resin, is required.

EPOTUF® 91-263 is a non-HAPs, water-reducible epoxy ester which, when neutralized with the proper amines, can be formulated into VOC-compliant coatings.

UROTUF® F19-M-50 is a fast-drying, oil modified polyurethane solution characterized by extremely pale color both in solution and in films.

SYNTHEMUL® 40-136 is a 55%-solids, conventional, vinyl acrylic latex copolymer that provides excellent paint viscosity, low-temperature film formation, and ease of formulation.

SYNTHEMUL® 90-416 is a high performance; ultra-low VOC acrylic latex ideal for cosolvent-free exterior house and trim paints. Performance features include alkyd-like adhesion to a variety of difficult substrates, particularly chalky surfaces and aged gloss alkyd. SYNTHEMUL® 90-416 can be formulated at less than 20 gram/liter VOC, giving the paint formulator more latitude in meeting current and future environmental regulations.

EPOTUF® 38-694 is an aqueous dispersion of an epoxy ester resin designed to formulate with lower co-solvent demand than standard water reducible epoxy ester resins. EPOTUF® 38-694 is an extremely stable water soluble resin giving up to 20 plus weeks in a white enamel at 120 F. This resin can be used in high gloss enamels or primers

FINE-CLAD® M-8761 is a pre-catalyzed carboxyl functional polyester designed to cure with bisphenol-A type epoxy curatives at a 50/50 polyester to epoxy ratio for hybrid systems.

AROLON® 847-W-42 is a styrenated acrylic emulsion designed to provide early water-spot resistance and very good corrosion resistance coupled with inhibitive pigment stability. It offers early water-spot resistance, high gloss and good chemical resistance.

AROPLAZ® 6749-XA6-90 is an economical, high-solids, saturated polyester resin that produces films with an excellent hardness/flexibility relationship when crosslinked with an appropriate aminoplast resin.

Thermoplastic polymer emulsion offering fast air dry and excellent water and humidity resistance.

FINE-CLAD® M-8911 is a superdurable carboxyl polyester designed to cure by triglycidyl isocyanurate (TGIC) crosslinkers for excellent weathering resistance

SYNTHEMUL® 40-416 is high-performance acrylic latex ideal for exterior house and trim paints. Performance features include alkyd-like adhesion to a variety of difficult substrates, particularly chalky surfaces and aged gloss alkyd. 40-416 based paints have excellent early water resistance and also show superior efflorescence resistance thus are good for masonry/cementitious surfaces.