Products

BECKOSOL AQ 205 is a medium oil alkyd latex based on bio-renewable oils that combines good through-cure speed with positive tack-free surface dry. BECKOSOL AQ 205 requires no coalescing solvent for film formation and produces AIM compliant coatings that develop the performance of traditional solvent-borne products. BECKOSOL AQ 205 does not contain alkyl phenol ethoxylates.

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

EPOTUF® 38-690 is an epoxy ester solution which, when neutralized with an organic amine, can be formulated into VOC-compliant, water-based primers and enamels for air dry and bake applications

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

EPOTUF® 37-100 epoxy resin is a medium viscosity, 100% reactive, diluted liquid epoxy resin containing EPOTUF® 37-051.

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

BECKOSOL® 90-185 is a high-solids, short-oil, non-drying, coconut-oil alkyd supplied at 80% non volatile in methyl propyl ketone and n-butyl acetate.

BECKOSOL® 2575-T-60 is a short coconut alkyd resin solution for use as a baking vehicle in combination with melamine resins or as a plasticizer for nitrocellulose, butyrate, or vinyl lacquers.

UROTUF® L57-MPW-35 is an anionic stabilized dispersion of an aliphatic urethane polymer provided at 35% solids in a blend of N-methyl pyrrolidone and water.

UROTUF F90-E3M-55 is a soybean oil modified urethane resin provided at 55% solids in a blend of low aromaticMineral Spirits and volatile methyl siloxane (exempt).solvent

BECKOSOL® VPW 2037-100 is a modified long oil alkyd based on linseed oil.

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

BECKOSOL® 11-090 is a medium oil soya alkyd supplied at 60% non-volatile in VM&P naphtha.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

KELSOL® 15-173 is a chemically modified, linseed oil supplied in butoxy ethanol. It contains no water as supplied, but can be diluted with water without the addition of a neutralizer

UROTUF® L56-MPW-36 is a fully reacted, aqueous dispersion of an aliphatic urethane polymer containing no free isocyanate groups.

FINE-CLAD® M-8023 is a general purpose, hydroxyl-functional polyester. It is designed to cure by urethane crosslinkers.

UROTUF F101-MPW-45 is a high solids anionic stabilized oil modified urethane polymer provided at 45% solids in a blend of N-methyl pyrrolidinone and water.

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

FINE-CLAD® M-8711 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

AROFLINT® 809 is a high acid value polyester supplied at 71% solids in a HAPs compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

AROLON® 6473 is an acrylic polyol resin designed for use in high performance, two component polyurethane coatings. AROLON® 6473 is non-HAP and higher solids version of AROLON® 6472.

BECKOSOL® 11-081 is a medium oil soya alkyd for both air-dry and bake systems.

BECKOSOL AQ 400 is a short oil chain-stopped alkyd latex based on a biorenewable oil specifically designed for non-highway pavement marking paint. BECKOSOL AQ 400 requires no coalescing solvent for film formation and is free of alkyl phenol ethoxylates.

UROTUF® F982-MPW-33 is an anionic water-borne oil modified urethane coating resin provided at 32% solids in a blend of N-methyl pyrrolidinone and water. This resin is similar to Urotuf F97-33 but has the metallic drier already incorporated for convenience.

UROTUF® L54-MPW-32 is a fully reacted, aliphatic, thermoplastic urethane dispersed in a blend of water, N-methylpyrrolidone, and amines. UROTUF® L54-MPW-32 is suitable for both air-dry and force-dry applications.

BECKOSOL® 10-029 is a long-oil alkyd at 70% non-volatile in mineral spirits for use in quality gloss enamels.

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

UROTUF F89-E3M-55 is a linseed oil modified urethane resin provided at 55% solids in a blend of low aromatic Mineral Spirits and volatile methyl siloxane (exempt) solvent.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

BECKOSOL® 6440-A4-85 is a medium-oil, chain-stopped alkyd designed for durable, high-solids, air-dry, industrial and maintenance coatings.