Products

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

SYNTHEMUL® PX-702 is a acrylic hard thermoplastic resin in MMA

BECKOSOL AQ 205 is a medium oil alkyd latex based on bio-renewable oils that combines good through-cure speed with positive tack-free surface dry. BECKOSOL AQ 205 requires no coalescing solvent for film formation and produces AIM compliant coatings that develop the performance of traditional solvent-borne products. BECKOSOL AQ 205 does not contain alkyl phenol ethoxylates.

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

FINE-CLAD® M-8710 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

EPOTUF® 38-690 is an epoxy ester solution which, when neutralized with an organic amine, can be formulated into VOC-compliant, water-based primers and enamels for air dry and bake applications

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

BECKOSOL® 90-185 is a high-solids, short-oil, non-drying, coconut-oil alkyd supplied at 80% non volatile in methyl propyl ketone and n-butyl acetate.

UROTUF F90-E3M-55 is a soybean oil modified urethane resin provided at 55% solids in a blend of low aromaticMineral Spirits and volatile methyl siloxane (exempt).solvent

BECKOSOL® 2575-T-60 is a short coconut alkyd resin solution for use as a baking vehicle in combination with melamine resins or as a plasticizer for nitrocellulose, butyrate, or vinyl lacquers.

UROTUF® L57-MPW-35 is an anionic stabilized dispersion of an aliphatic urethane polymer provided at 35% solids in a blend of N-methyl pyrrolidone and water.

RESAFEN® 13-027 is a liquid cresilic resin designed mainly for inner can coating

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

BECKOSOL® 11-090 is a medium oil soya alkyd supplied at 60% non-volatile in VM&P naphtha.

AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha.

AROPLAZ® 15-143 is an oil free saturated polyester resin recommended to formulate coil and can coatings and industrial finishing.

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

BECKOSOL® 15-105 is a castor oil alkyd resin designed mainly for non oxidative air dry industrial enamels, pigment dispersion, 2 component clears, NC Lacquers.

SYNTHEMUL® ATP 105 is a acrylic thermoplastic resin in Xylene and Toluene blended.

KELSOL® 15-173 is a chemically modified, linseed oil supplied in butoxy ethanol. It contains no water as supplied, but can be diluted with water without the addition of a neutralizer

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

UROTUF® L54-MPW-32 is a fully reacted, aliphatic, thermoplastic urethane dispersed in a blend of water, N-methylpyrrolidone, and amines. UROTUF® L54-MPW-32 is suitable for both air-dry and force-dry applications.

BECKOSOL® 10-029 is a long-oil alkyd at 70% non-volatile in mineral spirits for use in quality gloss enamels.

AMBERLAC® 4400 is a styrene modified alkyd resin, designed for industrial enamels

BECKOSOL® P470 is a versatile long soya oil alkyd resin designed mainly for architectural coatings.

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

FINE-CLAD® M-8711 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

BECKOSOL® 15-217 is a versatile coconut oil alkyd resin designed mainly for industrial coatings.

UROTUF F101-MPW-45 is a high solids anionic stabilized oil modified urethane polymer provided at 45% solids in a blend of N-methyl pyrrolidinone and water.

UROTUF® F982-MPW-33 is an anionic water-borne oil modified urethane coating resin provided at 32% solids in a blend of N-methyl pyrrolidinone and water. This resin is similar to Urotuf F97-33 but has the metallic drier already incorporated for convenience.

AROFLINT® 809 is a high acid value polyester supplied at 71% solids in a HAPs compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

BECKOSOL AQ 400 is a short oil chain-stopped alkyd latex based on a biorenewable oil specifically designed for non-highway pavement marking paint. BECKOSOL AQ 400 requires no coalescing solvent for film formation and is free of alkyl phenol ethoxylates.

EPOTUF® 10-503 TMPTA 85/15 is a reactive epoxy-acrylic with 15% TMPTA (trimethylolpropane triacrylate). EPOTUF® 10-503 TMPTA 85/15 is specially designed for coatings cured by “Ultra-Violet (U.V.)” irradiation applied through printing systems as offset system, serigraphy and metallographic. It can also be used in coatings, varnishes and primers for wood and plastics.