Products

SYNTHEMUL® PX-702 is a acrylic hard thermoplastic resin in MMA

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

BECKOSOL AQ 205 is a medium oil alkyd latex based on bio-renewable oils that combines good through-cure speed with positive tack-free surface dry. BECKOSOL AQ 205 requires no coalescing solvent for film formation and produces AIM compliant coatings that develop the performance of traditional solvent-borne products. BECKOSOL AQ 205 does not contain alkyl phenol ethoxylates.

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

EPOTUF® 38-690 is an epoxy ester solution which, when neutralized with an organic amine, can be formulated into VOC-compliant, water-based primers and enamels for air dry and bake applications

BECKOSOL® 90-185 is a high-solids, short-oil, non-drying, coconut-oil alkyd supplied at 80% non volatile in methyl propyl ketone and n-butyl acetate.

EPOTUF® 37-100 epoxy resin is a medium viscosity, 100% reactive, diluted liquid epoxy resin containing EPOTUF® 37-051.

AROPLAZ® 15-143 is an oil free saturated polyester resin recommended to formulate coil and can coatings and industrial finishing.

RESAFEN® 13-027 is a liquid cresilic resin designed mainly for inner can coating

BECKOSOL® 2575-T-60 is a short coconut alkyd resin solution for use as a baking vehicle in combination with melamine resins or as a plasticizer for nitrocellulose, butyrate, or vinyl lacquers.

BECKOSOL® VPW 2037-100 is a modified long oil alkyd based on linseed oil.

UROTUF F90-E3M-55 is a soybean oil modified urethane resin provided at 55% solids in a blend of low aromaticMineral Spirits and volatile methyl siloxane (exempt).solvent

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha.

UROTUF® F982-MPW-33 is an anionic water-borne oil modified urethane coating resin provided at 32% solids in a blend of N-methyl pyrrolidinone and water. This resin is similar to Urotuf F97-33 but has the metallic drier already incorporated for convenience.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

UROTUF® L56-MPW-36 is a fully reacted, aqueous dispersion of an aliphatic urethane polymer containing no free isocyanate groups.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

BECKOSOL® 6440-A4-85 is a medium-oil, chain-stopped alkyd designed for durable, high-solids, air-dry, industrial and maintenance coatings.

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

BECKOSOL® 11-081 is a medium oil soya alkyd for both air-dry and bake systems.

UROTUF F89-E3M-55 is a linseed oil modified urethane resin provided at 55% solids in a blend of low aromatic Mineral Spirits and volatile methyl siloxane (exempt) solvent.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

EPOTUF® 37-140 is the standard, undiluted, general purpose, diglycidyl ether of Bisphenol-A epoxy resin.

AROLON® 820-W-49 is a thermoplastic, styrene acrylic emulsion designed for air dry applications.

SYNTHEMUL® ATP 101 is a acrylic thermoplastic resin in Toluene

SYNTHEMUL® 90-416 is a high performance; ultra-low VOC acrylic latex ideal for cosolvent-free exterior house and trim paints. Performance features include alkyd-like adhesion to a variety of difficult substrates, particularly chalky surfaces and aged gloss alkyd. SYNTHEMUL® 90-416 can be formulated at less than 20 gram/liter VOC, giving the paint formulator more latitude in meeting current and future environmental regulations.

AMBERLAC® 13-037-60 is a soyabean oil alkyd resin modified with Vinyl Toluene monomer, in toluene.

BECKOSOL® 1271 is a 100% solids, long oil, linseed alkyd which offers a wide range of compatibility with other film formers.

BECKOSOL® 12-035 is a short oil, non-drying, coconut oil alkyd supplied at 60% non-volatile in xylene

BECKOSOL® 12054-E2 is a short oil TOFA alkyd supplied in tertiary butyl acetate and Aromatic 100 solvents. This is the same polymer as Beckosol® 12-054 (xylene).

UROTUF® L512 is a fully reacted, aliphatic, thermoplastic, urethane resin dispersed in a blend of water, n methylpyrrolidone, and amines and is suitable for both air dry and force dry applications. It is similar to UROTUF® L51 in many properties, but gives better chemical and stain resistance when used alone or when blended with acrylic emulsions.

AMBERLAC 4250-50-HV is a modified alkyd resin with styrene monomer